[Sat Aug 11 10:26:46 2012] Detection parameters:
  Position = (321.3, 325.9) = 0 18 32.04 16 27 11.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 220.8 +/- 20.1
  Background counts = 38.1
  Rate = 0.01 +/- 0.001

[Sat Aug 11 10:26:48 2012] Off-axis axis estimate = 2.59'
[Sat Aug 11 10:31:59 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 10:31:59 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Sat Aug 11 10:31:59 2012] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.869
[Sat Aug 11 10:31:59 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 7.72"
[Sat Aug 11 13:13:06 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_src17.ximg exists
[Sat Aug 11 13:13:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_src17.csv
[Sat Aug 11 13:13:06 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_src17_1.ximg exists
[Sat Aug 11 13:13:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_src17.csv
[Sat Aug 11 13:13:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 13:13:07 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sat Aug 11 13:13:07 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sat Aug 11 13:13:07 2012] Fit fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sat Aug 11 16:30:06 2012] Warning, spatial fit 17 centroid is now closest to src. 49
[Sat Aug 11 16:30:07 2012] Source 17 is offset by -2.059310 and -1.603939 pixels which is larger than
2 X fitted extent = 1.785922 x 1.785922, not incorporating fit results
[Sat Aug 11 16:30:07 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 16:30:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 16:30:07 2012] Assessing source extent using major
[Sat Aug 11 16:30:07 2012] Source does appear to be extended
[Sat Aug 11 16:30:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 16:30:07 2012] Source is confused with source 16
[Sat Aug 11 16:30:50 2012] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 16:30:50 2012] Initial guess for spatial extent in simple fitting = 7.72"
[Sat Aug 11 16:30:50 2012] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.869
[Sat Aug 11 16:30:50 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 7.72"
[Sat Aug 11 18:09:44 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_src17.ximg exists
[Sat Aug 11 18:09:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_src17.csv
[Sat Aug 11 18:09:44 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_src17_1.ximg exists
[Sat Aug 11 18:09:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_src17.csv
[Sat Aug 11 18:09:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 18:09:45 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sat Aug 11 18:09:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sat Aug 11 18:09:45 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sat Aug 11 18:09:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sat Aug 11 18:09:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 21:10:49 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 17.748084 pixels away
[Sat Aug 11 21:10:49 2012] Warning, spatial fit 17 centroid is now closest to src. 56
[Sat Aug 11 21:10:49 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 21:10:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 21:10:49 2012] Assessing source extent using major
[Sat Aug 11 21:10:49 2012] Source does appear to be extended
[Sat Aug 11 21:10:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 21:11:36 2012] XMMSAS src. selection expression = ellipse(27901.604065, 28304.377319, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Aug 11 21:11:36 2012] Writing source region out to fullrun_pn_xmm0111000101_pi300-10000_pass1_cl_src17_src.reg
[Sat Aug 11 21:11:36 2012] Extracting stamp from image fullrun_pn_xmm0111000101_pi300-10000_cl_sm2.00.img.gz, (284, 288) - (359, 363)
[Sat Aug 11 21:11:36 2012] XMMSAS bgd. selection expression = annulus(27901.604065, 28304.377319, 1087.500000, 2175.000000, X, Y) && !ellipse(27632.952000, 26905.696000, 2502.576072, 2502.576072, 0.000000, X, Y) && !ellipse(27977.636760, 30863.250800, 457.314413, 457.314413, 0.000000, X, Y) && !ellipse(27368.174164, 28572.625549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28788.262000, 25756.430000, 1251.288036, 1251.288036, 0.000000, X, Y) && !ellipse(27124.179626, 29523.577393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26372.102753, 28892.705261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28792.002655, 27984.313538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29467.598755, 27670.207642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29122.162000, 25097.436000, 1212.128035, 1212.128035, 0.000000, X, Y) && !ellipse(27236.564000, 25055.558000, 1256.304036, 1256.304036, 0.000000, X, Y)
[Sat Aug 11 21:11:36 2012] Writing fullrun_pn_xmm0111000101_pi300-10000_pass1_cl_src17.gif
[Sat Aug 11 21:45:01 2012] Mean detx,y = (-114.64, -1359.43) 
[Sat Aug 11 21:45:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 11 21:45:38 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 11 21:45:39 2012] Setting source spectrum file to fullrun_pn_xmm0111000101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Aug 11 21:45:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111000101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sun Aug 12 10:10:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Aug 12 10:10:13 2012] rmf not generated due to insufficient counts
[Sun Aug 12 15:42:13 2012] Updating aperture counts using extracted products
[Sun Aug 12 15:42:13 2012] Error reading totcts from fullrun_pn_xmm0111000101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Aug 12 15:42:16 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 15:42:16 2012] Using photon index=1.80, rate=0.0105, arf fullrun_pn_xmm0111000101_pi300-10000_pass1_cl_src17.arf
[Sun Aug 12 15:42:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 15:42:16 2012] Updating source flux to 3e-14
[Sun Aug 12 15:45:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting