[Sat Aug 11 10:26:45 2012] Detection parameters:
  Position = (318.0, 310.0) = 0 18 33.02 16 26 8.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2971.7 +/- 66.8
  Background counts = 39.2
  Rate = 0.1 +/- 0.003

[Sat Aug 11 10:26:48 2012] Off-axis axis estimate = 1.65'
[Sat Aug 11 10:31:59 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 10:31:59 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Sat Aug 11 10:31:59 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Sat Aug 11 10:31:59 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Sat Aug 11 13:13:06 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Aug 11 13:13:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_src1.csv
[Sat Aug 11 13:13:06 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Aug 11 13:13:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_src1.csv
[Sat Aug 11 13:13:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 13:13:06 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Aug 11 13:13:06 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Aug 11 13:13:06 2012] Fit fullrun_pn_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Aug 11 16:30:06 2012] Spatial fit model total counts = 9668.360000, observed total counts = 9642.000000
[Sat Aug 11 16:30:06 2012] Offset between fit and detection position for source 1 = 0.870649 pixels
[Sat Aug 11 16:30:06 2012] 9692.920000 total counts/ 6588.280000 bgd. counts: snr = 38.249453
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.870649 pixels
  Position = (317.1, 310.0) = 0 18 33.29 16 26 8.3
  Extent = 14.5 (14.5-29.0)", rotation angle = 0
  Source counts = 3104.6 +/- 98.5
  Background counts = 6588.3
  Rate = 0.1 +/- 0.003
[Sat Aug 11 16:30:07 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 16:30:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 16:30:07 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 16:30:07 2012] Source does appear to be extended
[Sat Aug 11 16:30:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 16:30:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 11 16:30:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug 11 16:30:50 2012] Initial guess for spatial extent in simple fitting = 14.51"
[Sat Aug 11 16:30:50 2012] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.088
[Sat Aug 11 16:30:50 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.51"
[Sat Aug 11 18:09:44 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Aug 11 18:09:44 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Aug 11 18:09:44 2012] Fit fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Aug 11 18:09:44 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Aug 11 18:09:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Aug 11 18:09:44 2012] fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Aug 11 18:09:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Aug 11 18:09:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 21:10:49 2012] Warning, spatial fit 1 centroid is now closest to src. 17
[Sat Aug 11 21:10:49 2012] Spatial fit model total counts = 4386.720000, observed total counts = 4381.000000
[Sat Aug 11 21:10:49 2012] Offset between fit and detection position for source 1 = 1.056832 pixels
[Sat Aug 11 21:10:49 2012] Warning, changing simple spatial fit ID from 1 to 27
[Sat Aug 11 21:10:49 2012] 4346.200000 total counts/ 2491.410000 bgd. counts: snr = 37.159695
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.056832 pixels
  Position = (318.2, 309.8) = 0 18 32.97 16 26 7.5
  Extent = 31.3 (31.2-62.6)", rotation angle = 0
  Source counts = 1854.8 +/- 65.9
  Background counts = 2491.4
  Rate = 0.06 +/- 0.002
[Sat Aug 11 21:10:49 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 21:10:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 21:10:49 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 21:10:49 2012] Source does appear to be extended
[Sat Aug 11 21:10:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 21:10:50 2012] Source is confused with source 16
[Sat Aug 11 21:10:50 2012] Source is confused with source 17
[Sat Aug 11 21:10:50 2012] Source is confused with source 29
[Sat Aug 11 21:10:50 2012] Source is confused with source 51
[Sat Aug 11 21:11:35 2012] Counts = 1854.790000, rescaling region sizes by 2.000000
[Sat Aug 11 21:11:35 2012] XMMSAS src. selection expression = ellipse(27632.952000, 26905.696000, 3753.864108, 3753.864108, 0.000000, X, Y)
[Sat Aug 11 21:11:35 2012] Writing source region out to fullrun_pn_xmm0111000101_pi300-10000_pass1_cl_src1_src.reg
[Sat Aug 11 21:11:35 2012] Extracting stamp from image fullrun_pn_xmm0111000101_pi300-10000_cl_sm2.00.img.gz, (102, 94) - (534, 526)
[Sat Aug 11 21:11:35 2012] XMMSAS bgd. selection expression = annulus(27632.952000, 26905.696000, 12512.880360, 25025.760720, X, Y) && !ellipse(19974.282639, 27706.387726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19359.234482, 15665.770126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25169.012600, 20201.567400, 466.004013, 466.004013, 0.000000, X, Y) && !ellipse(14401.881440, 19865.826600, 435.169613, 435.169613, 0.000000, X, Y) && !ellipse(26170.556824, 19690.100250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16511.400200, 18228.596000, 523.822415, 523.822415, 0.000000, X, Y) && !ellipse(27977.636760, 30863.250800, 457.314413, 457.314413, 0.000000, X, Y) && !ellipse(11837.209915, 33111.249451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32228.760193, 16742.489380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34238.258942, 34411.074799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26474.982483, 37271.367065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24043.121674, 36062.895966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22260.731476, 15154.400864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21788.874359, 28981.391205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27368.174164, 28572.625549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27901.604065, 28304.377319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36313.856000, 15362.830000, 2029.016058, 2029.016058, 0.000000, X, Y) && !ellipse(21054.771800, 22170.254000, 474.414414, 474.414414, 0.000000, X, Y) && !ellipse(20848.315628, 20912.450516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28154.838104, 20435.647079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30931.447576, 19212.590704, 552.580391, 410.683765, 5.305927, X, Y) && !ellipse(22059.449722, 18659.366104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16495.790695, 15783.087906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36908.490200, 39249.216600, 514.126415, 514.126415, 0.000000, X, Y) && !ellipse(21136.309311, 42009.131439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22776.743800, 29073.957000, 390.182411, 390.182411, 0.000000, X, Y) && !ellipse(28788.262000, 25756.430000, 1251.288036, 1251.288036, 0.000000, X, Y) && !ellipse(11810.846802, 21445.082581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15172.671448, 42296.341888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26275.326935, 42568.840820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26539.539520, 38982.907806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34794.166321, 34526.850006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21364.621918, 31371.998169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31492.148865, 30957.091431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18246.093536, 30016.672089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27124.179626, 29523.577393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26372.102753, 28892.705261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28792.002655, 27984.313538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29467.598755, 27670.207642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34361.757629, 26656.042206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24200.622000, 26321.083600, 519.624015, 328.303209, 67.738229, X, Y) && !ellipse(25542.546000, 25002.870000, 1066.936031, 1066.936031, 0.000000, X, Y) && !ellipse(29122.162000, 25097.436000, 1212.128035, 1212.128035, 0.000000, X, Y) && !ellipse(27236.564000, 25055.558000, 1256.304036, 1256.304036, 0.000000, X, Y) && !ellipse(23525.616638, 22297.753204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32943.966675, 16385.856552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22719.549744, 13592.139145, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 11 21:11:35 2012] Writing fullrun_pn_xmm0111000101_pi300-10000_pass1_cl_src1.gif
[Sat Aug 11 21:12:18 2012] Mean detx,y = (150.04, -30.66) 
[Sat Aug 11 21:12:33 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 11 21:29:12 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 11 21:29:13 2012] Setting source spectrum file to fullrun_pn_xmm0111000101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Aug 11 21:29:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111000101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Aug 12 15:42:12 2012] Updating aperture counts using extracted products
[Sun Aug 12 15:42:12 2012] Error reading totcts from fullrun_pn_xmm0111000101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug 12 15:42:15 2012] No arf file for this source, not re-computing flux
[Sun Aug 12 15:45:07 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Sun Aug 12 15:45:07 2012] Source 1 has no response, skipping
[Sun Aug 12 15:47:10 2012] xmm0111000101/analysis//spectral/fullrun_pn_xmm0111000101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete