[Sat Aug 11 10:28:20 2012] Detection parameters:
  Position = (270.7, 257.5) = 0 18 47.33 16 22 21.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.5 +/- 8.1
  Background counts = 8.5
  Rate = 0.001 +/- 0.0003

[Sat Aug 11 10:28:20 2012] Off-axis axis estimate = 3.59'
[Sat Aug 11 14:39:54 2012] Using EEF radius (= 8.22 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 14:39:54 2012] Initial guess for spatial extent in simple fitting = 8.22"
[Sat Aug 11 14:39:54 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.094
[Sat Aug 11 14:39:54 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 8.22"
[Sat Aug 11 16:29:45 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src42.ximg exists
[Sat Aug 11 16:29:45 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src42_1.ximg exists
[Sat Aug 11 16:29:45 2012] Fit fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src42 appears to have run properly
[Sat Aug 11 16:29:46 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Sat Aug 11 16:29:46 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Sat Aug 11 16:29:46 2012] Fit fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Sat Aug 11 16:30:28 2012] Spatial fit model total counts = 116.889000, observed total counts = 115.000000
[Sat Aug 11 16:30:28 2012] Offset between fit and detection position for source 45 = 3.950505 pixels
[Sat Aug 11 16:30:28 2012] 116.265200 total counts/ 47.465600 bgd. counts: snr = 9.986112
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 3.950505 pixels
  Position = (274.4, 256.1) = 0 18 46.22 16 22 13.9
  Extent = 16.4 (16.4-16.4)", rotation angle = 0
  Source counts = 68.8 +/- 10.8
  Background counts = 47.5
  Rate = 0.002 +/- 0.0003
[Sat Aug 11 16:30:28 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 16:30:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 16:30:28 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 16:30:28 2012] Source does appear to be extended
[Sat Aug 11 16:30:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 19:27:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 11 19:27:45 2012] Initial guess for spatial extent in simple fitting = 16.43"
[Sat Aug 11 19:27:45 2012] source mask rpix=3.8, npix_max = 73, mask sum = 72, frac = 0.984
[Sat Aug 11 19:27:45 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 16.43"
[Sat Aug 11 21:10:32 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src38.ximg exists
[Sat Aug 11 21:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src38.csv
[Sat Aug 11 21:10:32 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src38_1.ximg exists
[Sat Aug 11 21:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src38.csv
[Sat Aug 11 21:10:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 21:10:33 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Sat Aug 11 21:10:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src38.csv
[Sat Aug 11 21:10:33 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Sat Aug 11 21:10:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src38.csv
[Sat Aug 11 21:10:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 21:11:12 2012] Warning, spatial fit 38 centroid is now closest to src. 6
[Sat Aug 11 21:11:12 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 21:11:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 21:11:12 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 21:11:12 2012] Source does appear to be extended
[Sat Aug 11 21:11:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 14:39:21 2012] XMMSAS src. selection expression = ellipse(23820.580000, 22234.185400, 985.962028, 985.962028, 0.000000, X, Y)
[Sun Aug 12 14:39:21 2012] Writing source region out to fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src45_src.reg
[Sun Aug 12 14:39:21 2012] Extracting stamp from image fullrun_mos2_xmm0111000101_pi300-10000_cl_sm2.00.img.gz, (218, 199) - (331, 313)
[Sun Aug 12 14:39:21 2012] XMMSAS bgd. selection expression = annulus(23820.580000, 22234.185400, 1643.270047, 3286.540095, X, Y) && !ellipse(27488.038808, 26990.341600, 1980.944057, 1980.944057, 0.000000, X, Y) && !ellipse(25187.582672, 20155.553436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28253.192000, 26049.880000, 1214.760035, 1214.760035, 0.000000, X, Y) && !ellipse(21996.599800, 18875.567800, 610.624018, 610.624018, 0.000000, X, Y) && !ellipse(26222.467957, 19685.083572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27824.663971, 25251.621979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26594.926086, 25727.682007, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 14:39:21 2012] Writing fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src45.gif
[Sun Aug 12 15:06:52 2012] Mean detx,y = (1815.10, -5769.57) 
[Sun Aug 12 15:06:54 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 15:07:19 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 15:07:20 2012] Setting source spectrum file to fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Sun Aug 12 15:07:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Sun Aug 12 15:40:45 2012] Not generating rmf since there are only 68 counts
[Sun Aug 12 15:40:45 2012] rmf not generated due to insufficient counts
[Sun Aug 12 15:42:24 2012] Updating aperture counts using extracted products
[Sun Aug 12 15:42:24 2012] Error reading totcts from fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Sun Aug 12 15:42:25 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 15:42:25 2012] Using photon index=1.80, rate=0.00218, arf fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src45.arf
[Sun Aug 12 15:42:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 15:42:25 2012] Updating source flux to 2.6e-14
[Sun Aug 12 15:44:08 2012] Source 45 has fewer than 100.000000 counts, skipping spectral fitting