[Sat Aug 11 10:28:20 2012] Detection parameters:
  Position = (299.9, 306.2) = 0 18 38.49 16 25 51.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.1 +/- 11.9
  Background counts = 11.5
  Rate = 0.002 +/- 0.0004

[Sat Aug 11 10:28:20 2012] Off-axis axis estimate = 0.57'
[Sat Aug 11 14:39:54 2012] Using EEF radius (= 6.72 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 14:39:54 2012] Initial guess for spatial extent in simple fitting = 6.72"
[Sat Aug 11 14:39:54 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.958
[Sat Aug 11 14:39:54 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 6.72"
[Sat Aug 11 16:29:45 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src25.ximg exists
[Sat Aug 11 16:29:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src25.csv
[Sat Aug 11 16:29:45 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src25_1.ximg exists
[Sat Aug 11 16:29:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src25.csv
[Sat Aug 11 16:29:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 16:29:46 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sat Aug 11 16:29:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sat Aug 11 16:29:46 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sat Aug 11 16:29:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sat Aug 11 16:29:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 16:30:28 2012] Spatial fit model total counts = 143.116000, observed total counts = 572.000000
[Sat Aug 11 16:30:28 2012] Poor agreement between spatial fit and data for source 39
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Aug 11 16:30:28 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 16:30:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 16:30:28 2012] Assessing source extent using major
[Sat Aug 11 16:30:28 2012] Source does appear to be extended
[Sat Aug 11 16:30:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 19:27:45 2012] Using EEF radius (= 6.72 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 19:27:45 2012] Initial guess for spatial extent in simple fitting = 6.72"
[Sat Aug 11 19:27:45 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.958
[Sat Aug 11 19:27:45 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 6.72"
[Sat Aug 11 21:10:32 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src25.ximg exists
[Sat Aug 11 21:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src25.csv
[Sat Aug 11 21:10:32 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src25_1.ximg exists
[Sat Aug 11 21:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src25.csv
[Sat Aug 11 21:10:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 21:10:33 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sat Aug 11 21:10:33 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sat Aug 11 21:10:33 2012] Fit fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sat Aug 11 21:11:12 2012] Source 39 is offset by -6.251506 and -6.941445 pixels which is larger than
2 X fitted extent = 5.223448 x 5.223448, not incorporating fit results
[Sat Aug 11 21:11:12 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 21:11:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 21:11:12 2012] Assessing source extent using major
[Sat Aug 11 21:11:12 2012] Source does appear to be extended
[Sat Aug 11 21:11:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 14:39:20 2012] XMMSAS src. selection expression = ellipse(26044.888977, 26592.754272, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 12 14:39:20 2012] Writing source region out to fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src39_src.reg
[Sun Aug 12 14:39:20 2012] Extracting stamp from image fullrun_mos2_xmm0111000101_pi300-10000_cl_sm2.00.img.gz, (262, 269) - (337, 344)
[Sun Aug 12 14:39:21 2012] XMMSAS bgd. selection expression = annulus(26044.888977, 26592.754272, 1087.500000, 2175.000000, X, Y) && !ellipse(27488.038808, 26990.341600, 1980.944057, 1980.944057, 0.000000, X, Y) && !ellipse(28253.192000, 26049.880000, 1214.760035, 1214.760035, 0.000000, X, Y) && !ellipse(27824.663971, 25251.621979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28653.938477, 25366.980347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25769.987244, 27450.705750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26594.926086, 25727.682007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27223.972000, 28298.904000, 1247.192036, 1247.192036, 0.000000, X, Y) && !ellipse(25919.518494, 28221.673157, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 14:39:21 2012] Writing fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src39.gif
[Sun Aug 12 15:01:21 2012] Mean detx,y = (1221.49, -882.02) 
[Sun Aug 12 15:01:23 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 15:01:36 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 15:01:37 2012] Setting source spectrum file to fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sun Aug 12 15:01:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Sun Aug 12 15:38:31 2012] Not generating rmf since there are only 67 counts
[Sun Aug 12 15:38:31 2012] rmf not generated due to insufficient counts
[Sun Aug 12 15:42:23 2012] Updating aperture counts using extracted products
[Sun Aug 12 15:42:23 2012] Error reading totcts from fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sun Aug 12 15:42:25 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 15:42:25 2012] Using photon index=1.80, rate=0.00217, arf fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src39.arf
[Sun Aug 12 15:42:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 15:42:25 2012] Updating source flux to 2.4e-14
[Sun Aug 12 15:44:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting