[Sat Aug 11 10:28:20 2012] Detection parameters:
  Position = (315.9, 331.8) = 0 18 33.65 16 27 44.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.5 +/- 10.4
  Background counts = 12.7
  Rate = 0.002 +/- 0.0004

[Sat Aug 11 10:28:20 2012] Off-axis axis estimate = 2.73'
[Sat Aug 11 14:39:54 2012] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 14:39:54 2012] Initial guess for spatial extent in simple fitting = 7.79"
[Sat Aug 11 14:39:54 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.761
[Sat Aug 11 14:39:54 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 7.79"
[Sat Aug 11 16:29:45 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src37.ximg exists
[Sat Aug 11 16:29:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src37.csv
[Sat Aug 11 16:29:45 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src37_1.ximg exists
[Sat Aug 11 16:29:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src37.csv
[Sat Aug 11 16:29:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 16:29:46 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Sat Aug 11 16:29:46 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Sat Aug 11 16:29:46 2012] Fit fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Sat Aug 11 16:30:28 2012] Spatial fit model total counts = 422.715000, observed total counts = 425.000000
[Sat Aug 11 16:30:28 2012] Offset between fit and detection position for source 34 = 6.475233 pixels
[Sat Aug 11 16:30:28 2012] 411.938500 total counts/ 319.680000 bgd. counts: snr = 5.159988
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 6.475233 pixels
  Position = (313.5, 325.8) = 0 18 34.39 16 27 17.2
  Extent = 15.6 (15.5-31.2)", rotation angle = 0
  Source counts = 92.3 +/- 20.3
  Background counts = 319.7
  Rate = 0.003 +/- 0.0006
[Sat Aug 11 16:30:28 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 16:30:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 16:30:28 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 16:30:28 2012] Source does appear to be extended
[Sat Aug 11 16:30:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 19:27:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 11 19:27:45 2012] Initial guess for spatial extent in simple fitting = 15.59"
[Sat Aug 11 19:27:45 2012] source mask rpix=3.6, npix_max = 66, mask sum = 72, frac = 1.079
[Sat Aug 11 19:27:45 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 15.59"
[Sat Aug 11 21:10:32 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src34.ximg exists
[Sat Aug 11 21:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src34.csv
[Sat Aug 11 21:10:32 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src34_1.ximg exists
[Sat Aug 11 21:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src34.csv
[Sat Aug 11 21:10:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 21:10:33 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Sat Aug 11 21:10:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src34.csv
[Sat Aug 11 21:10:33 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Sat Aug 11 21:10:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src34.csv
[Sat Aug 11 21:10:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 21:11:12 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 14.352100 pixels away
[Sat Aug 11 21:11:12 2012] Warning, spatial fit 34 centroid is now closest to src. 35
[Sat Aug 11 21:11:12 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 21:11:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 21:11:12 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 21:11:12 2012] Source does appear to be extended
[Sat Aug 11 21:11:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 21:11:12 2012] Source is confused with source 2
[Sun Aug 12 14:39:21 2012] XMMSAS src. selection expression = ellipse(27223.972000, 28298.904000, 935.394027, 935.394027, 0.000000, X, Y)
[Sun Aug 12 14:39:21 2012] Writing source region out to fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src34_src.reg
[Sun Aug 12 14:39:21 2012] Extracting stamp from image fullrun_mos2_xmm0111000101_pi300-10000_cl_sm2.00.img.gz, (260, 272) - (367, 380)
[Sun Aug 12 14:39:21 2012] XMMSAS bgd. selection expression = annulus(27223.972000, 28298.904000, 1558.990045, 3117.980090, X, Y) && !ellipse(27488.038808, 26990.341600, 1980.944057, 1980.944057, 0.000000, X, Y) && !ellipse(27972.364620, 30861.857000, 417.952012, 350.964810, 204.415825, X, Y) && !ellipse(28253.192000, 26049.880000, 1214.760035, 1214.760035, 0.000000, X, Y) && !ellipse(29357.736298, 26834.935425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27824.663971, 25251.621979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28653.938477, 25366.980347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26044.888977, 26592.754272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25769.987244, 27450.705750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26594.926086, 25727.682007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25919.518494, 28221.673157, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 14:39:21 2012] Writing fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src34.gif
[Sun Aug 12 15:05:22 2012] Mean detx,y = (713.82, 760.11) 
[Sun Aug 12 15:05:24 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 15:05:41 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 15:05:41 2012] Setting source spectrum file to fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sun Aug 12 15:05:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Sun Aug 12 15:39:52 2012] Not generating rmf since there are only 92 counts
[Sun Aug 12 15:39:52 2012] rmf not generated due to insufficient counts
[Sun Aug 12 15:42:24 2012] Updating aperture counts using extracted products
[Sun Aug 12 15:42:24 2012] Error reading totcts from fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sun Aug 12 15:42:25 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 15:42:25 2012] Using photon index=1.80, rate=0.00293, arf fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src34.arf
[Sun Aug 12 15:42:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 15:42:25 2012] Updating source flux to 2.8e-14
[Sun Aug 12 15:44:08 2012] Flag c found in src. 34 procflags, skipping spectral fitting
[Sun Aug 12 15:44:08 2012] Source 34 has fewer than 100.000000 counts, skipping spectral fitting