[Sat Aug 11 10:28:20 2012] Detection parameters:
  Position = (251.1, 333.7) = 0 18 53.27 16 27 51.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.9 +/- 11.7
  Background counts = 8.0
  Rate = 0.004 +/- 0.0005

[Sat Aug 11 10:28:20 2012] Off-axis axis estimate = 4.28'
[Sat Aug 11 14:39:54 2012] Using EEF radius (= 8.57 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 14:39:54 2012] Initial guess for spatial extent in simple fitting = 8.57"
[Sat Aug 11 14:39:54 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.024
[Sat Aug 11 14:39:54 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.57"
[Sat Aug 11 16:29:45 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src13.ximg exists
[Sat Aug 11 16:29:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src13.csv
[Sat Aug 11 16:29:45 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src13_1.ximg exists
[Sat Aug 11 16:29:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src13.csv
[Sat Aug 11 16:29:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 16:29:45 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sat Aug 11 16:29:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sat Aug 11 16:29:45 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sat Aug 11 16:29:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sat Aug 11 16:29:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 16:30:28 2012] Warning, spatial fit 13 centroid is now closest to src. 33
[Sat Aug 11 16:30:28 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 16:30:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 16:30:28 2012] Assessing source extent using major
[Sat Aug 11 16:30:28 2012] Source does appear to be extended
[Sat Aug 11 16:30:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 19:27:45 2012] Using EEF radius (= 8.57 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 19:27:45 2012] Initial guess for spatial extent in simple fitting = 8.57"
[Sat Aug 11 19:27:45 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.024
[Sat Aug 11 19:27:45 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 8.57"
[Sat Aug 11 21:10:32 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src13.ximg exists
[Sat Aug 11 21:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src13.csv
[Sat Aug 11 21:10:32 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src13_1.ximg exists
[Sat Aug 11 21:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src13.csv
[Sat Aug 11 21:10:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 21:10:33 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sat Aug 11 21:10:33 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Aug 11 21:10:33 2012] Fit fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Aug 11 21:11:12 2012] Spatial fit model total counts = 155.140000, observed total counts = 141.000000
[Sat Aug 11 21:11:12 2012] Poor agreement between spatial fit and data for source 24
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Aug 11 21:11:12 2012] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 26.733279 pixels away
[Sat Aug 11 21:11:12 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 21:11:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 21:11:12 2012] Assessing source extent using major
[Sat Aug 11 21:11:12 2012] Source does appear to be extended
[Sat Aug 11 21:11:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 14:39:20 2012] XMMSAS src. selection expression = ellipse(21792.883453, 28987.043762, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 12 14:39:20 2012] Writing source region out to fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src24_src.reg
[Sun Aug 12 14:39:20 2012] Extracting stamp from image fullrun_mos2_xmm0111000101_pi300-10000_cl_sm2.00.img.gz, (214, 296) - (289, 371)
[Sun Aug 12 14:39:20 2012] XMMSAS bgd. selection expression = annulus(21792.883453, 28987.043762, 1087.500000, 2175.000000, X, Y) && !ellipse(19973.890580, 27705.880000, 441.054413, 441.054413, 0.000000, X, Y) && !ellipse(22806.964200, 29111.909200, 352.874410, 352.874410, 0.000000, X, Y) && !ellipse(21256.241280, 31225.686800, 1499.768043, 571.292816, 17.399968, X, Y)
[Sun Aug 12 14:39:20 2012] Writing fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src24.gif
[Sun Aug 12 14:55:32 2012] Mean detx,y = (6101.41, -277.62) 
[Sun Aug 12 14:55:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 14:56:12 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 14:56:13 2012] Setting source spectrum file to fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sun Aug 12 14:56:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Sun Aug 12 15:36:26 2012] Not generating rmf since there are only 84 counts
[Sun Aug 12 15:36:26 2012] rmf not generated due to insufficient counts
[Sun Aug 12 15:42:22 2012] Updating aperture counts using extracted products
[Sun Aug 12 15:42:22 2012] Error reading totcts from fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sun Aug 12 15:42:25 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 15:42:25 2012] Using photon index=1.80, rate=0.00363, arf fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src24.arf
[Sun Aug 12 15:42:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 15:42:25 2012] Updating source flux to 5.2e-14
[Sun Aug 12 15:44:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting