[Sat Aug 11 10:28:19 2012] Detection parameters:
  Position = (316.1, 310.0) = 0 18 33.61 16 26 8.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1162.0 +/- 41.4
  Background counts = 12.7
  Rate = 0.04 +/- 0.001

[Sat Aug 11 10:28:20 2012] Off-axis axis estimate = 1.53'
[Sat Aug 11 14:39:54 2012] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 14:39:54 2012] Initial guess for spatial extent in simple fitting = 7.19"
[Sat Aug 11 14:39:54 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.862
[Sat Aug 11 14:39:54 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.19"
[Sat Aug 11 16:29:45 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Aug 11 16:29:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src1.csv
[Sat Aug 11 16:29:45 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Aug 11 16:29:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src1.csv
[Sat Aug 11 16:29:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 16:29:45 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Aug 11 16:29:45 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Aug 11 16:29:45 2012] Fit fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Aug 11 16:30:28 2012] Spatial fit model total counts = 3569.480000, observed total counts = 3515.000000
[Sat Aug 11 16:30:28 2012] Offset between fit and detection position for source 2 = 0.690342 pixels
[Sat Aug 11 16:30:28 2012] 3612.890000 total counts/ 2363.260000 bgd. counts: snr = 25.705478
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.690342 pixels
  Position = (316.7, 309.9) = 0 18 33.41 16 26 7.9
  Extent = 14.4 (14.3-28.8)", rotation angle = 0
  Source counts = 1249.6 +/- 60.1
  Background counts = 2363.3
  Rate = 0.04 +/- 0.002
[Sat Aug 11 16:30:28 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 16:30:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 16:30:28 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 16:30:28 2012] Source does appear to be extended
[Sat Aug 11 16:30:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 19:27:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 11 19:27:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug 11 19:27:45 2012] Initial guess for spatial extent in simple fitting = 14.39"
[Sat Aug 11 19:27:45 2012] source mask rpix=3.3, npix_max = 57, mask sum = 61, frac = 1.052
[Sat Aug 11 19:27:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.39"
[Sat Aug 11 21:10:32 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Aug 11 21:10:32 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Aug 11 21:10:32 2012] Fit fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Aug 11 21:10:32 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Aug 11 21:10:33 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Aug 11 21:10:33 2012] Fit fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Aug 11 21:11:12 2012] Spatial fit model total counts = 6258.020000, observed total counts = 5855.000000
[Sat Aug 11 21:11:12 2012] Offset between fit and detection position for source 2 = 0.908892 pixels
[Sat Aug 11 21:11:12 2012] 6285.130000 total counts/ 2495.970000 bgd. counts: snr = 75.844355
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.908892 pixels
  Position = (316.5, 310.8) = 0 18 33.47 16 26 11.7
  Extent = 24.8 (23.3-26.2)", rotation angle = 0
  Source counts = 3789.2 +/- 79.3
  Background counts = 2496.0
  Rate = 0.1 +/- 0.003
[Sat Aug 11 21:11:12 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 21:11:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 21:11:12 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 21:11:12 2012] Source does appear to be extended
[Sat Aug 11 21:11:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 21:11:12 2012] Source is confused with source 4
[Sat Aug 11 21:11:12 2012] Source is confused with source 34
[Sun Aug 12 14:39:19 2012] Counts = 3789.160000, rescaling region sizes by 2.000000
[Sun Aug 12 14:39:19 2012] XMMSAS src. selection expression = ellipse(27488.038808, 26990.341600, 2971.416086, 2971.416086, 0.000000, X, Y)
[Sun Aug 12 14:39:19 2012] Writing source region out to fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src2_src.reg
[Sun Aug 12 14:39:19 2012] Extracting stamp from image fullrun_mos2_xmm0111000101_pi300-10000_cl_sm2.00.img.gz, (146, 140) - (487, 482)
[Sun Aug 12 14:39:19 2012] XMMSAS bgd. selection expression = annulus(27488.038808, 26990.341600, 9904.720285, 19809.440570, X, Y) && !ellipse(27972.364620, 30861.857000, 417.952012, 350.964810, 204.415825, X, Y) && !ellipse(25187.582672, 20155.553436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40087.532745, 19369.764328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28253.192000, 26049.880000, 1214.760035, 1214.760035, 0.000000, X, Y) && !ellipse(21996.599800, 18875.567800, 610.624018, 610.624018, 0.000000, X, Y) && !ellipse(26222.467957, 19685.083572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19973.890580, 27705.880000, 441.054413, 441.054413, 0.000000, X, Y) && !ellipse(34236.626099, 34458.769745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28143.437408, 20398.395691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32285.176600, 16720.980000, 1560.112045, 1560.112045, 0.000000, X, Y) && !ellipse(30920.749320, 19179.577200, 309.916809, 309.916809, 0.000000, X, Y) && !ellipse(21792.883453, 28987.043762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22263.675368, 15143.500254, 497.084820, 223.689176, 33.489409, X, Y) && !ellipse(16476.664200, 18252.503600, 466.001613, 466.001613, 0.000000, X, Y) && !ellipse(32007.644000, 16707.256000, 1707.056049, 1707.056049, 0.000000, X, Y) && !ellipse(39095.518219, 17852.679260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29357.736298, 26834.935425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43016.008820, 23796.838501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26465.851837, 37274.707092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27587.859253, 33714.780090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27824.663971, 25251.621979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14420.813600, 19898.339000, 358.886410, 358.886410, 0.000000, X, Y) && !ellipse(28653.938477, 25366.980347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26044.888977, 26592.754272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25769.987244, 27450.705750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36475.386146, 15549.220299, 592.394298, 305.250017, 342.176717, X, Y) && !ellipse(22806.964200, 29111.909200, 352.874410, 352.874410, 0.000000, X, Y) && !ellipse(19444.842000, 15599.906000, 649.265619, 240.032807, 56.001094, X, Y) && !ellipse(21256.241280, 31225.686800, 1499.768043, 571.292816, 17.399968, X, Y) && !ellipse(26594.926086, 25727.682007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34383.319122, 26713.956360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27223.972000, 28298.904000, 1247.192036, 1247.192036, 0.000000, X, Y) && !ellipse(26343.793400, 41099.367000, 280.640808, 280.640808, 0.000000, X, Y) && !ellipse(25919.518494, 28221.673157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11861.494141, 21444.043137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23820.580000, 22234.185400, 1314.616038, 1314.616038, 0.000000, X, Y) && !ellipse(16552.607720, 15903.260800, 1051.424030, 414.983212, 122.564184, X, Y) && !ellipse(11887.257217, 33183.737061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26121.457367, 42538.982361, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 14:39:19 2012] Writing fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src2.gif
[Sun Aug 12 14:39:27 2012] Mean detx,y = (56.04, -46.81) 
[Sun Aug 12 14:39:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 14:50:41 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 14:50:42 2012] Setting source spectrum file to fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Aug 12 14:50:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Aug 12 15:42:22 2012] Updating aperture counts using extracted products
[Sun Aug 12 15:42:22 2012] Error reading totcts from fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Aug 12 15:42:24 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 15:42:24 2012] Using photon index=1.80, rate=0.12, arf fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src2.arf
[Sun Aug 12 15:42:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 15:42:24 2012] Updating source flux to 1e-12
[Sun Aug 12 15:44:08 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Sun Aug 12 15:45:07 2012] Reading fit data from xmm0111000101/analysis//spectral/fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src2_pl.csv
[Sun Aug 12 15:45:07 2012] Spectral fit parameter nH value = 8.09447e+20
[Sun Aug 12 15:45:07 2012] Spectral fit parameter PhoIndex value = 1.7904
[Sun Aug 12 15:45:07 2012] Failed to get F(0.3-8.0) from xmm0111000101/analysis//spectral/fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Aug 12 15:45:07 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 15:45:07 2012] Using Nh = 8.1e+20, photon index=1.79, rate=0.12, arf fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src2.arf
[Sun Aug 12 15:45:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 15:45:07 2012] Updating source flux to 1.1e-12