[Sat Aug 11 10:28:19 2012] Detection parameters:
  Position = (324.0, 235.0) = 0 18 31.20 16 20 42.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.0 +/- 14.7
  Background counts = 7.9
  Rate = 0.005 +/- 0.0006

[Sat Aug 11 10:28:20 2012] Off-axis axis estimate = 4.96'
[Sat Aug 11 14:39:54 2012] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 14:39:54 2012] Initial guess for spatial extent in simple fitting = 8.91"
[Sat Aug 11 14:39:54 2012] source mask rpix=2.0, npix_max = 25, mask sum = 36, frac = 1.387
[Sat Aug 11 14:39:54 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 8.91"
[Sat Aug 11 16:29:45 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src10.ximg exists
[Sat Aug 11 16:29:45 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat Aug 11 16:29:45 2012] Fit fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_src10 appears to have run properly
[Sat Aug 11 16:29:45 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat Aug 11 16:29:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Aug 11 16:29:45 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Aug 11 16:29:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Aug 11 16:29:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 16:30:28 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 10.880157 pixels away
[Sat Aug 11 16:30:28 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 16:30:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 16:30:28 2012] Assessing source extent using major
[Sat Aug 11 16:30:28 2012] Source does appear to be extended
[Sat Aug 11 16:30:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 19:27:45 2012] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 19:27:45 2012] Initial guess for spatial extent in simple fitting = 8.91"
[Sat Aug 11 19:27:45 2012] source mask rpix=2.0, npix_max = 25, mask sum = 36, frac = 1.387
[Sat Aug 11 19:27:45 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 8.91"
[Sat Aug 11 21:10:32 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src10.ximg exists
[Sat Aug 11 21:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src10.csv
[Sat Aug 11 21:10:32 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Aug 11 21:10:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src10.csv
[Sat Aug 11 21:10:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 21:10:33 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Aug 11 21:10:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat Aug 11 21:10:33 2012] fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Aug 11 21:10:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat Aug 11 21:10:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 21:11:12 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 12.325208 pixels away
[Sat Aug 11 21:11:12 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 52.744381 pixels away
[Sat Aug 11 21:11:12 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 21:11:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 21:11:12 2012] Assessing source extent using major
[Sat Aug 11 21:11:12 2012] Source does appear to be extended
[Sat Aug 11 21:11:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 14:39:20 2012] XMMSAS src. selection expression = ellipse(28143.437408, 20398.395691, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 12 14:39:20 2012] Writing source region out to fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src15_src.reg
[Sun Aug 12 14:39:20 2012] Extracting stamp from image fullrun_mos2_xmm0111000101_pi300-10000_cl_sm2.00.img.gz, (287, 198) - (362, 273)
[Sun Aug 12 14:39:20 2012] XMMSAS bgd. selection expression = annulus(28143.437408, 20398.395691, 1087.500000, 2175.000000, X, Y) && !ellipse(25187.582672, 20155.553436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26222.467957, 19685.083572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32007.644000, 16707.256000, 1707.056049, 1707.056049, 0.000000, X, Y)
[Sun Aug 12 14:39:20 2012] Writing fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src15.gif
[Sun Aug 12 14:53:51 2012] Mean detx,y = (-2874.81, -5927.69) 
[Sun Aug 12 14:53:55 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 14:54:13 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 14:54:13 2012] Setting source spectrum file to fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun Aug 12 14:54:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sun Aug 12 15:32:12 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Aug 12 15:32:12 2012] rmf not generated due to insufficient counts
[Sun Aug 12 15:42:22 2012] Updating aperture counts using extracted products
[Sun Aug 12 15:42:22 2012] Error reading totcts from fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun Aug 12 15:42:24 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 15:42:24 2012] Using photon index=1.80, rate=0.00532, arf fullrun_mos2_xmm0111000101_pi300-10000_pass1_cl_src15.arf
[Sun Aug 12 15:42:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 15:42:24 2012] Updating source flux to 6.8e-14
[Sun Aug 12 15:44:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting