[Sat Aug 11 10:27:35 2012] Detection parameters:
  Position = (316.0, 295.2) = 0 18 33.63 16 25 4.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 158.1 +/- 17.2
  Background counts = 13.9
  Rate = 0.005 +/- 0.0006

[Sat Aug 11 10:27:37 2012] Off-axis axis estimate = 1.29'
[Sat Aug 11 13:13:07 2012] Using EEF radius (= 7.08 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 13:13:07 2012] Initial guess for spatial extent in simple fitting = 7.08"
[Sat Aug 11 13:13:07 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.884
[Sat Aug 11 13:13:07 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.08"
[Sat Aug 11 14:39:53 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src11.ximg exists
[Sat Aug 11 14:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src11.csv
[Sat Aug 11 14:39:53 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Aug 11 14:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src11.csv
[Sat Aug 11 14:39:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 14:39:54 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Aug 11 14:39:54 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Aug 11 14:39:54 2012] Fit fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Aug 11 16:30:18 2012] Source 6 is offset by -4.205927 and -7.330549 pixels which is larger than
2 X fitted extent = 6.506575 x 6.506575, not incorporating fit results
[Sat Aug 11 16:30:18 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 16:30:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 16:30:18 2012] Assessing source extent using major
[Sat Aug 11 16:30:18 2012] Source does appear to be extended
[Sat Aug 11 16:30:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 18:09:45 2012] Using EEF radius (= 7.08 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 18:09:45 2012] Initial guess for spatial extent in simple fitting = 7.08"
[Sat Aug 11 18:09:45 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.884
[Sat Aug 11 18:09:45 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 7.08"
[Sat Aug 11 19:27:43 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src11.ximg exists
[Sat Aug 11 19:27:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src11.csv
[Sat Aug 11 19:27:43 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Aug 11 19:27:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src11.csv
[Sat Aug 11 19:27:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 19:27:44 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Aug 11 19:27:44 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Aug 11 19:27:44 2012] Fit fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Aug 11 21:11:01 2012] Spatial fit model total counts = 981.384000, observed total counts = 993.000000
[Sat Aug 11 21:11:01 2012] Offset between fit and detection position for source 6 = 4.509809 pixels
[Sat Aug 11 21:11:01 2012] 1041.944000 total counts/ 913.547000 bgd. counts: snr = 4.248048
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 4.509809 pixels
  Position = (313.7, 291.3) = 0 18 34.34 16 24 47.0
  Extent = 14.2 (11.4-28.3)", rotation angle = 0
  Source counts = 128.4 +/- 32.3
  Background counts = 913.5
  Rate = 0.004 +/- 0.001
[Sat Aug 11 21:11:01 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 21:11:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 21:11:01 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 21:11:01 2012] Source does appear to be extended
[Sat Aug 11 21:11:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 21:11:01 2012] Source is confused with source 4
[Sun Aug 12 11:35:02 2012] XMMSAS src. selection expression = ellipse(27240.344000, 25295.830000, 849.108024, 849.108024, 0.000000, X, Y)
[Sun Aug 12 11:35:02 2012] Writing source region out to fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src6_src.reg
[Sun Aug 12 11:35:02 2012] Extracting stamp from image fullrun_mos1_xmm0111000101_pi300-10000_cl_sm2.00.img.gz, (265, 243) - (362, 340)
[Sun Aug 12 11:35:02 2012] XMMSAS bgd. selection expression = annulus(27240.344000, 25295.830000, 1415.180041, 2830.360081, X, Y) && !ellipse(27527.994600, 26998.498000, 2169.296062, 2169.296062, 0.000000, X, Y) && !ellipse(27572.852000, 26971.846000, 2279.920066, 1936.848056, 218.746000, X, Y) && !ellipse(29242.412445, 26664.455994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29268.545898, 25970.096802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24232.324371, 26360.425934, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 11:35:02 2012] Writing fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src6.gif
[Sun Aug 12 12:09:57 2012] Mean detx,y = (-1291.31, 80.78) 
[Sun Aug 12 12:10:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 12:10:16 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 12:10:17 2012] Setting source spectrum file to fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Aug 12 12:10:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Aug 12 15:42:18 2012] Updating aperture counts using extracted products
[Sun Aug 12 15:42:18 2012] Error reading totcts from fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Aug 12 15:42:20 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 15:42:20 2012] Using photon index=1.80, rate=0.00407, arf fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src6.arf
[Sun Aug 12 15:42:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 15:42:20 2012] Updating source flux to 3.9e-14
[Sun Aug 12 15:42:28 2012] Flag b found in src. 6 procflags, skipping spectral fitting
[Sun Aug 12 15:42:28 2012] Flag c found in src. 6 procflags, skipping spectral fitting