[Sat Aug 11 10:27:36 2012] Detection parameters:
  Position = (262.5, 335.1) = 0 18 49.80 16 27 58.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.5 +/- 11.6
  Background counts = 9.3
  Rate = 0.003 +/- 0.0005

[Sat Aug 11 10:27:37 2012] Off-axis axis estimate = 3.72'
[Sat Aug 11 13:13:08 2012] Using EEF radius (= 8.29 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 13:13:08 2012] Initial guess for spatial extent in simple fitting = 8.29"
[Sat Aug 11 13:13:08 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.864
[Sat Aug 11 13:13:08 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 8.29"
[Sat Aug 11 14:39:53 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src17.ximg exists
[Sat Aug 11 14:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src17.csv
[Sat Aug 11 14:39:53 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src17_1.ximg exists
[Sat Aug 11 14:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src17.csv
[Sat Aug 11 14:39:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 14:39:54 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sat Aug 11 14:39:54 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sat Aug 11 14:39:54 2012] Fit fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sat Aug 11 16:30:18 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 11.101414 pixels away
[Sat Aug 11 16:30:18 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 16:30:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 16:30:18 2012] Assessing source extent using major
[Sat Aug 11 16:30:18 2012] Source does appear to be extended
[Sat Aug 11 16:30:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 18:09:45 2012] Using EEF radius (= 8.29 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 18:09:45 2012] Initial guess for spatial extent in simple fitting = 8.29"
[Sat Aug 11 18:09:45 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.864
[Sat Aug 11 18:09:45 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 8.29"
[Sat Aug 11 19:27:44 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src17.ximg exists
[Sat Aug 11 19:27:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src17.csv
[Sat Aug 11 19:27:44 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src17_1.ximg exists
[Sat Aug 11 19:27:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src17.csv
[Sat Aug 11 19:27:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 19:27:44 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sat Aug 11 19:27:44 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sat Aug 11 19:27:44 2012] Fit fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sat Aug 11 21:11:01 2012] Source 32 is offset by 2.922112 and -4.965032 pixels which is larger than
2 X fitted extent = 1.083320 x 1.083320, not incorporating fit results
[Sat Aug 11 21:11:01 2012] Spatial fit model total counts = 166.918000, observed total counts = 167.000000
[Sat Aug 11 21:11:01 2012] Offset between fit and detection position for source 32 = 0.080953 pixels
[Sat Aug 11 21:11:01 2012] 166.783000 total counts/ 122.084000 bgd. counts: snr = 4.045465
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.080953 pixels
  Position = (262.5, 335.1) = 0 18 49.82 16 27 57.6
  Extent = 3.7 (3.0-5.2)", rotation angle = 0
  Source counts = 44.7 +/- 12.9
  Background counts = 122.1
  Rate = 0.001 +/- 0.0004
[Sat Aug 11 21:11:01 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 21:11:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 21:11:01 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 21:11:01 2012] Source does appear to be extended
[Sat Aug 11 21:11:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 11:35:02 2012] XMMSAS src. selection expression = ellipse(22786.745800, 29108.511000, 223.609206, 223.609206, 0.000000, X, Y)
[Sun Aug 12 11:35:02 2012] Writing source region out to fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src32_src.reg
[Sun Aug 12 11:35:02 2012] Extracting stamp from image fullrun_mos1_xmm0111000101_pi300-10000_cl_sm2.00.img.gz, (250, 322) - (275, 348)
[Sun Aug 12 11:35:02 2012] XMMSAS bgd. selection expression = annulus(22786.745800, 29108.511000, 372.682011, 745.364021, X, Y) && !ellipse(21784.018311, 28935.759216, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 11:35:02 2012] Writing fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src32.gif
[Sun Aug 12 12:13:37 2012] Mean detx,y = (422.35, -5435.33) 
[Sun Aug 12 12:13:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 12:13:54 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 12:13:55 2012] Setting source spectrum file to fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sun Aug 12 12:13:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Sun Aug 12 14:36:18 2012] Not generating rmf since there are only 44 counts
[Sun Aug 12 14:36:19 2012] rmf not generated due to insufficient counts
[Sun Aug 12 15:42:19 2012] Updating aperture counts using extracted products
[Sun Aug 12 15:42:19 2012] Error reading totcts from fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sun Aug 12 15:42:21 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 15:42:21 2012] Using photon index=1.80, rate=0.00142, arf fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src32.arf
[Sun Aug 12 15:42:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 15:42:21 2012] Updating source flux to 3e-14
[Sun Aug 12 15:42:28 2012] Flag b found in src. 32 procflags, skipping spectral fitting
[Sun Aug 12 15:42:28 2012] Source 32 has fewer than 100.000000 counts, skipping spectral fitting