[Sat Aug 11 10:27:35 2012] Detection parameters:
  Position = (317.2, 310.0) = 0 18 33.27 16 26 7.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1181.4 +/- 42.7
  Background counts = 15.1
  Rate = 0.04 +/- 0.001

[Sat Aug 11 10:27:37 2012] Off-axis axis estimate = 1.60'
[Sat Aug 11 13:13:07 2012] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 13:13:07 2012] Initial guess for spatial extent in simple fitting = 7.23"
[Sat Aug 11 13:13:07 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.856
[Sat Aug 11 13:13:07 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.23"
[Sat Aug 11 14:39:53 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Aug 11 14:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src1.csv
[Sat Aug 11 14:39:53 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Aug 11 14:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src1.csv
[Sat Aug 11 14:39:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 14:39:54 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Aug 11 14:39:54 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Aug 11 14:39:54 2012] Fit fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Aug 11 16:30:17 2012] Spatial fit model total counts = 3566.000000, observed total counts = 3566.000000
[Sat Aug 11 16:30:17 2012] Offset between fit and detection position for source 3 = 0.521774 pixels
[Sat Aug 11 16:30:17 2012] 3584.330000 total counts/ 2477.560000 bgd. counts: snr = 22.235417
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.521774 pixels
  Position = (316.8, 310.4) = 0 18 33.38 16 26 9.8
  Extent = 14.5 (14.4-28.9)", rotation angle = 0
  Source counts = 1106.8 +/- 59.9
  Background counts = 2477.6
  Rate = 0.04 +/- 0.002
[Sat Aug 11 16:30:18 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 16:30:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 16:30:18 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 16:30:18 2012] Source does appear to be extended
[Sat Aug 11 16:30:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 16:30:18 2012] Source is confused with source 4
[Sat Aug 11 18:09:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 11 18:09:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Aug 11 18:09:45 2012] Initial guess for spatial extent in simple fitting = 14.45"
[Sat Aug 11 18:09:45 2012] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.958
[Sat Aug 11 18:09:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.45"
[Sat Aug 11 19:27:43 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Aug 11 19:27:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src1.csv
[Sat Aug 11 19:27:43 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Aug 11 19:27:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src1.csv
[Sat Aug 11 19:27:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 19:27:44 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Aug 11 19:27:44 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Aug 11 19:27:44 2012] Fit fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Aug 11 21:11:01 2012] Spatial fit model total counts = 6101.910000, observed total counts = 6102.000000
[Sat Aug 11 21:11:01 2012] Offset between fit and detection position for source 3 = 0.546850 pixels
[Sat Aug 11 21:11:01 2012] 6109.300000 total counts/ 1793.420000 bgd. counts: snr = 101.912711
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.546850 pixels
  Position = (317.0, 310.9) = 0 18 33.34 16 26 12.1
  Extent = 27.1 (25.4-28.9)", rotation angle = 0
  Source counts = 4315.9 +/- 78.2
  Background counts = 1793.4
  Rate = 0.1 +/- 0.002
[Sat Aug 11 21:11:01 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 21:11:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 21:11:01 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 21:11:01 2012] Source does appear to be extended
[Sat Aug 11 21:11:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 11:35:02 2012] Counts = 4315.880000, rescaling region sizes by 2.000000
[Sun Aug 12 11:35:02 2012] XMMSAS src. selection expression = ellipse(27527.994600, 26998.498000, 3253.944094, 3253.944094, 0.000000, X, Y)
[Sun Aug 12 11:35:02 2012] Writing source region out to fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src3_src.reg
[Sun Aug 12 11:35:02 2012] Extracting stamp from image fullrun_mos1_xmm0111000101_pi300-10000_cl_sm2.00.img.gz, (130, 124) - (504, 498)
[Sun Aug 12 11:35:02 2012] XMMSAS bgd. selection expression = annulus(27527.994600, 26998.498000, 10846.480312, 21692.960624, X, Y) && !ellipse(25165.777400, 20199.889200, 501.110414, 422.820012, 21.065200, X, Y) && !ellipse(40108.502200, 19387.356000, 653.740819, 653.740819, 0.000000, X, Y) && !ellipse(27962.478577, 30602.987518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22011.871600, 18912.196000, 635.696018, 635.696018, 0.000000, X, Y) && !ellipse(26181.604401, 19658.071304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28164.106812, 20291.840073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27572.852000, 26971.846000, 2279.920066, 1936.848056, 218.746000, X, Y) && !ellipse(19982.158783, 27712.725281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27240.344000, 25295.830000, 1132.144033, 1132.144033, 0.000000, X, Y) && !ellipse(26469.254520, 37272.081800, 493.269614, 493.269614, 0.000000, X, Y) && !ellipse(30888.490784, 19146.398041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34222.323240, 34461.768600, 547.519216, 547.519216, 0.000000, X, Y) && !ellipse(21784.018311, 28935.759216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20834.351501, 20826.812546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22786.745800, 29108.511000, 298.145609, 298.145609, 0.000000, X, Y) && !ellipse(29242.412445, 26664.455994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39100.562775, 17879.238846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28988.966003, 36688.250946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19429.242294, 15618.972580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16498.687000, 18211.301000, 468.585613, 468.585613, 0.000000, X, Y) && !ellipse(28985.976600, 29139.745400, 417.774412, 267.070408, 89.827000, X, Y) && !ellipse(31894.237122, 17079.601105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36425.790800, 15602.474000, 425.592012, 425.592012, 0.000000, X, Y) && !ellipse(41487.709200, 19431.471200, 509.123215, 509.123215, 0.000000, X, Y) && !ellipse(24080.403595, 36029.158508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14390.550262, 19860.700485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29268.545898, 25970.096802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22248.834290, 15185.118225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34542.878418, 26171.847168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34906.824524, 33171.393829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43005.688721, 23788.676941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26458.476166, 41086.484863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36907.221832, 39243.342285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24232.324371, 26360.425934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22771.808685, 13652.801254, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 11:35:02 2012] Writing fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src3.gif
[Sun Aug 12 11:35:09 2012] Mean detx,y = (195.87, -159.19) 
[Sun Aug 12 11:35:12 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 11:50:46 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 11:50:46 2012] Setting source spectrum file to fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Aug 12 11:50:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Aug 12 15:42:18 2012] Updating aperture counts using extracted products
[Sun Aug 12 15:42:18 2012] Error reading totcts from fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Aug 12 15:42:20 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 15:42:20 2012] Using photon index=1.80, rate=0.137, arf fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src3.arf
[Sun Aug 12 15:42:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 15:42:20 2012] Updating source flux to 1.2e-12
[Sun Aug 12 15:42:28 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Sun Aug 12 15:44:08 2012] Reading fit data from xmm0111000101/analysis//spectral/fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src3_pl.csv
[Sun Aug 12 15:44:08 2012] Spectral fit parameter nH value = 7.68953e+20
[Sun Aug 12 15:44:08 2012] Spectral fit parameter PhoIndex value = 1.7556
[Sun Aug 12 15:44:08 2012] Failed to get F(0.3-8.0) from xmm0111000101/analysis//spectral/fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sun Aug 12 15:44:08 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 15:44:08 2012] Using Nh = 7.7e+20, photon index=1.76, rate=0.137, arf fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src3.arf
[Sun Aug 12 15:44:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 15:44:08 2012] Updating source flux to 1.3e-12