[Sat Aug 11 10:27:36 2012] Detection parameters:
  Position = (333.8, 422.3) = 0 18 28.25 16 34 17.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.0 +/- 8.9
  Background counts = 5.7
  Rate = 0.003 +/- 0.0006

[Sat Aug 11 10:27:37 2012] Off-axis axis estimate = 9.34'
[Sat Aug 11 13:13:08 2012] Using EEF radius (= 11.10 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 13:13:08 2012] Initial guess for spatial extent in simple fitting = 11.10"
[Sat Aug 11 13:13:08 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.967
[Sat Aug 11 13:13:08 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 11.10"
[Sat Aug 11 14:39:53 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src20.ximg exists
[Sat Aug 11 14:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src20.csv
[Sat Aug 11 14:39:53 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src20_1.ximg exists
[Sat Aug 11 14:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src20.csv
[Sat Aug 11 14:39:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 14:39:54 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sat Aug 11 14:39:54 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sat Aug 11 14:39:54 2012] Fit fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Sat Aug 11 16:30:18 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 12.191194 pixels away
[Sat Aug 11 16:30:18 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 16:30:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 16:30:18 2012] Assessing source extent using major
[Sat Aug 11 16:30:18 2012] Source does appear to be extended
[Sat Aug 11 16:30:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 18:09:45 2012] Using EEF radius (= 11.10 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 18:09:45 2012] Initial guess for spatial extent in simple fitting = 11.10"
[Sat Aug 11 18:09:45 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.967
[Sat Aug 11 18:09:45 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 11.10"
[Sat Aug 11 19:27:44 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src20.ximg exists
[Sat Aug 11 19:27:44 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src20_1.ximg exists
[Sat Aug 11 19:27:44 2012] Fit fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src20 appears to have run properly
[Sat Aug 11 19:27:44 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sat Aug 11 19:27:44 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sat Aug 11 19:27:44 2012] Fit fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sat Aug 11 21:11:01 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 15.123215 pixels away
[Sat Aug 11 21:11:01 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 21:11:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 21:11:01 2012] Assessing source extent using major
[Sat Aug 11 21:11:01 2012] Source does appear to be extended
[Sat Aug 11 21:11:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 11:35:02 2012] XMMSAS src. selection expression = ellipse(28988.966003, 36688.250946, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 12 11:35:02 2012] Writing source region out to fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src28_src.reg
[Sun Aug 12 11:35:02 2012] Extracting stamp from image fullrun_mos1_xmm0111000101_pi300-10000_cl_sm2.00.img.gz, (296, 385) - (371, 460)
[Sun Aug 12 11:35:02 2012] XMMSAS bgd. selection expression = annulus(28988.966003, 36688.250946, 1087.500000, 2175.000000, X, Y) && !ellipse(26469.254520, 37272.081800, 493.269614, 493.269614, 0.000000, X, Y)
[Sun Aug 12 11:35:02 2012] Writing fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src28.gif
[Sun Aug 12 12:14:42 2012] Mean detx,y = (9718.79, -2373.52) 
[Sun Aug 12 12:14:44 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 12:15:01 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 12:15:01 2012] Setting source spectrum file to fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sun Aug 12 12:15:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sun Aug 12 14:36:43 2012] Not generating rmf since there are only 46 counts
[Sun Aug 12 14:36:43 2012] rmf not generated due to insufficient counts
[Sun Aug 12 15:42:19 2012] Updating aperture counts using extracted products
[Sun Aug 12 15:42:19 2012] Error reading totcts from fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sun Aug 12 15:42:21 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 15:42:21 2012] Using photon index=1.80, rate=0.00285, arf fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src28.arf
[Sun Aug 12 15:42:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 15:42:21 2012] Updating source flux to 5.1e-14
[Sun Aug 12 15:42:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting