[Sat Aug 11 10:27:36 2012] Detection parameters:
  Position = (137.2, 381.9) = 0 19 27.72 16 31 20.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.6 +/- 7.6
  Background counts = 5.1
  Rate = 0.001 +/- 0.0002

[Sat Aug 11 10:27:37 2012] Off-axis axis estimate = 13.17'
[Sat Aug 11 13:13:08 2012] Using EEF radius (= 13.01 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 13:13:08 2012] Initial guess for spatial extent in simple fitting = 13.01"
[Sat Aug 11 13:13:08 2012] source mask rpix=3.0, npix_max = 48, mask sum = 41, frac = 0.841
[Sat Aug 11 13:13:08 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 13.01"
[Sat Aug 11 14:39:53 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src42.ximg exists
[Sat Aug 11 14:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src42.csv
[Sat Aug 11 14:39:53 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src42_1.ximg exists
[Sat Aug 11 14:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src42.csv
[Sat Aug 11 14:39:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 14:39:54 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Sat Aug 11 14:39:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src42.csv
[Sat Aug 11 14:39:54 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Sat Aug 11 14:39:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src42.csv
[Sat Aug 11 14:39:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 16:30:18 2012] Spatial fit model total counts = 103.094000, observed total counts = 69.000000
[Sat Aug 11 16:30:18 2012] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Aug 11 16:30:18 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 16:30:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 16:30:18 2012] Assessing source extent using major
[Sat Aug 11 16:30:18 2012] Source does appear to be extended
[Sat Aug 11 16:30:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 16:30:18 2012] Deleting source due to low Poisson probability 0.9