[Sat Aug 11 10:27:35 2012] Detection parameters:
  Position = (277.3, 414.7) = 0 18 45.32 16 33 44.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.5 +/- 10.7
  Background counts = 6.1
  Rate = 0.002 +/- 0.0003

[Sat Aug 11 10:27:37 2012] Off-axis axis estimate = 8.57'
[Sat Aug 11 13:13:08 2012] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 13:13:08 2012] Initial guess for spatial extent in simple fitting = 10.71"
[Sat Aug 11 13:13:08 2012] source mask rpix=2.5, npix_max = 35, mask sum = 19, frac = 0.541
[Sat Aug 11 13:13:08 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 10.71"
[Sat Aug 11 14:39:53 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src28.ximg exists
[Sat Aug 11 14:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src28.csv
[Sat Aug 11 14:39:53 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src28_1.ximg exists
[Sat Aug 11 14:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src28.csv
[Sat Aug 11 14:39:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 14:39:54 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sat Aug 11 14:39:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sat Aug 11 14:39:54 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sat Aug 11 14:39:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sat Aug 11 14:39:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 16:30:18 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 15.117347 pixels away
[Sat Aug 11 16:30:18 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 16:30:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 16:30:18 2012] Assessing source extent using major
[Sat Aug 11 16:30:18 2012] Source does appear to be extended
[Sat Aug 11 16:30:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 18:09:45 2012] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 18:09:45 2012] Initial guess for spatial extent in simple fitting = 10.71"
[Sat Aug 11 18:09:45 2012] source mask rpix=2.5, npix_max = 35, mask sum = 19, frac = 0.541
[Sat Aug 11 18:09:45 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 10.71"
[Sat Aug 11 19:27:44 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src27.ximg exists
[Sat Aug 11 19:27:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src27.csv
[Sat Aug 11 19:27:44 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src27_1.ximg exists
[Sat Aug 11 19:27:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src27.csv
[Sat Aug 11 19:27:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 19:27:44 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sat Aug 11 19:27:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sat Aug 11 19:27:44 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sat Aug 11 19:27:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sat Aug 11 19:27:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 21:11:01 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 16.600520 pixels away
[Sat Aug 11 21:11:01 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 21:11:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 21:11:01 2012] Assessing source extent using major
[Sat Aug 11 21:11:01 2012] Source does appear to be extended
[Sat Aug 11 21:11:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 11:35:02 2012] XMMSAS src. selection expression = ellipse(24080.403595, 36029.158508, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 12 11:35:02 2012] Writing source region out to fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src19_src.reg
[Sun Aug 12 11:35:02 2012] Extracting stamp from image fullrun_mos1_xmm0111000101_pi300-10000_cl_sm2.00.img.gz, (240, 377) - (315, 452)
[Sun Aug 12 11:35:02 2012] XMMSAS bgd. selection expression = annulus(24080.403595, 36029.158508, 1087.500000, 2175.000000, X, Y) && !ellipse(26469.254520, 37272.081800, 493.269614, 493.269614, 0.000000, X, Y)
[Sun Aug 12 11:35:02 2012] Writing fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src19.gif
[Sun Aug 12 12:17:45 2012] Mean detx,y = (7353.72, -6713.78) 
[Sun Aug 12 12:17:47 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 12:18:27 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 12:18:27 2012] Setting source spectrum file to fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun Aug 12 12:18:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sun Aug 12 14:37:35 2012] Not generating rmf since there are only 72 counts
[Sun Aug 12 14:37:35 2012] rmf not generated due to insufficient counts
[Sun Aug 12 15:42:19 2012] Updating aperture counts using extracted products
[Sun Aug 12 15:42:19 2012] Error reading totcts from fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sun Aug 12 15:42:21 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 15:42:21 2012] Using photon index=1.80, rate=0.0023, arf fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src19.arf
[Sun Aug 12 15:42:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 15:42:21 2012] Updating source flux to 5.6e-14
[Sun Aug 12 15:42:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting