[Sat Aug 11 10:27:35 2012] Detection parameters:
  Position = (322.0, 352.3) = 0 18 31.82 16 29 22.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 242.4 +/- 29.4
  Background counts = 12.0
  Rate = 0.01 +/- 0.001

[Sat Aug 11 10:27:37 2012] Off-axis axis estimate = 4.26'
[Sat Aug 11 13:13:07 2012] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 13:13:07 2012] Initial guess for spatial extent in simple fitting = 8.56"
[Sat Aug 11 13:13:07 2012] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.780
[Sat Aug 11 13:13:07 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 8.56"
[Sat Aug 11 14:39:53 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src4.ximg exists
[Sat Aug 11 14:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src4.csv
[Sat Aug 11 14:39:53 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat Aug 11 14:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src4.csv
[Sat Aug 11 14:39:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 14:39:54 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat Aug 11 14:39:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Aug 11 14:39:54 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Aug 11 14:39:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Aug 11 14:39:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 16:30:18 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 11.648695 pixels away
[Sat Aug 11 16:30:18 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 16:30:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 16:30:18 2012] Assessing source extent using major
[Sat Aug 11 16:30:18 2012] Source does appear to be extended
[Sat Aug 11 16:30:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 18:09:45 2012] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 18:09:45 2012] Initial guess for spatial extent in simple fitting = 8.56"
[Sat Aug 11 18:09:45 2012] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.780
[Sat Aug 11 18:09:45 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 8.56"
[Sat Aug 11 19:27:43 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src4.ximg exists
[Sat Aug 11 19:27:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src4.csv
[Sat Aug 11 19:27:43 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat Aug 11 19:27:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src4.csv
[Sat Aug 11 19:27:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 19:27:44 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat Aug 11 19:27:44 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Aug 11 19:27:44 2012] Fit fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sat Aug 11 21:11:01 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 10.162003 pixels away
[Sat Aug 11 21:11:01 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 21:11:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 21:11:01 2012] Assessing source extent using major
[Sat Aug 11 21:11:01 2012] Source does appear to be extended
[Sat Aug 11 21:11:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 11:35:02 2012] XMMSAS src. selection expression = ellipse(27962.478577, 30602.987518, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 12 11:35:02 2012] Writing source region out to fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src18_src.reg
[Sun Aug 12 11:35:02 2012] Extracting stamp from image fullrun_mos1_xmm0111000101_pi300-10000_cl_sm2.00.img.gz, (284, 315) - (359, 390)
[Sun Aug 12 11:35:02 2012] XMMSAS bgd. selection expression = annulus(27962.478577, 30602.987518, 1087.500000, 2175.000000, X, Y) && !ellipse(27527.994600, 26998.498000, 2169.296062, 2169.296062, 0.000000, X, Y) && !ellipse(27572.852000, 26971.846000, 2279.920066, 1936.848056, 218.746000, X, Y) && !ellipse(28985.976600, 29139.745400, 417.774412, 267.070408, 89.827000, X, Y)
[Sun Aug 12 11:35:02 2012] Writing fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src18.gif
[Sun Aug 12 11:51:42 2012] Mean detx,y = (3889.58, -1228.50) 
[Sun Aug 12 11:51:44 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 11:52:04 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 11:52:05 2012] Setting source spectrum file to fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sun Aug 12 11:52:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sun Aug 12 14:15:30 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Aug 12 14:15:30 2012] rmf not generated due to insufficient counts
[Sun Aug 12 15:42:18 2012] Updating aperture counts using extracted products
[Sun Aug 12 15:42:18 2012] Error reading totcts from fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sun Aug 12 15:42:20 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 15:42:20 2012] Using photon index=1.80, rate=0.012, arf fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src18.arf
[Sun Aug 12 15:42:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 15:42:20 2012] Updating source flux to 1.4e-13
[Sun Aug 12 15:42:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting