[Sat Aug 11 10:27:35 2012] Detection parameters:
  Position = (253.4, 217.9) = 0 18 52.56 16 19 25.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 140.2 +/- 15.2
  Background counts = 6.9
  Rate = 0.008 +/- 0.0008

[Sat Aug 11 10:27:37 2012] Off-axis axis estimate = 6.69'
[Sat Aug 11 13:13:07 2012] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 13:13:07 2012] Initial guess for spatial extent in simple fitting = 9.77"
[Sat Aug 11 13:13:07 2012] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.994
[Sat Aug 11 13:13:07 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.77"
[Sat Aug 11 14:39:53 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src5.ximg exists
[Sat Aug 11 14:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src5.csv
[Sat Aug 11 14:39:53 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Aug 11 14:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src5.csv
[Sat Aug 11 14:39:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 14:39:54 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Aug 11 14:39:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Aug 11 14:39:54 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Aug 11 14:39:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Aug 11 14:39:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 16:30:18 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 13.294168 pixels away
[Sat Aug 11 16:30:18 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 16:30:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 16:30:18 2012] Assessing source extent using major
[Sat Aug 11 16:30:18 2012] Source does appear to be extended
[Sat Aug 11 16:30:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 18:09:45 2012] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 18:09:45 2012] Initial guess for spatial extent in simple fitting = 9.77"
[Sat Aug 11 18:09:45 2012] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.994
[Sat Aug 11 18:09:45 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 9.77"
[Sat Aug 11 19:27:43 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src5.ximg exists
[Sat Aug 11 19:27:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src5.csv
[Sat Aug 11 19:27:43 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Aug 11 19:27:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src5.csv
[Sat Aug 11 19:27:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 19:27:44 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Aug 11 19:27:44 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Aug 11 19:27:44 2012] Fit fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Aug 11 21:11:01 2012] Spatial fit model total counts = 205.398000, observed total counts = 199.000000
[Sat Aug 11 21:11:01 2012] Offset between fit and detection position for source 14 = 0.220605 pixels
[Sat Aug 11 21:11:01 2012] 202.864600 total counts/ 75.254600 bgd. counts: snr = 14.710187
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.220605 pixels
  Position = (253.6, 217.9) = 0 18 52.50 16 19 27.8
  Extent = 7.9 (6.9-9.4)", rotation angle = 0
  Source counts = 127.6 +/- 14.2
  Background counts = 75.3
  Rate = 0.004 +/- 0.0005
[Sat Aug 11 21:11:01 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 21:11:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 21:11:01 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 21:11:01 2012] Source does appear to be extended
[Sat Aug 11 21:11:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 12 11:35:02 2012] XMMSAS src. selection expression = ellipse(22011.871600, 18912.196000, 476.772014, 476.772014, 0.000000, X, Y)
[Sun Aug 12 11:35:02 2012] Writing source region out to fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src14_src.reg
[Sun Aug 12 11:35:02 2012] Extracting stamp from image fullrun_mos1_xmm0111000101_pi300-10000_cl_sm2.00.img.gz, (226, 191) - (281, 245)
[Sun Aug 12 11:35:02 2012] XMMSAS bgd. selection expression = annulus(22011.871600, 18912.196000, 794.620023, 1589.240046, X, Y) && !ellipse(20834.351501, 20826.812546, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 11:35:02 2012] Writing fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src14.gif
[Sun Aug 12 11:52:10 2012] Mean detx,y = (-9360.63, -2446.69) 
[Sun Aug 12 11:52:12 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 11:52:25 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 11:52:25 2012] Setting source spectrum file to fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sun Aug 12 11:52:25 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sun Aug 12 15:42:18 2012] Updating aperture counts using extracted products
[Sun Aug 12 15:42:18 2012] Error reading totcts from fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sun Aug 12 15:42:20 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 15:42:20 2012] Using photon index=1.80, rate=0.00405, arf fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src14.arf
[Sun Aug 12 15:42:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 15:42:20 2012] Updating source flux to 7.6e-14