[Sat Aug 11 10:27:35 2012] Detection parameters:
  Position = (289.8, 232.9) = 0 18 41.54 16 20 32.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 496.0 +/- 26.8
  Background counts = 7.9
  Rate = 0.02 +/- 0.001

[Sat Aug 11 10:27:37 2012] Off-axis axis estimate = 4.80'
[Sat Aug 11 13:13:07 2012] Using EEF radius (= 8.83 ")to estimate initial spatial extent for simple fitting
[Sat Aug 11 13:13:07 2012] Initial guess for spatial extent in simple fitting = 8.83"
[Sat Aug 11 13:13:07 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.977
[Sat Aug 11 13:13:07 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.83"
[Sat Aug 11 14:39:53 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src2.ximg exists
[Sat Aug 11 14:39:53 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Aug 11 14:39:53 2012] Fit fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_src2 appears to have run properly
[Sat Aug 11 14:39:54 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Aug 11 14:39:54 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Aug 11 14:39:54 2012] Fit fullrun_mos1_xmm0111000101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Aug 11 16:30:18 2012] Spatial fit model total counts = 524.715000, observed total counts = 507.000000
[Sat Aug 11 16:30:18 2012] Offset between fit and detection position for source 1 = 0.110096 pixels
[Sat Aug 11 16:30:18 2012] 531.764000 total counts/ 170.207000 bgd. counts: snr = 27.713289
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.110096 pixels
  Position = (289.8, 232.7) = 0 18 41.54 16 20 32.2
  Extent = 6.3 (5.6-7.1)" x 5.3 (4.8-5.9)", rotation angle = 21 (355-49) degrees
  Source counts = 361.6 +/- 23.1
  Background counts = 170.2
  Rate = 0.01 +/- 0.0007
[Sat Aug 11 16:30:18 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 16:30:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 16:30:18 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 16:30:18 2012] Source does appear to be extended
[Sat Aug 11 16:30:18 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.95
[Sat Aug 11 18:09:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 11 18:09:45 2012] Initial guess for spatial extent in simple fitting = 5.77"
[Sat Aug 11 18:09:45 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.198
[Sat Aug 11 18:09:45 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.77"
[Sat Aug 11 19:27:43 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src2.ximg exists
[Sat Aug 11 19:27:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src2.csv
[Sat Aug 11 19:27:43 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Aug 11 19:27:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src2.csv
[Sat Aug 11 19:27:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 19:27:44 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Aug 11 19:27:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Aug 11 19:27:44 2012] fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Aug 11 19:27:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Aug 11 19:27:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111000101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 21:11:01 2012] Warning, spatial fit 2 centroid is now closest to src. 12
[Sat Aug 11 21:11:01 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 21:11:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 21:11:01 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 21:11:01 2012] Source does appear to be extended
[Sat Aug 11 21:11:01 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.95
[Sun Aug 12 11:35:02 2012] XMMSAS src. selection expression = ellipse(25165.777400, 20199.889200, 375.832811, 317.115009, 21.065200, X, Y)
[Sun Aug 12 11:35:02 2012] Writing source region out to fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src1_src.reg
[Sun Aug 12 11:35:02 2012] Extracting stamp from image fullrun_mos1_xmm0111000101_pi300-10000_cl_sm2.00.img.gz, (268, 211) - (311, 254)
[Sun Aug 12 11:35:02 2012] XMMSAS bgd. selection expression = annulus(25165.777400, 20199.889200, 626.388018, 1252.776036, X, Y) && !ellipse(26181.604401, 19658.071304, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 12 11:35:02 2012] Writing fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src1.gif
[Sun Aug 12 11:50:52 2012] Mean detx,y = (-7001.45, 24.01) 
[Sun Aug 12 11:50:54 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 12 11:51:13 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 12 11:51:13 2012] Setting source spectrum file to fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug 12 11:51:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Aug 12 15:42:18 2012] Updating aperture counts using extracted products
[Sun Aug 12 15:42:18 2012] Error reading totcts from fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug 12 15:42:20 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 12 15:42:20 2012] Using photon index=1.80, rate=0.0115, arf fullrun_mos1_xmm0111000101_pi300-10000_pass1_cl_src1.arf
[Sun Aug 12 15:42:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 12 15:42:20 2012] Updating source flux to 1.7e-13