[Tue Mar 13 10:54:47 2012] Detection parameters:
  Position = (379.7, 349.9) = 12 26 56.47 1 31 24.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 364.0 +/- 24.6
  Background counts = 66.0
  Rate = 0.02 +/- 0.001

[Tue Mar 13 10:54:48 2012] Off-axis axis estimate = 6.97'
[Tue Mar 13 10:55:15 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:55:15 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Tue Mar 13 10:55:15 2012] source mask rpix=2.3, npix_max = 30, mask sum = 23, frac = 0.744
[Tue Mar 13 10:55:15 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.92"
[Tue Mar 13 10:55:16 2012] fullrun_mos1_xmm0110990201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar 13 10:55:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110990201_pi300-10000_cl_pass0_src1.csv
[Tue Mar 13 10:55:16 2012] fullrun_mos1_xmm0110990201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar 13 10:55:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110990201_pi300-10000_cl_pass0_src1.csv
[Tue Mar 13 10:55:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110990201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110990201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:55:16 2012] fullrun_mos1_xmm0110990201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar 13 10:55:16 2012] fullrun_mos1_xmm0110990201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar 13 10:55:16 2012] Fit fullrun_mos1_xmm0110990201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar 13 10:55:29 2012] Spatial fit model total counts = 302.000000, observed total counts = 302.000000
[Tue Mar 13 10:55:29 2012] Offset between fit and detection position for source 1 = 0.104590 pixels
[Tue Mar 13 10:55:29 2012] 305.529000 total counts/ 164.276000 bgd. counts: snr = 11.020737
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.104590 pixels
  Position = (379.7, 349.8) = 12 26 56.47 1 31 25.6
  Extent = 5.5 (4.6-6.6)", rotation angle = 0
  Source counts = 141.3 +/- 17.5
  Background counts = 164.3
  Rate = 0.009 +/- 0.001
[Tue Mar 13 10:55:29 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:55:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:55:29 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:55:29 2012] Source does appear to be extended
[Tue Mar 13 10:55:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:55:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:55:46 2012] Initial guess for spatial extent in simple fitting = 5.47"
[Tue Mar 13 10:55:46 2012] source mask rpix=1.3, npix_max = 12, mask sum = 8, frac = 0.648
[Tue Mar 13 10:55:46 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.47"
[Tue Mar 13 10:55:46 2012] fullrun_mos1_xmm0110990201_pi300-10000_cl_pass1_src1.ximg exists
[Tue Mar 13 10:55:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110990201_pi300-10000_cl_pass1_src1.csv
[Tue Mar 13 10:55:46 2012] fullrun_mos1_xmm0110990201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Mar 13 10:55:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110990201_pi300-10000_cl_pass1_src1.csv
[Tue Mar 13 10:55:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110990201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110990201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:55:46 2012] fullrun_mos1_xmm0110990201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar 13 10:55:46 2012] fullrun_mos1_xmm0110990201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar 13 10:55:46 2012] Fit fullrun_mos1_xmm0110990201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Mar 13 10:55:57 2012] Warning, spatial fit 1 centroid is now closest to src. 7
[Tue Mar 13 10:55:57 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:55:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:55:57 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:55:57 2012] Source does appear to be extended
[Tue Mar 13 10:55:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:56:17 2012] XMMSAS src. selection expression = ellipse(32984.647900, 30386.503800, 328.090809, 328.090809, 0.000000, X, Y)
[Tue Mar 13 10:56:17 2012] Not overwriting source region fullrun_mos1_xmm0110990201_pi300-10000_pass1_cl_src1_src.reg
[Tue Mar 13 10:56:17 2012] Extracting stamp from image fullrun_mos1_xmm0110990201_pi300-10000_cl_sm2.00.img.gz, (361, 331) - (399, 369)
[Tue Mar 13 10:56:17 2012] XMMSAS bgd. selection expression = annulus(32984.647900, 30386.503800, 546.818016, 1093.636031, X, Y)
[Tue Mar 13 10:56:17 2012] Writing fullrun_mos1_xmm0110990201_pi300-10000_pass1_cl_src1.gif
[Tue Mar 13 10:56:17 2012] ../../xmm0110990201/products/events/fullrun_mos1_xmm0110990201_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0110990201/products/events/fullrun_mos1_xmm0110990201_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Mar 13 10:56:17 2012] Mean detx,y = (-397.51, 6925.59) 
[Tue Mar 13 10:56:17 2012] ../../xmm0110990201/products/images/fullrun_mos1_xmm0110990201_pi300-10000_pass1_cl_src1_src.img and ../../xmm0110990201/products/images/fullrun_mos1_xmm0110990201_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Mar 13 10:56:17 2012] ../../xmm0110990201/products/spectra/fullrun_mos1_xmm0110990201_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0110990201/products/spectra/fullrun_mos1_xmm0110990201_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Mar 13 10:56:17 2012] Setting source spectrum file to fullrun_mos1_xmm0110990201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Mar 13 10:56:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110990201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Mar 13 10:56:17 2012] ../../xmm0110990201/products/lightcurves/fullrun_mos1_xmm0110990201_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0110990201/products/lightcurves/fullrun_mos1_xmm0110990201_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Mar 13 10:56:21 2012] fullrun_mos1_xmm0110990201_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Tue Mar 13 10:56:21 2012] fullrun_mos1_xmm0110990201_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Tue Mar 13 10:57:07 2012] Updating aperture counts using extracted products
[Tue Mar 13 10:57:07 2012] Error reading totcts from fullrun_mos1_xmm0110990201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Mar 13 10:57:07 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 10:57:07 2012] Using photon index=1.80, rate=0.00912, arf fullrun_mos1_xmm0110990201_pi300-10000_pass1_cl_src1.arf
[Tue Mar 13 10:57:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 10:57:07 2012] Updating source flux to 1.5e-13
[Tue Mar 13 10:57:13 2012] Reading fit data from xmm0110990201/analysis//spectral/fullrun_mos1_xmm0110990201_pi300-10000_pass1_cl_src1_pl.csv
[Tue Mar 13 10:57:13 2012] Spectral fit parameter nH value = 4.792e+21
[Tue Mar 13 10:57:13 2012] Spectral fit parameter PhoIndex value = 1.31916
[Tue Mar 13 10:57:13 2012] Failed to get F(0.3-8.0) from xmm0110990201/analysis//spectral/fullrun_mos1_xmm0110990201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Mar 13 10:57:13 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 10:57:13 2012] Using Nh = 4.8e+21, photon index=1.32, rate=0.00912, arf fullrun_mos1_xmm0110990201_pi300-10000_pass1_cl_src1.arf
[Tue Mar 13 10:57:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 10:57:14 2012] Updating source flux to 2.6e-13