[Wed May 16 10:25:54 2012] Detection parameters: Position = (274.0, 187.9) = 2 38 51.01 16 27 54.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 101.3 +/- 13.8 Background counts = 12.7 Rate = 0.006 +/- 0.0008 [Wed May 16 10:25:54 2012] Off-axis axis estimate = 8.21' [Wed May 16 10:30:18 2012] Using EEF radius (= 10.53 ")to estimate initial spatial extent for simple fitting [Wed May 16 10:30:18 2012] Initial guess for spatial extent in simple fitting = 10.53" [Wed May 16 10:30:18 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.055 [Wed May 16 10:30:18 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 10.53" [Wed May 16 15:30:47 2012] fullrun_pn_xmm0110990101_pi300-10000_cl_pass0_src51.ximg exists [Wed May 16 15:30:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110990101_pi300-10000_cl_pass0_src51.csv [Wed May 16 15:30:47 2012] fullrun_pn_xmm0110990101_pi300-10000_cl_pass0_src51_1.ximg exists [Wed May 16 15:30:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110990101_pi300-10000_cl_pass0_src51.csv [Wed May 16 15:30:47 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110990101_pi300-10000_cl_pass0_src51_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110990101_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 16 15:30:48 2012] fullrun_pn_xmm0110990101_pi300-10000_cl_pass0_tfrozen_src51.ximg exists [Wed May 16 15:30:48 2012] fullrun_pn_xmm0110990101_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists [Wed May 16 15:30:48 2012] Fit fullrun_pn_xmm0110990101_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly [Wed May 16 17:56:22 2012] Spatial fit model total counts = 390.836000, observed total counts = 389.000000 [Wed May 16 17:56:22 2012] Offset between fit and detection position for source 51 = 5.480581 pixels [Wed May 16 17:56:22 2012] 338.175300 total counts/ 18.266300 bgd. counts: snr = 74.851613 Spatial fit parameters: Offset between fit and detection position for source 51 = 5.480581 pixels Position = (275.9, 193.0) = 2 38 50.43 16 28 17.3 Extent = 19.7 (17.9-21.1)", rotation angle = 0 Source counts = 319.9 +/- 18.4 Background counts = 18.3 Rate = 0.02 +/- 0.001 [Wed May 16 17:56:22 2012] Vigneting correction estimate = 1.000000 [Wed May 16 17:56:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 16 17:56:22 2012] Assessing source extent using major axis lower bound [Wed May 16 17:56:22 2012] Source does appear to be extended [Wed May 16 17:56:22 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 16 17:56:22 2012] Source is confused with source 46 [Wed May 16 17:56:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Wed May 16 17:56:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed May 16 17:56:54 2012] Initial guess for spatial extent in simple fitting = 19.70" [Wed May 16 17:56:54 2012] source mask rpix=4.5, npix_max = 101, mask sum = 100, frac = 0.988 [Wed May 16 17:56:54 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 19.70" [Wed May 16 21:41:12 2012] fullrun_pn_xmm0110990101_pi300-10000_cl_pass1_src40.ximg exists [Wed May 16 21:41:12 2012] fullrun_pn_xmm0110990101_pi300-10000_cl_pass1_src40_1.ximg exists [Wed May 16 21:41:12 2012] Fit fullrun_pn_xmm0110990101_pi300-10000_cl_pass1_src40 appears to have run properly [Wed May 16 21:41:13 2012] fullrun_pn_xmm0110990101_pi300-10000_cl_pass1_tfrozen_src40.ximg exists [Wed May 16 21:41:13 2012] fullrun_pn_xmm0110990101_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists [Wed May 16 21:41:13 2012] Fit fullrun_pn_xmm0110990101_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly [Wed May 16 22:53:28 2012] Spatial fit model total counts = 796.502000, observed total counts = 807.000000 [Wed May 16 22:53:28 2012] Offset between fit and detection position for source 51 = 1.058851 pixels [Wed May 16 22:53:28 2012] 793.579000 total counts/ 460.947000 bgd. counts: snr = 15.493107 Spatial fit parameters: Offset between fit and detection position for source 51 = 1.058851 pixels Position = (275.8, 194.1) = 2 38 50.47 16 28 21.8 Extent = 29.0" x 6.0", rotation angle = 108 Source counts = 332.6 +/- 28.2 Background counts = 460.9 Rate = 0.02 +/- 0.002 [Wed May 16 22:53:28 2012] Vigneting correction estimate = 1.000000 [Wed May 16 22:53:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 16 22:53:28 2012] Assessing source extent using major [Wed May 16 22:53:28 2012] Source does appear to be extended [Wed May 16 22:53:28 2012] Computing asymmetry using major and minor axis, asym = 4.81 [Wed May 16 22:53:28 2012] Source is asymmetric [Wed May 16 22:53:53 2012] XMMSAS src. selection expression = ellipse(23946.679514, 16834.295618, 1740.648050, 362.009271, 107.610098, X, Y) [Wed May 16 22:53:53 2012] Writing source region out to fullrun_pn_xmm0110990101_pi300-10000_pass1_cl_src51_src.reg [Wed May 16 22:53:53 2012] Extracting stamp from image fullrun_pn_xmm0110990101_pi300-10000_cl_sm2.00.img.gz, (176, 94) - (376, 294) [Wed May 16 22:53:53 2012] XMMSAS bgd. selection expression = annulus(23946.679514, 16834.295618, 2901.080083, 5802.160167, X, Y) && !ellipse(24701.931000, 18956.082800, 657.104019, 657.104019, 0.000000, X, Y) && !ellipse(25511.371400, 13745.894000, 338.744010, 338.744010, 0.000000, X, Y) && !ellipse(25904.182980, 22890.619000, 2489.680072, 480.784014, 108.593000, X, Y) && !ellipse(25923.465600, 22944.462000, 1210.928035, 429.844012, 107.758000, X, Y) && !ellipse(25579.453800, 21847.162400, 1310.816038, 414.636812, 108.329000, X, Y) && !ellipse(25129.820328, 20541.404176, 949.144027, 388.677439, 107.914888, X, Y) && !ellipse(24980.791200, 20067.356800, 949.144027, 348.048010, 107.848600, X, Y) && !ellipse(24370.424000, 17895.398000, 1089.408031, 1089.408031, 0.000000, X, Y) && !ellipse(24221.368000, 17659.436000, 1129.040032, 1129.040032, 0.000000, X, Y) && !ellipse(24015.207328, 17039.357658, 1895.120055, 425.747044, 107.127903, X, Y) && !ellipse(17860.108032, 15714.318665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23480.564000, 15385.216000, 944.752027, 944.752027, 0.000000, X, Y) && !ellipse(23362.624600, 15018.564000, 1322.480038, 465.362413, 90.000000, X, Y) && !ellipse(23236.700000, 14598.592000, 541.578416, 541.578416, 0.000000, X, Y) && !ellipse(23046.549600, 14020.919000, 1860.688054, 438.615213, 108.489900, X, Y) [Wed May 16 22:53:53 2012] Writing fullrun_pn_xmm0110990101_pi300-10000_pass1_cl_src51.gif [Wed May 16 23:47:13 2012] Mean detx,y = (-147.52, 10732.02) [Wed May 16 23:47:19 2012] Setting backscal keywords in source and bgd. spectrum [Wed May 16 23:50:16 2012] Binned source spectrum to 10 counts/bin [Wed May 16 23:50:16 2012] Setting source spectrum file to fullrun_pn_xmm0110990101_pi300-10000_pass1_cl_src51_src_b10.pi.gz [Wed May 16 23:50:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110990101_pi300-10000_pass1_cl_src51_bgd.pi.gz [Thu May 17 02:20:13 2012] Updating aperture counts using extracted products [Thu May 17 02:20:13 2012] Error reading totcts from fullrun_pn_xmm0110990101_pi300-10000_pass1_cl_src51_src_b10.pi.gz [Thu May 17 02:20:16 2012] Calculating source flux in energy range 0.30-8.00 [Thu May 17 02:20:16 2012] Using photon index=1.80, rate=0.0198, arf fullrun_pn_xmm0110990101_pi300-10000_pass1_cl_src51.arf [Thu May 17 02:20:16 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 17 02:20:16 2012] Updating source flux to 9.1e-14 [Thu May 17 02:21:46 2012] Flag c found in src. 51 procflags, skipping spectral fitting