[Wed May 16 10:27:34 2012] Detection parameters:
  Position = (427.9, 287.3) = 2 38 4.47 16 35 6.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.5 +/- 10.4
  Background counts = 4.4
  Rate = 0.007 +/- 0.0009

[Wed May 16 10:27:35 2012] Off-axis axis estimate = 9.42'
[Wed May 16 16:57:35 2012] Using EEF radius (= 11.14 ")to estimate initial spatial extent for simple fitting
[Wed May 16 16:57:35 2012] Initial guess for spatial extent in simple fitting = 11.14"
[Wed May 16 16:57:35 2012] source mask rpix=2.6, npix_max = 37, mask sum = 29, frac = 0.774
[Wed May 16 16:57:35 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.14"
[Wed May 16 17:56:04 2012] fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_src5.ximg exists
[Wed May 16 17:56:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_src5.csv
[Wed May 16 17:56:04 2012] fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed May 16 17:56:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_src5.csv
[Wed May 16 17:56:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 17:56:05 2012] fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed May 16 17:56:05 2012] fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed May 16 17:56:05 2012] Fit fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed May 16 17:56:39 2012] Spatial fit model total counts = 102.851000, observed total counts = 96.000000
[Wed May 16 17:56:39 2012] Offset between fit and detection position for source 4 = 0.352654 pixels
[Wed May 16 17:56:39 2012] 102.248300 total counts/ 45.626000 bgd. counts: snr = 8.382650
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.352654 pixels
  Position = (427.5, 287.4) = 2 38 4.57 16 35 7.8
  Extent = 5.6 (4.3-7.0)", rotation angle = 0
  Source counts = 56.6 +/- 10.1
  Background counts = 45.6
  Rate = 0.003 +/- 0.0005
[Wed May 16 17:56:39 2012] Vigneting correction estimate = 1.000000
[Wed May 16 17:56:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 17:56:39 2012] Assessing source extent using major axis lower bound
[Wed May 16 17:56:39 2012] Source does appear to be extended
[Wed May 16 17:56:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 22:15:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 16 22:15:45 2012] Initial guess for spatial extent in simple fitting = 5.56"
[Wed May 16 22:15:45 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.712
[Wed May 16 22:15:45 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 5.56"
[Wed May 16 22:53:12 2012] fullrun_mos2_xmm0110990101_pi300-10000_cl_pass1_src5.ximg exists
[Wed May 16 22:53:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110990101_pi300-10000_cl_pass1_src5.csv
[Wed May 16 22:53:12 2012] fullrun_mos2_xmm0110990101_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed May 16 22:53:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110990101_pi300-10000_cl_pass1_src5.csv
[Wed May 16 22:53:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110990101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110990101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 22:53:12 2012] fullrun_mos2_xmm0110990101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed May 16 22:53:12 2012] fullrun_mos2_xmm0110990101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed May 16 22:53:12 2012] Fit fullrun_mos2_xmm0110990101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed May 16 22:53:36 2012] Spatial fit model total counts = 97.249000, observed total counts = 93.000000
[Wed May 16 22:53:36 2012] Offset between fit and detection position for source 4 = 0.011653 pixels
[Wed May 16 22:53:36 2012] 96.837800 total counts/ 38.823200 bgd. counts: snr = 9.310899
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.011653 pixels
  Position = (427.5, 287.4) = 2 38 4.57 16 35 7.8
  Extent = 5.7 (4.4-7.2)", rotation angle = 0
  Source counts = 58.0 +/- 9.8
  Background counts = 38.8
  Rate = 0.003 +/- 0.0005
[Wed May 16 22:53:37 2012] Vigneting correction estimate = 1.000000
[Wed May 16 22:53:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 22:53:37 2012] Assessing source extent using major axis lower bound
[Wed May 16 22:53:37 2012] Source does appear to be extended
[Wed May 16 22:53:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 17 01:59:42 2012] XMMSAS src. selection expression = ellipse(37145.287400, 24958.074800, 339.754116, 339.754116, 0.000000, X, Y)
[Thu May 17 01:59:42 2012] Writing source region out to fullrun_mos2_xmm0110990101_pi300-10000_pass1_cl_src4_src.reg
[Thu May 17 01:59:42 2012] Extracting stamp from image fullrun_mos2_xmm0110990101_pi300-10000_cl_sm2.00.img.gz, (408, 268) - (447, 307)
[Thu May 17 01:59:42 2012] XMMSAS bgd. selection expression = annulus(37145.287400, 24958.074800, 566.256859, 1132.513719, X, Y) && !ellipse(39100.360992, 26768.023376, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 17 01:59:42 2012] Writing fullrun_mos2_xmm0110990101_pi300-10000_pass1_cl_src4.gif
[Thu May 17 02:07:52 2012] Mean detx,y = (-9775.03, 989.53) 
[Thu May 17 02:07:55 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 17 02:08:10 2012] Binned source spectrum to 10 counts/bin
[Thu May 17 02:08:11 2012] Setting source spectrum file to fullrun_mos2_xmm0110990101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu May 17 02:08:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110990101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu May 17 02:19:03 2012] Not generating rmf since there are only 58 counts
[Thu May 17 02:19:03 2012] rmf not generated due to insufficient counts
[Thu May 17 02:20:17 2012] Updating aperture counts using extracted products
[Thu May 17 02:20:17 2012] Error reading totcts from fullrun_mos2_xmm0110990101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu May 17 02:20:17 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 17 02:20:17 2012] Using photon index=1.80, rate=0.00305, arf fullrun_mos2_xmm0110990101_pi300-10000_pass1_cl_src4.arf
[Thu May 17 02:20:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 17 02:20:18 2012] Updating source flux to 6.2e-14
[Thu May 17 02:21:02 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting