[Wed May 16 10:27:35 2012] Detection parameters:
  Position = (319.9, 290.9) = 2 38 37.12 16 35 28.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29.9 +/- 8.7
  Background counts = 8.0
  Rate = 0.002 +/- 0.0005

[Wed May 16 10:27:35 2012] Off-axis axis estimate = 1.65'
[Wed May 16 16:57:35 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Wed May 16 16:57:35 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Wed May 16 16:57:35 2012] source mask rpix=1.7, npix_max = 18, mask sum = 10, frac = 0.532
[Wed May 16 16:57:35 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 7.25"
[Wed May 16 17:56:05 2012] fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_src18.ximg exists
[Wed May 16 17:56:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_src18.csv
[Wed May 16 17:56:05 2012] fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed May 16 17:56:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_src18.csv
[Wed May 16 17:56:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 17:56:05 2012] fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed May 16 17:56:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed May 16 17:56:05 2012] fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed May 16 17:56:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed May 16 17:56:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 17:56:39 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 10.179257 pixels away
[Wed May 16 17:56:39 2012] Vigneting correction estimate = 1.000000
[Wed May 16 17:56:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 17:56:39 2012] Assessing source extent using major
[Wed May 16 17:56:39 2012] Source does appear to be extended
[Wed May 16 17:56:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 17:56:39 2012] Deleting source due to low Poisson probability 0.9