[Wed May 16 10:27:34 2012] Detection parameters:
  Position = (428.9, 170.4) = 2 38 4.19 16 26 36.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24.7 +/- 6.2
  Background counts = 3.3
  Rate = 0.001 +/- 0.0003

[Wed May 16 10:27:35 2012] Off-axis axis estimate = 13.25'
[Wed May 16 16:57:35 2012] Using EEF radius (= 13.05 ")to estimate initial spatial extent for simple fitting
[Wed May 16 16:57:35 2012] Initial guess for spatial extent in simple fitting = 13.05"
[Wed May 16 16:57:35 2012] source mask rpix=3.0, npix_max = 49, mask sum = 43, frac = 0.877
[Wed May 16 16:57:35 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 13.05"
[Wed May 16 17:56:05 2012] fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_src20.ximg exists
[Wed May 16 17:56:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_src20.csv
[Wed May 16 17:56:05 2012] fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_src20_1.ximg exists
[Wed May 16 17:56:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_src20.csv
[Wed May 16 17:56:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 17:56:05 2012] fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Wed May 16 17:56:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Wed May 16 17:56:05 2012] fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Wed May 16 17:56:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Wed May 16 17:56:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110990101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 16 17:56:39 2012] Spatial fit model total counts = 61.665300, observed total counts = 51.000000
[Wed May 16 17:56:39 2012] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 16 17:56:39 2012] Vigneting correction estimate = 1.000000
[Wed May 16 17:56:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 16 17:56:39 2012] Assessing source extent using major
[Wed May 16 17:56:39 2012] Source does appear to be extended
[Wed May 16 17:56:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 16 17:56:39 2012] Deleting source due to low Poisson probability 0.9