[Tue Mar 13 11:04:55 2012] Detection parameters:
  Position = (294.6, 333.5) = 5 7 45.00 -37 30 4.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.4 +/- 11.3
  Background counts = 35.8
  Rate = 0.002 +/- 0.0005

[Tue Mar 13 11:04:57 2012] Off-axis axis estimate = 2.56'
[Tue Mar 13 11:06:07 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:06:07 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Tue Mar 13 11:06:07 2012] source mask rpix=1.8, npix_max = 20, mask sum = 21, frac = 1.017
[Tue Mar 13 11:06:07 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 7.71"
[Tue Mar 13 11:06:09 2012] fullrun_pn_xmm0110980801_pi300-10000_cl_pass0_src49.ximg exists
[Tue Mar 13 11:06:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110980801_pi300-10000_cl_pass0_src49.csv
[Tue Mar 13 11:06:09 2012] fullrun_pn_xmm0110980801_pi300-10000_cl_pass0_src49_1.ximg exists
[Tue Mar 13 11:06:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110980801_pi300-10000_cl_pass0_src49.csv
[Tue Mar 13 11:06:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110980801_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110980801_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:06:10 2012] fullrun_pn_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Tue Mar 13 11:06:10 2012] fullrun_pn_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Tue Mar 13 11:06:10 2012] Fit fullrun_pn_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Tue Mar 13 11:06:42 2012] Source 49 is offset by -5.438367 and 6.574216 pixels which is larger than
2 X fitted extent = 3.218212 x 3.218212, not incorporating fit results
[Tue Mar 13 11:06:42 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:06:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:06:42 2012] Assessing source extent using major
[Tue Mar 13 11:06:42 2012] Source does appear to be extended
[Tue Mar 13 11:06:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:07:47 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:07:47 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Tue Mar 13 11:07:47 2012] source mask rpix=1.8, npix_max = 20, mask sum = 21, frac = 1.017
[Tue Mar 13 11:07:47 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 7.71"
[Tue Mar 13 11:07:56 2012] fullrun_pn_xmm0110980801_pi300-10000_cl_pass1_src48.ximg exists
[Tue Mar 13 11:07:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110980801_pi300-10000_cl_pass1_src48.csv
[Tue Mar 13 11:07:56 2012] fullrun_pn_xmm0110980801_pi300-10000_cl_pass1_src48_1.ximg exists
[Tue Mar 13 11:07:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110980801_pi300-10000_cl_pass1_src48.csv
[Tue Mar 13 11:07:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110980801_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110980801_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:08:05 2012] fullrun_pn_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Tue Mar 13 11:08:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src48.csv
[Tue Mar 13 11:08:05 2012] fullrun_pn_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Tue Mar 13 11:08:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src48.csv
[Tue Mar 13 11:08:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:08:44 2012] Source 49 is offset by -5.829057 and 6.574216 pixels which is larger than
2 X fitted extent = 2.438979 x 2.438979, not incorporating fit results
[Tue Mar 13 11:08:44 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:08:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:08:44 2012] Assessing source extent using major
[Tue Mar 13 11:08:44 2012] Source does appear to be extended
[Tue Mar 13 11:08:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:09:45 2012] XMMSAS src. selection expression = ellipse(25579.680054, 28964.908783, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 13 11:09:45 2012] Not overwriting source region fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src49_src.reg
[Tue Mar 13 11:09:45 2012] Extracting stamp from image fullrun_pn_xmm0110980801_pi300-10000_cl_sm2.00.img.gz, (257, 296) - (332, 371)
[Tue Mar 13 11:09:45 2012] XMMSAS bgd. selection expression = annulus(25579.680054, 28964.908783, 1087.500000, 2175.000000, X, Y) && !ellipse(26176.439000, 27986.264600, 2054.203259, 1731.199250, 311.538000, X, Y) && !ellipse(26940.751617, 31148.269470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27131.996033, 29626.117279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26605.788000, 29552.915200, 688.572820, 688.572820, 0.000000, X, Y) && !ellipse(27655.134000, 29061.050000, 592.246417, 592.246417, 0.000000, X, Y) && !ellipse(25908.263824, 26768.326050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25177.496216, 26823.741821, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 13 11:09:45 2012] Writing fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src49.gif
[Tue Mar 13 11:09:50 2012] ../../xmm0110980801/products/events/fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src49_src.evt and ../../xmm0110980801/products/events/fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src49_bgd.evt exist, delete to re-create
[Tue Mar 13 11:09:50 2012] Mean detx,y = (-95.23, -1308.05) 
[Tue Mar 13 11:09:50 2012] ../../xmm0110980801/products/images/fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src49_src.img and ../../xmm0110980801/products/images/fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src49_bgd.img exist, delete to re-create
[Tue Mar 13 11:09:50 2012] ../../xmm0110980801/products/spectra/fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src49_src_b10.pi.gz and ../../xmm0110980801/products/spectra/fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src49_bgd.pi exist, delete to re-create
[Tue Mar 13 11:09:50 2012] Setting source spectrum file to fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Tue Mar 13 11:09:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Tue Mar 13 11:09:50 2012] ../../xmm0110980801/products/lightcurves/fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src49_src.lc and ../../xmm0110980801/products/lightcurves/fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src49_bgd.lc exist, delete to re-create
[Tue Mar 13 11:10:13 2012] Not generating rmf since there are only 40 counts
[Tue Mar 13 11:10:13 2012] rmf not generated due to insufficient counts
[Tue Mar 13 11:10:13 2012] fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src49.arf exists, delete to re-create
[Tue Mar 13 11:11:42 2012] Updating aperture counts using extracted products
[Tue Mar 13 11:11:42 2012] Error reading totcts from fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Tue Mar 13 11:11:48 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:11:48 2012] Using photon index=1.80, rate=0.00176, arf fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src49.arf
[Tue Mar 13 11:11:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 11:11:48 2012] Updating source flux to 4.8e-15
[Tue Mar 13 11:12:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting