[Tue Mar 13 11:04:51 2012] Detection parameters:
  Position = (323.1, 262.2) = 5 7 34.54 -37 35 6.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1960.3 +/- 53.9
  Background counts = 32.3
  Rate = 0.07 +/- 0.002

[Tue Mar 13 11:04:57 2012] Off-axis axis estimate = 3.18'
[Tue Mar 13 11:06:07 2012] Using EEF radius (= 8.02 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:06:07 2012] Initial guess for spatial extent in simple fitting = 8.02"
[Tue Mar 13 11:06:07 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.910
[Tue Mar 13 11:06:07 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.02"
[Tue Mar 13 11:06:08 2012] fullrun_pn_xmm0110980801_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar 13 11:06:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110980801_pi300-10000_cl_pass0_src1.csv
[Tue Mar 13 11:06:08 2012] fullrun_pn_xmm0110980801_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar 13 11:06:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110980801_pi300-10000_cl_pass0_src1.csv
[Tue Mar 13 11:06:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110980801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110980801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:06:09 2012] fullrun_pn_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar 13 11:06:09 2012] fullrun_pn_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar 13 11:06:09 2012] Fit fullrun_pn_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar 13 11:06:42 2012] Spatial fit model total counts = 2022.080000, observed total counts = 2027.000000
[Tue Mar 13 11:06:42 2012] Offset between fit and detection position for source 1 = 0.113325 pixels
[Tue Mar 13 11:06:42 2012] 2026.824000 total counts/ 696.874000 bgd. counts: snr = 50.380002
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.113325 pixels
  Position = (323.1, 262.3) = 5 7 34.55 -37 35 6.6
  Extent = 5.3 (5.0-5.5)", rotation angle = 0
  Source counts = 1330.0 +/- 45.0
  Background counts = 696.9
  Rate = 0.04 +/- 0.001
[Tue Mar 13 11:06:42 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:06:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:06:42 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:06:42 2012] Source does appear to be extended
[Tue Mar 13 11:06:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:07:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:07:47 2012] Initial guess for spatial extent in simple fitting = 5.32"
[Tue Mar 13 11:07:47 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.011
[Tue Mar 13 11:07:47 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.32"
[Tue Mar 13 11:07:51 2012] fullrun_pn_xmm0110980801_pi300-10000_cl_pass1_src1.ximg exists
[Tue Mar 13 11:07:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110980801_pi300-10000_cl_pass1_src1.csv
[Tue Mar 13 11:07:51 2012] fullrun_pn_xmm0110980801_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Mar 13 11:07:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110980801_pi300-10000_cl_pass1_src1.csv
[Tue Mar 13 11:07:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110980801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110980801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:07:59 2012] fullrun_pn_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar 13 11:07:59 2012] fullrun_pn_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar 13 11:07:59 2012] Fit fullrun_pn_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Mar 13 11:08:44 2012] Spatial fit model total counts = 2030.310000, observed total counts = 2027.000000
[Tue Mar 13 11:08:44 2012] Offset between fit and detection position for source 1 = 0.000134 pixels
[Tue Mar 13 11:08:44 2012] 2035.179000 total counts/ 697.599000 bgd. counts: snr = 50.642699
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000134 pixels
  Position = (323.1, 262.3) = 5 7 34.55 -37 35 6.6
  Extent = 5.3 (5.0-5.5)", rotation angle = 0
  Source counts = 1337.6 +/- 45.1
  Background counts = 697.6
  Rate = 0.04 +/- 0.001
[Tue Mar 13 11:08:44 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:08:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:08:44 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:08:44 2012] Source does appear to be extended
[Tue Mar 13 11:08:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:09:43 2012] Counts = 1337.580000, rescaling region sizes by 2.000000
[Tue Mar 13 11:09:43 2012] XMMSAS src. selection expression = ellipse(28064.950540, 22771.302200, 639.800418, 639.800418, 0.000000, X, Y)
[Tue Mar 13 11:09:43 2012] Not overwriting source region fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src1_src.reg
[Tue Mar 13 11:09:43 2012] Extracting stamp from image fullrun_pn_xmm0110980801_pi300-10000_cl_sm2.00.img.gz, (286, 226) - (360, 299)
[Tue Mar 13 11:09:43 2012] XMMSAS bgd. selection expression = annulus(28064.950540, 22771.302200, 2132.668061, 4265.336123, X, Y) && !ellipse(26176.439000, 27986.264600, 2054.203259, 1731.199250, 311.538000, X, Y) && !ellipse(24591.489680, 18804.494200, 529.834415, 369.857611, 13.564370, X, Y) && !ellipse(26190.833800, 26139.389400, 348.367210, 348.367210, 0.000000, X, Y) && !ellipse(25908.263824, 26768.326050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25177.496216, 26823.741821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27286.653060, 26482.905800, 282.181608, 282.181608, 0.000000, X, Y) && !ellipse(27195.219000, 25113.486000, 423.771580, 423.771580, 0.000000, X, Y) && !ellipse(26928.702860, 22197.397400, 378.956011, 378.956011, 0.000000, X, Y) && !ellipse(29681.574850, 21966.731914, 541.471911, 536.699587, 81.923781, X, Y) && !ellipse(29684.550200, 19261.617600, 401.461612, 401.461612, 0.000000, X, Y) && !ellipse(26040.837402, 18258.594742, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 13 11:09:43 2012] Writing fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src1.gif
[Tue Mar 13 11:09:46 2012] ../../xmm0110980801/products/events/fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0110980801/products/events/fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Mar 13 11:09:46 2012] Mean detx,y = (-387.18, 5221.62) 
[Tue Mar 13 11:09:46 2012] ../../xmm0110980801/products/images/fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src1_src.img and ../../xmm0110980801/products/images/fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Mar 13 11:09:46 2012] ../../xmm0110980801/products/spectra/fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0110980801/products/spectra/fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Mar 13 11:09:46 2012] Setting source spectrum file to fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Mar 13 11:09:46 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Mar 13 11:09:46 2012] ../../xmm0110980801/products/lightcurves/fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0110980801/products/lightcurves/fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Mar 13 11:10:13 2012] fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Tue Mar 13 11:10:13 2012] fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Tue Mar 13 11:11:39 2012] Updating aperture counts using extracted products
[Tue Mar 13 11:11:40 2012] Error reading totcts from fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Mar 13 11:11:44 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:11:44 2012] Using photon index=1.80, rate=0.0377, arf fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src1.arf
[Tue Mar 13 11:11:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 11:11:44 2012] Updating source flux to 1.2e-13
[Tue Mar 13 11:12:10 2012] Reading fit data from xmm0110980801/analysis//spectral/fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src1_pl.csv
[Tue Mar 13 11:12:10 2012] Spectral fit parameter nH value = 2.42882e+21
[Tue Mar 13 11:12:10 2012] Spectral fit parameter PhoIndex value = 4.21828
[Tue Mar 13 11:12:10 2012] Failed to get F(0.3-8.0) from xmm0110980801/analysis//spectral/fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Mar 13 11:12:10 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:12:10 2012] Using Nh = 2.4e+21, photon index=4.22, rate=0.0377, arf fullrun_pn_xmm0110980801_pi300-10000_pass1_cl_src1.arf
[Tue Mar 13 11:12:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 11:12:10 2012] Updating source flux to 7.1e-14