[Tue Mar 13 11:05:04 2012] Detection parameters:
  Position = (312.0, 329.0) = 5 7 38.62 -37 30 18.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.3 +/- 9.7
  Background counts = 12.4
  Rate = 0.0009 +/- 0.0003

[Tue Mar 13 11:05:06 2012] Off-axis axis estimate = 2.43'
[Tue Mar 13 11:06:12 2012] Using EEF radius (= 7.64 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:06:12 2012] Initial guess for spatial extent in simple fitting = 7.64"
[Tue Mar 13 11:06:12 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.785
[Tue Mar 13 11:06:12 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 7.64"
[Tue Mar 13 11:06:14 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src49.ximg exists
[Tue Mar 13 11:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src49.csv
[Tue Mar 13 11:06:14 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src49_1.ximg exists
[Tue Mar 13 11:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src49.csv
[Tue Mar 13 11:06:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:06:15 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Tue Mar 13 11:06:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src49.csv
[Tue Mar 13 11:06:15 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Tue Mar 13 11:06:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src49.csv
[Tue Mar 13 11:06:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:07:08 2012] Source 33 is offset by 7.046619 and 5.754265 pixels which is larger than
2 X fitted extent = 2.504372 x 2.504372, not incorporating fit results
[Tue Mar 13 11:07:08 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:07:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:07:08 2012] Assessing source extent using major
[Tue Mar 13 11:07:08 2012] Source does appear to be extended
[Tue Mar 13 11:07:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:07:08 2012] Source is confused with source 31
[Tue Mar 13 11:08:12 2012] Using EEF radius (= 7.64 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:08:12 2012] Initial guess for spatial extent in simple fitting = 7.64"
[Tue Mar 13 11:08:12 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.785
[Tue Mar 13 11:08:12 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 7.64"
[Tue Mar 13 11:08:19 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_src45.ximg exists
[Tue Mar 13 11:08:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_src45.csv
[Tue Mar 13 11:08:19 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_src45_1.ximg exists
[Tue Mar 13 11:08:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_src45.csv
[Tue Mar 13 11:08:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:08:20 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Tue Mar 13 11:08:20 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Tue Mar 13 11:08:20 2012] Fit fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Tue Mar 13 11:09:11 2012] Source 33 is offset by 7.046619 and 5.627116 pixels which is larger than
2 X fitted extent = 3.117297 x 3.117297, not incorporating fit results
[Tue Mar 13 11:09:11 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:09:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:09:11 2012] Assessing source extent using major
[Tue Mar 13 11:09:11 2012] Source does appear to be extended
[Tue Mar 13 11:09:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:10:30 2012] XMMSAS src. selection expression = ellipse(27097.201874, 28576.993073, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 13 11:10:30 2012] Not overwriting source region fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src33_src.reg
[Tue Mar 13 11:10:30 2012] Extracting stamp from image fullrun_mos2_xmm0110980801_pi300-10000_cl_sm2.00.img.gz, (275, 292) - (350, 367)
[Tue Mar 13 11:10:30 2012] XMMSAS bgd. selection expression = annulus(27097.201874, 28576.993073, 1087.500000, 2175.000000, X, Y) && !ellipse(26181.461800, 27970.244800, 659.289619, 512.922415, 134.194952, X, Y) && !ellipse(28448.780200, 29607.527000, 309.511209, 309.511209, 0.000000, X, Y) && !ellipse(26931.354000, 29195.260000, 1276.968037, 1276.968037, 0.000000, X, Y) && !ellipse(27662.294000, 30085.326000, 2560.592074, 2560.592074, 0.000000, X, Y) && !ellipse(25900.091644, 26572.058319, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 13 11:10:30 2012] Writing fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src33.gif
[Tue Mar 13 11:10:31 2012] ../../xmm0110980801/products/events/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src33_src.evt and ../../xmm0110980801/products/events/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src33_bgd.evt exist, delete to re-create
[Tue Mar 13 11:10:31 2012] Mean detx,y = (-770.36, 368.84) 
[Tue Mar 13 11:10:31 2012] ../../xmm0110980801/products/images/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src33_src.img and ../../xmm0110980801/products/images/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src33_bgd.img exist, delete to re-create
[Tue Mar 13 11:10:31 2012] ../../xmm0110980801/products/spectra/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src33_src_b10.pi.gz and ../../xmm0110980801/products/spectra/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src33_bgd.pi exist, delete to re-create
[Tue Mar 13 11:10:31 2012] Setting source spectrum file to fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Tue Mar 13 11:10:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Tue Mar 13 11:10:31 2012] ../../xmm0110980801/products/lightcurves/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src33_src.lc and ../../xmm0110980801/products/lightcurves/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src33_bgd.lc exist, delete to re-create
[Tue Mar 13 11:10:44 2012] Not generating rmf since there are only 35 counts
[Tue Mar 13 11:10:44 2012] rmf not generated due to insufficient counts
[Tue Mar 13 11:10:44 2012] fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src33.arf exists, delete to re-create
[Tue Mar 13 11:11:58 2012] Updating aperture counts using extracted products
[Tue Mar 13 11:11:58 2012] Error reading totcts from fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Tue Mar 13 11:12:00 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:12:00 2012] Using photon index=1.80, rate=0.000948, arf fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src33.arf
[Tue Mar 13 11:12:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 11:12:01 2012] Updating source flux to 8.9e-15
[Tue Mar 13 11:12:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting