[Tue Mar 13 11:05:04 2012] Detection parameters:
  Position = (379.4, 332.4) = 5 7 14.00 -37 30 3.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.2 +/- 8.5
  Background counts = 11.0
  Rate = 0.001 +/- 0.0003

[Tue Mar 13 11:05:06 2012] Off-axis axis estimate = 6.36'
[Tue Mar 13 11:06:12 2012] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:06:12 2012] Initial guess for spatial extent in simple fitting = 9.61"
[Tue Mar 13 11:06:12 2012] source mask rpix=2.2, npix_max = 29, mask sum = 21, frac = 0.715
[Tue Mar 13 11:06:12 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 9.61"
[Tue Mar 13 11:06:14 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src35.ximg exists
[Tue Mar 13 11:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src35.csv
[Tue Mar 13 11:06:14 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src35_1.ximg exists
[Tue Mar 13 11:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src35.csv
[Tue Mar 13 11:06:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:06:15 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Tue Mar 13 11:06:15 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Tue Mar 13 11:06:15 2012] Fit fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Tue Mar 13 11:07:08 2012] Spatial fit model total counts = 143.400000, observed total counts = 143.000000
[Tue Mar 13 11:07:08 2012] Offset between fit and detection position for source 32 = 0.786972 pixels
[Tue Mar 13 11:07:08 2012] 139.741400 total counts/ 112.273000 bgd. counts: snr = 2.592362
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.786972 pixels
  Position = (378.6, 332.3) = 5 7 14.29 -37 30 1.8
  Extent = 5.5 (2.4-7.2)", rotation angle = 0
  Source counts = 27.5 +/- 11.8
  Background counts = 112.3
  Rate = 0.0007 +/- 0.0003
[Tue Mar 13 11:07:08 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:07:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:07:08 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:07:08 2012] Source does appear to be extended
[Tue Mar 13 11:07:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:08:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:08:12 2012] Initial guess for spatial extent in simple fitting = 5.52"
[Tue Mar 13 11:08:12 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.719
[Tue Mar 13 11:08:12 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 5.52"
[Tue Mar 13 11:08:18 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_src32.ximg exists
[Tue Mar 13 11:08:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_src32.csv
[Tue Mar 13 11:08:18 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_src32_1.ximg exists
[Tue Mar 13 11:08:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_src32.csv
[Tue Mar 13 11:08:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:08:20 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Tue Mar 13 11:08:20 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Tue Mar 13 11:08:20 2012] Fit fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Tue Mar 13 11:09:11 2012] Warning, spatial fit 32 centroid is now closest to src. 24
[Tue Mar 13 11:09:11 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:09:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:09:11 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:09:11 2012] Source does appear to be extended
[Tue Mar 13 11:09:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:10:29 2012] XMMSAS src. selection expression = ellipse(32889.184400, 28863.249800, 331.341610, 331.341610, 0.000000, X, Y)
[Tue Mar 13 11:10:29 2012] Not overwriting source region fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src32_src.reg
[Tue Mar 13 11:10:29 2012] Extracting stamp from image fullrun_mos2_xmm0110980801_pi300-10000_cl_sm2.00.img.gz, (360, 313) - (398, 351)
[Tue Mar 13 11:10:29 2012] XMMSAS bgd. selection expression = annulus(32889.184400, 28863.249800, 552.236016, 1104.472032, X, Y) && !ellipse(31906.312400, 29961.309800, 293.459208, 293.459208, 0.000000, X, Y)
[Tue Mar 13 11:10:29 2012] Writing fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src32.gif
[Tue Mar 13 11:10:31 2012] ../../xmm0110980801/products/events/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src32_src.evt and ../../xmm0110980801/products/events/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src32_bgd.evt exist, delete to re-create
[Tue Mar 13 11:10:31 2012] Mean detx,y = (-6371.26, -1725.69) 
[Tue Mar 13 11:10:31 2012] ../../xmm0110980801/products/images/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src32_src.img and ../../xmm0110980801/products/images/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src32_bgd.img exist, delete to re-create
[Tue Mar 13 11:10:31 2012] ../../xmm0110980801/products/spectra/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src32_src_b10.pi.gz and ../../xmm0110980801/products/spectra/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src32_bgd.pi exist, delete to re-create
[Tue Mar 13 11:10:31 2012] Setting source spectrum file to fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Tue Mar 13 11:10:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Tue Mar 13 11:10:31 2012] ../../xmm0110980801/products/lightcurves/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src32_src.lc and ../../xmm0110980801/products/lightcurves/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src32_bgd.lc exist, delete to re-create
[Tue Mar 13 11:10:44 2012] Not generating rmf since there are only 27 counts
[Tue Mar 13 11:10:44 2012] rmf not generated due to insufficient counts
[Tue Mar 13 11:10:44 2012] fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src32.arf exists, delete to re-create
[Tue Mar 13 11:11:57 2012] Updating aperture counts using extracted products
[Tue Mar 13 11:11:57 2012] Error reading totcts from fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Tue Mar 13 11:12:00 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:12:00 2012] Using photon index=1.80, rate=0.000686, arf fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src32.arf
[Tue Mar 13 11:12:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 11:12:00 2012] Updating source flux to 1.1e-14
[Tue Mar 13 11:12:08 2012] Source 32 has fewer than 100.000000 counts, skipping spectral fitting