[Tue Mar 13 11:05:04 2012] Detection parameters:
  Position = (308.7, 334.1) = 5 7 39.84 -37 29 55.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.1 +/- 10.6
  Background counts = 12.4
  Rate = 0.001 +/- 0.0003

[Tue Mar 13 11:05:06 2012] Off-axis axis estimate = 2.69'
[Tue Mar 13 11:06:12 2012] Using EEF radius (= 7.77 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:06:12 2012] Initial guess for spatial extent in simple fitting = 7.77"
[Tue Mar 13 11:06:12 2012] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.669
[Tue Mar 13 11:06:12 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 7.77"
[Tue Mar 13 11:06:14 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src32.ximg exists
[Tue Mar 13 11:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src32.csv
[Tue Mar 13 11:06:14 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src32_1.ximg exists
[Tue Mar 13 11:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src32.csv
[Tue Mar 13 11:06:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:06:15 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Tue Mar 13 11:06:15 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Tue Mar 13 11:06:15 2012] Fit fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Tue Mar 13 11:07:08 2012] Source 31 is offset by 5.237838 and 6.242796 pixels which is larger than
2 X fitted extent = 3.800396 x 3.800396, not incorporating fit results
[Tue Mar 13 11:07:08 2012] Spatial fit model total counts = 243.619000, observed total counts = 243.000000
[Tue Mar 13 11:07:08 2012] Offset between fit and detection position for source 31 = 2.696167 pixels
[Tue Mar 13 11:07:08 2012] Warning, changing simple spatial fit ID from 32 to 41
[Tue Mar 13 11:07:08 2012] 242.085000 total counts/ 128.732000 bgd. counts: snr = 9.990558
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 2.696167 pixels
  Position = (310.1, 336.4) = 5 7 39.32 -37 29 44.4
  Extent = 16.0 (11.0-32.0)", rotation angle = 0
  Source counts = 113.4 +/- 15.6
  Background counts = 128.7
  Rate = 0.003 +/- 0.0004
[Tue Mar 13 11:07:08 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:07:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:07:08 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:07:08 2012] Source does appear to be extended
[Tue Mar 13 11:07:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:07:08 2012] Source is confused with source 30
[Tue Mar 13 11:07:08 2012] Source is confused with source 33
[Tue Mar 13 11:08:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:08:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 13 11:08:12 2012] Initial guess for spatial extent in simple fitting = 16.00"
[Tue Mar 13 11:08:12 2012] source mask rpix=3.7, npix_max = 69, mask sum = 66, frac = 0.945
[Tue Mar 13 11:08:12 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 16.00"
[Tue Mar 13 11:08:17 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_src29.ximg exists
[Tue Mar 13 11:08:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_src29.csv
[Tue Mar 13 11:08:17 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_src29_1.ximg exists
[Tue Mar 13 11:08:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_src29.csv
[Tue Mar 13 11:08:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:08:20 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Tue Mar 13 11:08:20 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Tue Mar 13 11:08:20 2012] Fit fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Tue Mar 13 11:09:11 2012] Warning, spatial fit 29 centroid is now closest to src. 30
[Tue Mar 13 11:09:11 2012] Spatial fit model total counts = 243.668000, observed total counts = 243.000000
[Tue Mar 13 11:09:11 2012] Offset between fit and detection position for source 31 = 0.236640 pixels
[Tue Mar 13 11:09:11 2012] Warning, changing simple spatial fit ID from 29 to 38
[Tue Mar 13 11:09:11 2012] 235.275000 total counts/ 123.592000 bgd. counts: snr = 10.045970
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.236640 pixels
  Position = (310.1, 336.1) = 5 7 39.32 -37 29 45.4
  Extent = 16.0 (15.9-16.0)", rotation angle = 0
  Source counts = 111.7 +/- 15.3
  Background counts = 123.6
  Rate = 0.003 +/- 0.0004
[Tue Mar 13 11:09:11 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:09:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:09:11 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:09:11 2012] Source does appear to be extended
[Tue Mar 13 11:09:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:10:29 2012] XMMSAS src. selection expression = ellipse(26931.354000, 29195.260000, 957.726028, 957.726028, 0.000000, X, Y)
[Tue Mar 13 11:10:29 2012] Not overwriting source region fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src31_src.reg
[Tue Mar 13 11:10:29 2012] Extracting stamp from image fullrun_mos2_xmm0110980801_pi300-10000_cl_sm2.00.img.gz, (255, 281) - (365, 391)
[Tue Mar 13 11:10:29 2012] XMMSAS bgd. selection expression = annulus(26931.354000, 29195.260000, 1596.210046, 3192.420092, X, Y) && !ellipse(26181.461800, 27970.244800, 659.289619, 512.922415, 134.194952, X, Y) && !ellipse(23375.832600, 31935.315600, 367.857369, 367.857369, 0.000000, X, Y) && !ellipse(28448.780200, 29607.527000, 309.511209, 309.511209, 0.000000, X, Y) && !ellipse(27847.928800, 31585.026400, 332.044091, 332.044091, 0.000000, X, Y) && !ellipse(30069.370720, 30444.204400, 674.115219, 674.115219, 0.000000, X, Y) && !ellipse(27662.294000, 30085.326000, 2560.592074, 2560.592074, 0.000000, X, Y) && !ellipse(25900.091644, 26572.058319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27097.201874, 28576.993073, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 13 11:10:29 2012] Writing fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src31.gif
[Tue Mar 13 11:10:31 2012] ../../xmm0110980801/products/events/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src31_src.evt and ../../xmm0110980801/products/events/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src31_bgd.evt exist, delete to re-create
[Tue Mar 13 11:10:31 2012] Mean detx,y = (-868.51, 768.95) 
[Tue Mar 13 11:10:31 2012] ../../xmm0110980801/products/images/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src31_src.img and ../../xmm0110980801/products/images/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src31_bgd.img exist, delete to re-create
[Tue Mar 13 11:10:31 2012] ../../xmm0110980801/products/spectra/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src31_src_b10.pi.gz and ../../xmm0110980801/products/spectra/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src31_bgd.pi exist, delete to re-create
[Tue Mar 13 11:10:31 2012] Setting source spectrum file to fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Tue Mar 13 11:10:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Tue Mar 13 11:10:31 2012] ../../xmm0110980801/products/lightcurves/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src31_src.lc and ../../xmm0110980801/products/lightcurves/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src31_bgd.lc exist, delete to re-create
[Tue Mar 13 11:10:44 2012] fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src31.rmf exists, delete to re-create
[Tue Mar 13 11:10:44 2012] fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src31.arf exists, delete to re-create
[Tue Mar 13 11:11:57 2012] Updating aperture counts using extracted products
[Tue Mar 13 11:11:57 2012] Error reading totcts from fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Tue Mar 13 11:12:00 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:12:00 2012] Using photon index=1.80, rate=0.00279, arf fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src31.arf
[Tue Mar 13 11:12:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 11:12:00 2012] Updating source flux to 2.5e-14
[Tue Mar 13 11:12:08 2012] Flag b found in src. 31 procflags, skipping spectral fitting
[Tue Mar 13 11:12:08 2012] Flag c found in src. 31 procflags, skipping spectral fitting