[Tue Mar 13 11:05:01 2012] Detection parameters:
  Position = (301.8, 322.0) = 5 7 42.37 -37 30 46.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5511.5 +/- 88.1
  Background counts = 12.4
  Rate = 0.1 +/- 0.002

[Tue Mar 13 11:05:06 2012] Off-axis axis estimate = 1.73'
[Tue Mar 13 11:06:12 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:06:12 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Tue Mar 13 11:06:12 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Tue Mar 13 11:06:12 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Tue Mar 13 11:06:13 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar 13 11:06:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src1.csv
[Tue Mar 13 11:06:13 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar 13 11:06:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src1.csv
[Tue Mar 13 11:06:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:06:14 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar 13 11:06:14 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar 13 11:06:14 2012] Fit fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar 13 11:07:08 2012] Spatial fit model total counts = 5806.650000, observed total counts = 5799.000000
[Tue Mar 13 11:07:08 2012] Offset between fit and detection position for source 3 = 0.229506 pixels
[Tue Mar 13 11:07:08 2012] 5784.810000 total counts/ 1438.410000 bgd. counts: snr = 114.600984
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.229506 pixels
  Position = (301.5, 322.1) = 5 7 42.45 -37 30 46.6
  Extent = 7.3 (7.2-7.5)", rotation angle = 0
  Source counts = 4346.4 +/- 76.1
  Background counts = 1438.4
  Rate = 0.1 +/- 0.002
[Tue Mar 13 11:07:08 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:07:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:07:08 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:07:08 2012] Source does appear to be extended
[Tue Mar 13 11:07:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:08:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:08:12 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Tue Mar 13 11:08:12 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.048
[Tue Mar 13 11:08:12 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.33"
[Tue Mar 13 11:08:12 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_src1.ximg exists
[Tue Mar 13 11:08:13 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Mar 13 11:08:13 2012] Fit fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Mar 13 11:08:19 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar 13 11:08:19 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar 13 11:08:19 2012] Fit fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Mar 13 11:09:11 2012] Spatial fit model total counts = 5801.310000, observed total counts = 5801.000000
[Tue Mar 13 11:09:11 2012] Offset between fit and detection position for source 3 = 0.053042 pixels
[Tue Mar 13 11:09:11 2012] 5804.750000 total counts/ 1471.110000 bgd. counts: snr = 112.987463
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.053042 pixels
  Position = (301.5, 322.1) = 5 7 42.47 -37 30 46.7
  Extent = 8.2" x 6.4", rotation angle = 134
  Source counts = 4333.6 +/- 76.2
  Background counts = 1471.1
  Rate = 0.1 +/- 0.002
[Tue Mar 13 11:09:11 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:09:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:09:11 2012] Assessing source extent using major
[Tue Mar 13 11:09:11 2012] Source does appear to be extended
[Tue Mar 13 11:09:11 2012] Computing asymmetry using major and minor axis, asym = 1.29
[Tue Mar 13 11:10:28 2012] Counts = 4333.640000, rescaling region sizes by 2.000000
[Tue Mar 13 11:10:28 2012] XMMSAS src. selection expression = ellipse(26181.461800, 27970.244800, 988.934428, 769.383622, 134.194952, X, Y)
[Tue Mar 13 11:10:28 2012] Not overwriting source region fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src3_src.reg
[Tue Mar 13 11:10:28 2012] Extracting stamp from image fullrun_mos2_xmm0110980801_pi300-10000_cl_sm2.00.img.gz, (245, 265) - (358, 379)
[Tue Mar 13 11:10:28 2012] XMMSAS bgd. selection expression = annulus(26181.461800, 27970.244800, 3296.448095, 6592.896190, X, Y) && !ellipse(28053.854996, 22764.521600, 385.836011, 385.836011, 0.000000, X, Y) && !ellipse(23678.785400, 33381.173800, 430.173612, 430.173612, 0.000000, X, Y) && !ellipse(31906.312400, 29961.309800, 293.459208, 293.459208, 0.000000, X, Y) && !ellipse(23375.832600, 31935.315600, 367.857369, 367.857369, 0.000000, X, Y) && !ellipse(22033.380600, 29862.889440, 661.644019, 661.644019, 0.000000, X, Y) && !ellipse(28448.780200, 29607.527000, 309.511209, 309.511209, 0.000000, X, Y) && !ellipse(32778.212600, 33949.106600, 999.448029, 530.876815, 330.727408, X, Y) && !ellipse(32810.535522, 31068.892059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29763.578200, 32889.161000, 381.703211, 381.703211, 0.000000, X, Y) && !ellipse(30854.781280, 31149.320000, 277.640808, 277.640808, 0.000000, X, Y) && !ellipse(18840.400604, 33507.162109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27847.928800, 31585.026400, 332.044091, 332.044091, 0.000000, X, Y) && !ellipse(27192.340140, 25133.239200, 190.142405, 190.142405, 0.000000, X, Y) && !ellipse(26931.354000, 29195.260000, 1276.968037, 1276.968037, 0.000000, X, Y) && !ellipse(20844.129080, 25248.964800, 318.496809, 318.496809, 0.000000, X, Y) && !ellipse(30069.370720, 30444.204400, 674.115219, 674.115219, 0.000000, X, Y) && !ellipse(32889.184400, 28863.249800, 441.788813, 441.788813, 0.000000, X, Y) && !ellipse(24730.474500, 21839.742000, 388.514981, 388.514981, 0.000000, X, Y) && !ellipse(26900.549400, 22187.717000, 418.808812, 418.808812, 0.000000, X, Y) && !ellipse(21628.394400, 23247.284600, 1353.136039, 530.811215, 61.960142, X, Y) && !ellipse(27662.294000, 30085.326000, 2560.592074, 2560.592074, 0.000000, X, Y) && !ellipse(25900.091644, 26572.058319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27097.201874, 28576.993073, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 13 11:10:28 2012] Writing fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src3.gif
[Tue Mar 13 11:10:30 2012] ../../xmm0110980801/products/events/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0110980801/products/events/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Tue Mar 13 11:10:30 2012] Mean detx,y = (124.23, 136.69) 
[Tue Mar 13 11:10:30 2012] ../../xmm0110980801/products/images/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src3_src.img and ../../xmm0110980801/products/images/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Tue Mar 13 11:10:30 2012] ../../xmm0110980801/products/spectra/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0110980801/products/spectra/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Tue Mar 13 11:10:30 2012] Setting source spectrum file to fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Mar 13 11:10:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Mar 13 11:10:30 2012] ../../xmm0110980801/products/lightcurves/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0110980801/products/lightcurves/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Tue Mar 13 11:10:44 2012] fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src3.rmf exists, delete to re-create
[Tue Mar 13 11:10:44 2012] fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Tue Mar 13 11:11:55 2012] Updating aperture counts using extracted products
[Tue Mar 13 11:11:55 2012] Error reading totcts from fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Mar 13 11:11:58 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:11:58 2012] Using photon index=1.80, rate=0.108, arf fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src3.arf
[Tue Mar 13 11:11:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 11:11:58 2012] Updating source flux to 1.1e-12
[Tue Mar 13 11:12:09 2012] Reading fit data from xmm0110980801/analysis//spectral/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src3_pl.csv
[Tue Mar 13 11:12:09 2012] Spectral fit parameter nH value = 1.89043e+21
[Tue Mar 13 11:12:09 2012] Spectral fit parameter PhoIndex value = 2.45534
[Tue Mar 13 11:12:09 2012] Failed to get F(0.3-8.0) from xmm0110980801/analysis//spectral/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Tue Mar 13 11:12:09 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:12:09 2012] Using Nh = 1.9e+21, photon index=2.46, rate=0.108, arf fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src3.arf
[Tue Mar 13 11:12:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 11:12:09 2012] Updating source flux to 9.7e-13