[Tue Mar 13 11:05:02 2012] Detection parameters:
  Position = (414.2, 446.8) = 5 7 1.34 -37 21 42.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.8 +/- 8.6
  Background counts = 8.6
  Rate = 0.001 +/- 0.0002

[Tue Mar 13 11:05:06 2012] Off-axis axis estimate = 13.65'
[Tue Mar 13 11:06:12 2012] Using EEF radius (= 13.25 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:06:12 2012] Initial guess for spatial extent in simple fitting = 13.25"
[Tue Mar 13 11:06:12 2012] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.974
[Tue Mar 13 11:06:12 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 13.25"
[Tue Mar 13 11:06:14 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src48.ximg exists
[Tue Mar 13 11:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src48.csv
[Tue Mar 13 11:06:14 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src48_1.ximg exists
[Tue Mar 13 11:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src48.csv
[Tue Mar 13 11:06:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:06:15 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Tue Mar 13 11:06:15 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Tue Mar 13 11:06:15 2012] Fit fullrun_mos2_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Tue Mar 13 11:07:08 2012] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 13.718730 pixels away
[Tue Mar 13 11:07:08 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:07:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:07:08 2012] Assessing source extent using major
[Tue Mar 13 11:07:08 2012] Source does appear to be extended
[Tue Mar 13 11:07:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:08:12 2012] Using EEF radius (= 13.25 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:08:12 2012] Initial guess for spatial extent in simple fitting = 13.25"
[Tue Mar 13 11:08:12 2012] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.974
[Tue Mar 13 11:08:12 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 13.25"
[Tue Mar 13 11:08:19 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_src44.ximg exists
[Tue Mar 13 11:08:19 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_src44.csv
[Tue Mar 13 11:08:19 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_src44_1.ximg exists
[Tue Mar 13 11:08:19 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_src44.csv
[Tue Mar 13 11:08:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:08:20 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Tue Mar 13 11:08:20 2012] fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Tue Mar 13 11:08:20 2012] Fit fullrun_mos2_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Tue Mar 13 11:09:11 2012] Spatial fit model total counts = 125.000000, observed total counts = 125.000000
[Tue Mar 13 11:09:11 2012] Offset between fit and detection position for source 15 = 0.086570 pixels
[Tue Mar 13 11:09:11 2012] 121.970500 total counts/ 89.347700 bgd. counts: snr = 3.451275
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.086570 pixels
  Position = (414.2, 446.7) = 5 7 1.34 -37 21 43.8
  Extent = 7.5 (4.8-10.3)", rotation angle = 0
  Source counts = 32.6 +/- 11.0
  Background counts = 89.3
  Rate = 0.0008 +/- 0.0003
[Tue Mar 13 11:09:11 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:09:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:09:11 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:09:11 2012] Source does appear to be extended
[Tue Mar 13 11:09:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:10:30 2012] XMMSAS src. selection expression = ellipse(35990.122000, 38817.635400, 449.092813, 449.092813, 0.000000, X, Y)
[Tue Mar 13 11:10:30 2012] Not overwriting source region fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src15_src.reg
[Tue Mar 13 11:10:30 2012] Extracting stamp from image fullrun_mos2_xmm0110980801_pi300-10000_cl_sm2.00.img.gz, (388, 421) - (440, 473)
[Tue Mar 13 11:10:30 2012] XMMSAS bgd. selection expression = annulus(35990.122000, 38817.635400, 748.488022, 1496.976043, X, Y)
[Tue Mar 13 11:10:30 2012] Writing fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src15.gif
[Tue Mar 13 11:10:31 2012] ../../xmm0110980801/products/events/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src15_src.evt and ../../xmm0110980801/products/events/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src15_bgd.evt exist, delete to re-create
[Tue Mar 13 11:10:31 2012] Mean detx,y = (-13224.84, 6122.13) 
[Tue Mar 13 11:10:31 2012] ../../xmm0110980801/products/images/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src15_src.img and ../../xmm0110980801/products/images/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src15_bgd.img exist, delete to re-create
[Tue Mar 13 11:10:31 2012] ../../xmm0110980801/products/spectra/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src15_src_b10.pi.gz and ../../xmm0110980801/products/spectra/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src15_bgd.pi exist, delete to re-create
[Tue Mar 13 11:10:31 2012] Setting source spectrum file to fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Mar 13 11:10:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Tue Mar 13 11:10:31 2012] ../../xmm0110980801/products/lightcurves/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src15_src.lc and ../../xmm0110980801/products/lightcurves/fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src15_bgd.lc exist, delete to re-create
[Tue Mar 13 11:10:44 2012] Not generating rmf since there are only 32 counts
[Tue Mar 13 11:10:44 2012] rmf not generated due to insufficient counts
[Tue Mar 13 11:10:44 2012] fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src15.arf exists, delete to re-create
[Tue Mar 13 11:11:58 2012] Updating aperture counts using extracted products
[Tue Mar 13 11:11:58 2012] Error reading totcts from fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Tue Mar 13 11:12:00 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:12:00 2012] Using photon index=1.80, rate=0.000815, arf fullrun_mos2_xmm0110980801_pi300-10000_pass1_cl_src15.arf
[Tue Mar 13 11:12:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 11:12:00 2012] Updating source flux to 2.2e-14
[Tue Mar 13 11:12:08 2012] Source 15 has fewer than 100.000000 counts, skipping spectral fitting