[Tue Mar 13 11:04:59 2012] Detection parameters:
  Position = (314.1, 314.8) = 5 7 37.87 -37 31 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.4 +/- 10.2
  Background counts = 14.2
  Rate = 0.001 +/- 0.0003

[Tue Mar 13 11:05:00 2012] Off-axis axis estimate = 1.64'
[Tue Mar 13 11:06:11 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:06:11 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Tue Mar 13 11:06:11 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Tue Mar 13 11:06:11 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 7.25"
[Tue Mar 13 11:06:12 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_src35.ximg exists
[Tue Mar 13 11:06:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_src35.csv
[Tue Mar 13 11:06:12 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_src35_1.ximg exists
[Tue Mar 13 11:06:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_src35.csv
[Tue Mar 13 11:06:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:06:12 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Tue Mar 13 11:06:12 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Tue Mar 13 11:06:12 2012] Fit fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Tue Mar 13 11:06:54 2012] Spatial fit model total counts = 459.105000, observed total counts = 454.000000
[Tue Mar 13 11:06:54 2012] Offset between fit and detection position for source 27 = 8.675102 pixels
[Tue Mar 13 11:06:54 2012] 455.078700 total counts/ 390.417000 bgd. counts: snr = 3.272523
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 8.675102 pixels
  Position = (320.1, 308.6) = 5 7 35.67 -37 31 45.4
  Extent = 14.5 (14.4-29.0)", rotation angle = 0
  Source counts = 64.7 +/- 21.3
  Background counts = 390.4
  Rate = 0.002 +/- 0.0005
[Tue Mar 13 11:06:54 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:06:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:06:54 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:06:54 2012] Source does appear to be extended
[Tue Mar 13 11:06:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:08:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:08:06 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 13 11:08:06 2012] Initial guess for spatial extent in simple fitting = 14.50"
[Tue Mar 13 11:08:06 2012] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.953
[Tue Mar 13 11:08:06 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 14.50"
[Tue Mar 13 11:08:09 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_src34.ximg exists
[Tue Mar 13 11:08:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_src34.csv
[Tue Mar 13 11:08:09 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_src34_1.ximg exists
[Tue Mar 13 11:08:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_src34.csv
[Tue Mar 13 11:08:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:08:11 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Tue Mar 13 11:08:11 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Tue Mar 13 11:08:11 2012] Fit fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Tue Mar 13 11:08:56 2012] Source 27 is offset by 6.185586 and -6.172805 pixels which is larger than
2 X fitted extent = 1.666543 x 1.666543, not incorporating fit results
[Tue Mar 13 11:08:56 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:08:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:08:56 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:08:56 2012] Source does appear to be extended
[Tue Mar 13 11:08:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:10:14 2012] XMMSAS src. selection expression = ellipse(27798.750000, 26795.918000, 869.934025, 869.934025, 0.000000, X, Y)
[Tue Mar 13 11:10:14 2012] Not overwriting source region fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src27_src.reg
[Tue Mar 13 11:10:14 2012] Extracting stamp from image fullrun_mos1_xmm0110980801_pi300-10000_cl_sm2.00.img.gz, (270, 259) - (370, 359)
[Tue Mar 13 11:10:14 2012] XMMSAS bgd. selection expression = annulus(27798.750000, 26795.918000, 1449.890042, 2899.780083, X, Y) && !ellipse(26188.039600, 27980.408800, 592.281617, 592.281617, 0.000000, X, Y) && !ellipse(28477.516880, 29625.380800, 269.495208, 269.495208, 0.000000, X, Y) && !ellipse(26187.205400, 26144.346000, 265.708808, 265.708808, 0.000000, X, Y) && !ellipse(27192.970240, 25105.749600, 278.410408, 278.410408, 0.000000, X, Y) && !ellipse(25963.233551, 28990.452820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30143.261230, 30403.414276, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 13 11:10:14 2012] Writing fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src27.gif
[Tue Mar 13 11:10:16 2012] ../../xmm0110980801/products/events/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src27_src.evt and ../../xmm0110980801/products/events/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src27_bgd.evt exist, delete to re-create
[Tue Mar 13 11:10:16 2012] Mean detx,y = (-1257.51, 596.51) 
[Tue Mar 13 11:10:16 2012] ../../xmm0110980801/products/images/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src27_src.img and ../../xmm0110980801/products/images/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src27_bgd.img exist, delete to re-create
[Tue Mar 13 11:10:16 2012] ../../xmm0110980801/products/spectra/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src27_src_b10.pi.gz and ../../xmm0110980801/products/spectra/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src27_bgd.pi exist, delete to re-create
[Tue Mar 13 11:10:16 2012] Setting source spectrum file to fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Tue Mar 13 11:10:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Tue Mar 13 11:10:16 2012] ../../xmm0110980801/products/lightcurves/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src27_src.lc and ../../xmm0110980801/products/lightcurves/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src27_bgd.lc exist, delete to re-create
[Tue Mar 13 11:10:28 2012] Not generating rmf since there are only 64 counts
[Tue Mar 13 11:10:28 2012] rmf not generated due to insufficient counts
[Tue Mar 13 11:10:28 2012] fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src27.arf exists, delete to re-create
[Tue Mar 13 11:11:52 2012] Updating aperture counts using extracted products
[Tue Mar 13 11:11:52 2012] Error reading totcts from fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Tue Mar 13 11:11:54 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:11:54 2012] Using photon index=1.80, rate=0.00162, arf fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src27.arf
[Tue Mar 13 11:11:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 11:11:54 2012] Updating source flux to 1.5e-14
[Tue Mar 13 11:12:07 2012] Flag b found in src. 27 procflags, skipping spectral fitting
[Tue Mar 13 11:12:07 2012] Source 27 has fewer than 100.000000 counts, skipping spectral fitting