[Tue Mar 13 11:04:59 2012] Detection parameters:
  Position = (299.0, 333.8) = 5 7 43.39 -37 29 51.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.6 +/- 11.0
  Background counts = 15.0
  Rate = 0.001 +/- 0.0003

[Tue Mar 13 11:05:00 2012] Off-axis axis estimate = 2.56'
[Tue Mar 13 11:06:11 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:06:11 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Tue Mar 13 11:06:11 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.775
[Tue Mar 13 11:06:11 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 7.71"
[Tue Mar 13 11:06:12 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_src33.ximg exists
[Tue Mar 13 11:06:12 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_src33_1.ximg exists
[Tue Mar 13 11:06:12 2012] Fit fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_src33 appears to have run properly
[Tue Mar 13 11:06:12 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Tue Mar 13 11:06:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src33.csv
[Tue Mar 13 11:06:12 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Tue Mar 13 11:06:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src33.csv
[Tue Mar 13 11:06:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:06:54 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 10.331909 pixels away
[Tue Mar 13 11:06:54 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:06:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:06:54 2012] Assessing source extent using major
[Tue Mar 13 11:06:54 2012] Source does appear to be extended
[Tue Mar 13 11:06:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:08:06 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:08:06 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Tue Mar 13 11:08:06 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.775
[Tue Mar 13 11:08:06 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 7.71"
[Tue Mar 13 11:08:09 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_src32.ximg exists
[Tue Mar 13 11:08:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_src32.csv
[Tue Mar 13 11:08:09 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_src32_1.ximg exists
[Tue Mar 13 11:08:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_src32.csv
[Tue Mar 13 11:08:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:08:11 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Tue Mar 13 11:08:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src32.csv
[Tue Mar 13 11:08:11 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Tue Mar 13 11:08:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src32.csv
[Tue Mar 13 11:08:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:08:56 2012] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 10.791195 pixels away
[Tue Mar 13 11:08:56 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:08:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:08:56 2012] Assessing source extent using major
[Tue Mar 13 11:08:56 2012] Source does appear to be extended
[Tue Mar 13 11:08:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:10:14 2012] XMMSAS src. selection expression = ellipse(25963.233551, 28990.452820, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 13 11:10:14 2012] Not overwriting source region fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src25_src.reg
[Tue Mar 13 11:10:14 2012] Extracting stamp from image fullrun_mos1_xmm0110980801_pi300-10000_cl_sm2.00.img.gz, (261, 296) - (336, 371)
[Tue Mar 13 11:10:14 2012] XMMSAS bgd. selection expression = annulus(25963.233551, 28990.452820, 1087.500000, 2175.000000, X, Y) && !ellipse(26188.039600, 27980.408800, 592.281617, 592.281617, 0.000000, X, Y) && !ellipse(27798.750000, 26795.918000, 1159.912033, 1159.912033, 0.000000, X, Y)
[Tue Mar 13 11:10:14 2012] Writing fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src25.gif
[Tue Mar 13 11:10:16 2012] ../../xmm0110980801/products/events/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src25_src.evt and ../../xmm0110980801/products/events/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src25_bgd.evt exist, delete to re-create
[Tue Mar 13 11:10:16 2012] Mean detx,y = (1121.30, -93.85) 
[Tue Mar 13 11:10:16 2012] ../../xmm0110980801/products/images/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src25_src.img and ../../xmm0110980801/products/images/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src25_bgd.img exist, delete to re-create
[Tue Mar 13 11:10:16 2012] ../../xmm0110980801/products/spectra/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src25_src_b10.pi.gz and ../../xmm0110980801/products/spectra/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src25_bgd.pi exist, delete to re-create
[Tue Mar 13 11:10:16 2012] Setting source spectrum file to fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Mar 13 11:10:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Tue Mar 13 11:10:16 2012] ../../xmm0110980801/products/lightcurves/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src25_src.lc and ../../xmm0110980801/products/lightcurves/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src25_bgd.lc exist, delete to re-create
[Tue Mar 13 11:10:28 2012] Not generating rmf since there are only 44 counts
[Tue Mar 13 11:10:28 2012] rmf not generated due to insufficient counts
[Tue Mar 13 11:10:28 2012] fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src25.arf exists, delete to re-create
[Tue Mar 13 11:11:51 2012] Updating aperture counts using extracted products
[Tue Mar 13 11:11:52 2012] Error reading totcts from fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Mar 13 11:11:54 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:11:54 2012] Using photon index=1.80, rate=0.00116, arf fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src25.arf
[Tue Mar 13 11:11:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 11:11:54 2012] Updating source flux to 1.1e-14
[Tue Mar 13 11:12:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting