[Tue Mar 13 11:04:59 2012] Detection parameters:
  Position = (367.3, 345.1) = 5 7 18.40 -37 29 6.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.1 +/- 14.6
  Background counts = 11.7
  Rate = 0.004 +/- 0.0004

[Tue Mar 13 11:05:00 2012] Off-axis axis estimate = 6.04'
[Tue Mar 13 11:06:11 2012] Using EEF radius (= 9.45 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:06:11 2012] Initial guess for spatial extent in simple fitting = 9.45"
[Tue Mar 13 11:06:11 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.051
[Tue Mar 13 11:06:11 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 9.45"
[Tue Mar 13 11:06:11 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_src5.ximg exists
[Tue Mar 13 11:06:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_src5.csv
[Tue Mar 13 11:06:11 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Mar 13 11:06:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_src5.csv
[Tue Mar 13 11:06:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:06:12 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Mar 13 11:06:12 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Mar 13 11:06:12 2012] Fit fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Mar 13 11:06:54 2012] Spatial fit model total counts = 223.616000, observed total counts = 223.000000
[Tue Mar 13 11:06:54 2012] Offset between fit and detection position for source 23 = 0.274778 pixels
[Tue Mar 13 11:06:54 2012] 213.020600 total counts/ 116.832000 bgd. counts: snr = 8.899031
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.274778 pixels
  Position = (367.4, 345.4) = 5 7 18.38 -37 29 4.9
  Extent = 5.7 (4.8-6.9)", rotation angle = 0
  Source counts = 96.2 +/- 14.6
  Background counts = 116.8
  Rate = 0.002 +/- 0.0004
[Tue Mar 13 11:06:54 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:06:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:06:54 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:06:54 2012] Source does appear to be extended
[Tue Mar 13 11:06:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:08:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:08:06 2012] Initial guess for spatial extent in simple fitting = 5.75"
[Tue Mar 13 11:08:06 2012] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.678
[Tue Mar 13 11:08:06 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 5.75"
[Tue Mar 13 11:08:07 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_src5.ximg exists
[Tue Mar 13 11:08:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_src5.csv
[Tue Mar 13 11:08:07 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Mar 13 11:08:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_src5.csv
[Tue Mar 13 11:08:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:08:10 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Mar 13 11:08:10 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Mar 13 11:08:10 2012] Fit fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Mar 13 11:08:56 2012] Spatial fit model total counts = 222.998000, observed total counts = 223.000000
[Tue Mar 13 11:08:56 2012] Offset between fit and detection position for source 23 = 0.009295 pixels
[Tue Mar 13 11:08:56 2012] 215.059500 total counts/ 119.820000 bgd. counts: snr = 8.700665
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.009295 pixels
  Position = (367.4, 345.4) = 5 7 18.39 -37 29 4.9
  Extent = 5.7 (4.8-6.9)", rotation angle = 0
  Source counts = 95.2 +/- 14.7
  Background counts = 119.8
  Rate = 0.002 +/- 0.0004
[Tue Mar 13 11:08:56 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:08:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:08:56 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:08:56 2012] Source does appear to be extended
[Tue Mar 13 11:08:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:10:14 2012] XMMSAS src. selection expression = ellipse(31915.498200, 30002.420400, 341.251810, 341.251810, 0.000000, X, Y)
[Tue Mar 13 11:10:14 2012] Not overwriting source region fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src23_src.reg
[Tue Mar 13 11:10:14 2012] Extracting stamp from image fullrun_mos1_xmm0110980801_pi300-10000_cl_sm2.00.img.gz, (348, 326) - (387, 365)
[Tue Mar 13 11:10:14 2012] XMMSAS bgd. selection expression = annulus(31915.498200, 30002.420400, 568.753016, 1137.506033, X, Y) && !ellipse(30843.418820, 31172.437000, 389.821611, 389.821611, 0.000000, X, Y) && !ellipse(32835.445480, 31176.219200, 467.704813, 467.704813, 0.000000, X, Y) && !ellipse(32956.782454, 28775.147526, 555.864783, 238.593707, 238.219939, X, Y) && !ellipse(30143.261230, 30403.414276, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 13 11:10:14 2012] Writing fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src23.gif
[Tue Mar 13 11:10:15 2012] ../../xmm0110980801/products/events/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src23_src.evt and ../../xmm0110980801/products/events/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src23_bgd.evt exist, delete to re-create
[Tue Mar 13 11:10:15 2012] Mean detx,y = (-118.29, 5770.61) 
[Tue Mar 13 11:10:15 2012] ../../xmm0110980801/products/images/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src23_src.img and ../../xmm0110980801/products/images/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src23_bgd.img exist, delete to re-create
[Tue Mar 13 11:10:15 2012] ../../xmm0110980801/products/spectra/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src23_src_b10.pi.gz and ../../xmm0110980801/products/spectra/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src23_bgd.pi exist, delete to re-create
[Tue Mar 13 11:10:15 2012] Setting source spectrum file to fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Tue Mar 13 11:10:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Tue Mar 13 11:10:15 2012] ../../xmm0110980801/products/lightcurves/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src23_src.lc and ../../xmm0110980801/products/lightcurves/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src23_bgd.lc exist, delete to re-create
[Tue Mar 13 11:10:28 2012] Not generating rmf since there are only 95 counts
[Tue Mar 13 11:10:28 2012] rmf not generated due to insufficient counts
[Tue Mar 13 11:10:28 2012] fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src23.arf exists, delete to re-create
[Tue Mar 13 11:11:50 2012] Updating aperture counts using extracted products
[Tue Mar 13 11:11:50 2012] Error reading totcts from fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Tue Mar 13 11:11:52 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:11:52 2012] Using photon index=1.80, rate=0.00238, arf fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src23.arf
[Tue Mar 13 11:11:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 11:11:52 2012] Updating source flux to 3.3e-14
[Tue Mar 13 11:12:07 2012] Source 23 has fewer than 100.000000 counts, skipping spectral fitting