[Tue Mar 13 11:04:59 2012] Detection parameters:
  Position = (269.2, 367.9) = 5 7 54.27 -37 27 27.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.3 +/- 11.4
  Background counts = 12.1
  Rate = 0.002 +/- 0.0003

[Tue Mar 13 11:05:00 2012] Off-axis axis estimate = 5.47'
[Tue Mar 13 11:06:11 2012] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:06:11 2012] Initial guess for spatial extent in simple fitting = 9.16"
[Tue Mar 13 11:06:11 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.104
[Tue Mar 13 11:06:11 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 9.16"
[Tue Mar 13 11:06:11 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_src13.ximg exists
[Tue Mar 13 11:06:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_src13.csv
[Tue Mar 13 11:06:11 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue Mar 13 11:06:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_src13.csv
[Tue Mar 13 11:06:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:06:12 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue Mar 13 11:06:12 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Mar 13 11:06:12 2012] Fit fullrun_mos1_xmm0110980801_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Tue Mar 13 11:06:54 2012] Source 18 is offset by 4.035668 and -7.206537 pixels which is larger than
2 X fitted extent = 1.108097 x 1.108097, not incorporating fit results
[Tue Mar 13 11:06:54 2012] Spatial fit model total counts = 198.484000, observed total counts = 197.000000
[Tue Mar 13 11:06:54 2012] Offset between fit and detection position for source 18 = 0.132018 pixels
[Tue Mar 13 11:06:54 2012] 197.035700 total counts/ 148.622000 bgd. counts: snr = 3.971245
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.132018 pixels
  Position = (269.1, 367.9) = 5 7 54.32 -37 27 27.2
  Extent = 5.6 (4.3-8.1)", rotation angle = 0
  Source counts = 48.4 +/- 14.0
  Background counts = 148.6
  Rate = 0.001 +/- 0.0004
[Tue Mar 13 11:06:54 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:06:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:06:54 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:06:54 2012] Source does appear to be extended
[Tue Mar 13 11:06:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:08:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:08:06 2012] Initial guess for spatial extent in simple fitting = 5.65"
[Tue Mar 13 11:08:06 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.237
[Tue Mar 13 11:08:06 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 5.65"
[Tue Mar 13 11:08:07 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_src13.ximg exists
[Tue Mar 13 11:08:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_src13.csv
[Tue Mar 13 11:08:07 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue Mar 13 11:08:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_src13.csv
[Tue Mar 13 11:08:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:08:11 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue Mar 13 11:08:11 2012] fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Mar 13 11:08:11 2012] Fit fullrun_mos1_xmm0110980801_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Tue Mar 13 11:08:56 2012] Spatial fit model total counts = 198.506000, observed total counts = 197.000000
[Tue Mar 13 11:08:56 2012] Offset between fit and detection position for source 18 = 0.003526 pixels
[Tue Mar 13 11:08:56 2012] 197.058800 total counts/ 148.842000 bgd. counts: snr = 3.952170
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.003526 pixels
  Position = (269.1, 367.9) = 5 7 54.32 -37 27 27.2
  Extent = 5.6 (4.3-8.1)", rotation angle = 0
  Source counts = 48.2 +/- 14.0
  Background counts = 148.8
  Rate = 0.001 +/- 0.0004
[Tue Mar 13 11:08:56 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:08:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:08:56 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:08:56 2012] Source does appear to be extended
[Tue Mar 13 11:08:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:10:14 2012] XMMSAS src. selection expression = ellipse(23360.068780, 31958.909400, 336.076210, 336.076210, 0.000000, X, Y)
[Tue Mar 13 11:10:14 2012] Not overwriting source region fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src18_src.reg
[Tue Mar 13 11:10:14 2012] Extracting stamp from image fullrun_mos1_xmm0110980801_pi300-10000_cl_sm2.00.img.gz, (250, 349) - (288, 387)
[Tue Mar 13 11:10:14 2012] XMMSAS bgd. selection expression = annulus(23360.068780, 31958.909400, 560.127016, 1120.254032, X, Y) && !ellipse(23643.908400, 33333.541200, 362.645610, 362.645610, 0.000000, X, Y)
[Tue Mar 13 11:10:14 2012] Writing fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src18.gif
[Tue Mar 13 11:10:15 2012] ../../xmm0110980801/products/events/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src18_src.evt and ../../xmm0110980801/products/events/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src18_bgd.evt exist, delete to re-create
[Tue Mar 13 11:10:15 2012] Mean detx,y = (5153.18, -1235.62) 
[Tue Mar 13 11:10:15 2012] ../../xmm0110980801/products/images/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src18_src.img and ../../xmm0110980801/products/images/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src18_bgd.img exist, delete to re-create
[Tue Mar 13 11:10:15 2012] ../../xmm0110980801/products/spectra/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src18_src_b10.pi.gz and ../../xmm0110980801/products/spectra/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src18_bgd.pi exist, delete to re-create
[Tue Mar 13 11:10:15 2012] Setting source spectrum file to fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue Mar 13 11:10:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Tue Mar 13 11:10:15 2012] ../../xmm0110980801/products/lightcurves/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src18_src.lc and ../../xmm0110980801/products/lightcurves/fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src18_bgd.lc exist, delete to re-create
[Tue Mar 13 11:10:28 2012] Not generating rmf since there are only 48 counts
[Tue Mar 13 11:10:28 2012] rmf not generated due to insufficient counts
[Tue Mar 13 11:10:28 2012] fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src18.arf exists, delete to re-create
[Tue Mar 13 11:11:50 2012] Updating aperture counts using extracted products
[Tue Mar 13 11:11:51 2012] Error reading totcts from fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue Mar 13 11:11:53 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:11:53 2012] Using photon index=1.80, rate=0.00121, arf fullrun_mos1_xmm0110980801_pi300-10000_pass1_cl_src18.arf
[Tue Mar 13 11:11:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 11:11:53 2012] Updating source flux to 1.8e-14
[Tue Mar 13 11:12:07 2012] Flag b found in src. 18 procflags, skipping spectral fitting
[Tue Mar 13 11:12:07 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting