[Fri Oct 14 10:22:32 2011] Detection parameters:
  Position = (304.2, 321.0) = 12 45 8.62 -0 27 39.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3186.3 +/- 69.6
  Background counts = 70.6
  Rate = 0.07 +/- 0.001

[Fri Oct 14 10:22:38 2011] Off-axis axis estimate = 1.69'
[Fri Oct 14 10:27:22 2011] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 10:27:22 2011] Initial guess for spatial extent in simple fitting = 7.27"
[Fri Oct 14 10:27:22 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Fri Oct 14 10:27:22 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 7.27"
[Fri Oct 14 14:00:40 2011] fullrun_pn_xmm0110980201_pi300-10000_cl_pass0_src2.ximg exists
[Fri Oct 14 14:00:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110980201_pi300-10000_cl_pass0_src2.csv
[Fri Oct 14 14:00:40 2011] fullrun_pn_xmm0110980201_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Oct 14 14:00:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110980201_pi300-10000_cl_pass0_src2.csv
[Fri Oct 14 14:00:40 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110980201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110980201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 14:00:41 2011] fullrun_pn_xmm0110980201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Oct 14 14:00:41 2011] fullrun_pn_xmm0110980201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Oct 14 14:00:41 2011] Fit fullrun_pn_xmm0110980201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Oct 14 18:42:27 2011] Spatial fit model total counts = 7560.320000, observed total counts = 7569.000000
[Fri Oct 14 18:42:27 2011] Offset between fit and detection position for source 2 = 0.359664 pixels
[Fri Oct 14 18:42:27 2011] 7345.380000 total counts/ 3582.330000 bgd. counts: snr = 62.871988
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.359664 pixels
  Position = (304.0, 321.2) = 12 45 8.70 -0 27 38.9
  Extent = 13.1 (12.3-14.1)", rotation angle = 0
  Source counts = 3763.1 +/- 85.7
  Background counts = 3582.3
  Rate = 0.07 +/- 0.002
[Fri Oct 14 18:42:27 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 18:42:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 18:42:27 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 18:42:27 2011] Source does appear to be extended
[Fri Oct 14 18:42:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 18:43:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 18:43:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 18:43:27 2011] Initial guess for spatial extent in simple fitting = 13.10"
[Fri Oct 14 18:43:27 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.994
[Fri Oct 14 18:43:27 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 13.10"
[Fri Oct 14 22:37:46 2011] fullrun_pn_xmm0110980201_pi300-10000_cl_pass1_src2.ximg exists
[Fri Oct 14 22:37:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110980201_pi300-10000_cl_pass1_src2.csv
[Fri Oct 14 22:37:46 2011] fullrun_pn_xmm0110980201_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Oct 14 22:37:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110980201_pi300-10000_cl_pass1_src2.csv
[Fri Oct 14 22:37:46 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110980201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110980201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 22:37:47 2011] fullrun_pn_xmm0110980201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Oct 14 22:37:47 2011] fullrun_pn_xmm0110980201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Oct 14 22:37:47 2011] Fit fullrun_pn_xmm0110980201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Oct 15 03:10:22 2011] Warning, spatial fit 2 centroid is now closest to src. 37
[Sat Oct 15 03:10:22 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 03:10:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 03:10:22 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 03:10:22 2011] Source does appear to be extended
[Sat Oct 15 03:10:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 03:11:21 2011] Counts = 3763.050000, rescaling region sizes by 2.000000
[Sat Oct 15 03:11:21 2011] XMMSAS src. selection expression = ellipse(26396.762060, 27897.668040, 1571.820045, 1571.820045, 0.000000, X, Y)
[Sat Oct 15 03:11:21 2011] Writing source region out to fullrun_pn_xmm0110980201_pi300-10000_pass1_cl_src2_src.reg
[Sat Oct 15 03:11:21 2011] Extracting stamp from image fullrun_pn_xmm0110980201_pi300-10000_cl_sm2.00.img.gz, (214, 231) - (394, 412)
[Sat Oct 15 03:11:21 2011] XMMSAS bgd. selection expression = annulus(26396.762060, 27897.668040, 5239.400151, 10478.800302, X, Y) && !ellipse(16687.556800, 27753.452800, 497.552814, 497.552814, 0.000000, X, Y) && !ellipse(24187.398621, 38255.759003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25561.786800, 38274.973000, 409.696012, 359.296810, -0.000000, X, Y) && !ellipse(32150.373220, 37236.277200, 918.256026, 918.256026, 0.000000, X, Y) && !ellipse(27085.612671, 36588.905060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23804.165420, 35801.663200, 404.226412, 404.226412, 0.000000, X, Y) && !ellipse(28996.734619, 35472.993591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30827.309756, 35393.367225, 450.922784, 370.373398, 37.845047, X, Y) && !ellipse(22781.571228, 35262.853333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31183.897308, 34754.271851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35316.811493, 34149.742920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23461.585800, 33538.823800, 456.719213, 456.719213, 0.000000, X, Y) && !ellipse(36045.836262, 31953.441658, 868.168025, 400.875743, 66.440768, X, Y) && !ellipse(24684.653200, 32004.811200, 491.349614, 491.349614, 0.000000, X, Y) && !ellipse(21000.734934, 30759.949062, 580.665733, 302.558091, 116.292071, X, Y) && !ellipse(34770.317166, 30799.484102, 539.203086, 400.182030, 67.564092, X, Y) && !ellipse(25211.811127, 29051.405005, 1409.336041, 920.674869, 0.000000, X, Y) && !ellipse(30402.291400, 28950.159600, 1449.904042, 1449.904042, 0.000000, X, Y) && !ellipse(27675.460000, 28410.312200, 328.892009, 328.892009, 0.000000, X, Y) && !ellipse(27127.850000, 27063.150000, 1153.296033, 1153.296033, 0.000000, X, Y) && !ellipse(25239.369019, 27876.551208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25882.478180, 27109.531830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31521.424236, 27183.156268, 504.137893, 418.680838, 251.680131, X, Y) && !ellipse(36940.168760, 26604.315000, 510.928015, 254.367207, 129.904699, X, Y) && !ellipse(19630.626820, 26352.417800, 527.706415, 527.706415, 0.000000, X, Y) && !ellipse(27726.532000, 26414.346400, 378.147211, 378.147211, 0.000000, X, Y) && !ellipse(29067.453400, 26049.483600, 439.055213, 354.300810, 317.617219, X, Y) && !ellipse(20354.679400, 25772.437800, 450.008813, 450.008813, 0.000000, X, Y) && !ellipse(29735.604800, 25504.262800, 429.316812, 429.316812, 0.000000, X, Y) && !ellipse(33281.558347, 25425.080841, 580.133557, 430.939165, 174.660126, X, Y) && !ellipse(18751.725281, 25084.811798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21926.274780, 24942.565948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37441.203979, 24747.506256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35436.229401, 23349.426239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23513.406158, 23366.283020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27284.088060, 22968.955600, 329.232809, 329.232809, 0.000000, X, Y) && !ellipse(23045.145800, 22925.725800, 297.960809, 297.960809, 0.000000, X, Y) && !ellipse(25205.210000, 22380.799600, 425.333612, 425.333612, 0.000000, X, Y) && !ellipse(19359.608000, 22580.803000, 677.944820, 677.944820, 0.000000, X, Y) && !ellipse(28122.425507, 21864.631638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37486.034149, 21615.458466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32108.876200, 21102.785400, 706.832020, 706.832020, 0.000000, X, Y) && !ellipse(25642.272400, 20795.923000, 598.818417, 598.818417, 0.000000, X, Y) && !ellipse(18944.416687, 20310.052246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28459.542542, 20026.358383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22918.674286, 19345.729675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18323.511536, 18699.912384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34614.415527, 18596.196320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18087.618000, 18591.966600, 1733.768050, 833.352024, 346.938400, X, Y) && !ellipse(36701.202179, 16823.301834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36202.474000, 16557.277800, 864.168025, 447.391213, 339.080737, X, Y)
[Sat Oct 15 03:11:21 2011] Writing fullrun_pn_xmm0110980201_pi300-10000_pass1_cl_src2.gif
[Sat Oct 15 03:14:24 2011] Mean detx,y = (239.16, 38.02) 
[Sat Oct 15 03:14:32 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Oct 15 03:19:17 2011] Binned source spectrum to 10 counts/bin
[Sat Oct 15 03:19:18 2011] Setting source spectrum file to fullrun_pn_xmm0110980201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Oct 15 03:19:18 2011] Setting bgd. spectrum file to fullrun_pn_xmm0110980201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Oct 15 10:28:14 2011] Updating aperture counts using extracted products
[Sat Oct 15 10:28:14 2011] Error reading totcts from fullrun_pn_xmm0110980201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Oct 15 10:28:19 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 10:28:19 2011] Using photon index=1.80, rate=0.0692, arf fullrun_pn_xmm0110980201_pi300-10000_pass1_cl_src2.arf
[Sat Oct 15 10:28:19 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Oct 15 10:28:19 2011] Updating source flux to 1.5e-13