[Fri Oct 14 10:22:51 2011] Detection parameters:
  Position = (439.3, 229.0) = 12 44 29.45 -0 34 20.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157.8 +/- 15.9
  Background counts = 13.8
  Rate = 0.003 +/- 0.0003

[Fri Oct 14 10:22:52 2011] Off-axis axis estimate = 11.38'
[Fri Oct 14 16:17:07 2011] Using EEF radius (= 12.12 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 16:17:07 2011] Initial guess for spatial extent in simple fitting = 12.12"
[Fri Oct 14 16:17:07 2011] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.972
[Fri Oct 14 16:17:07 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 12.12"
[Fri Oct 14 18:42:01 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_src23.ximg exists
[Fri Oct 14 18:42:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_src23.csv
[Fri Oct 14 18:42:01 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_src23_1.ximg exists
[Fri Oct 14 18:42:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_src23.csv
[Fri Oct 14 18:42:01 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 18:42:03 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Fri Oct 14 18:42:03 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Oct 14 18:42:03 2011] Fit fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Fri Oct 14 18:42:57 2011] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 56 at 10.896069 pixels away
[Fri Oct 14 18:42:57 2011] Source 56 is offset by -2.378524 and -8.345841 pixels which is larger than
2 X fitted extent = 1.331936 x 1.331936, not incorporating fit results
[Fri Oct 14 18:42:57 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 18:42:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 18:42:57 2011] Assessing source extent using major
[Fri Oct 14 18:42:57 2011] Source does appear to be extended
[Fri Oct 14 18:42:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 00:41:43 2011] Using EEF radius (= 12.12 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 00:41:43 2011] Initial guess for spatial extent in simple fitting = 12.12"
[Sat Oct 15 00:41:43 2011] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.972
[Sat Oct 15 00:41:43 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 12.12"
[Sat Oct 15 03:09:59 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_src23.ximg exists
[Sat Oct 15 03:09:59 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_src23_1.ximg exists
[Sat Oct 15 03:09:59 2011] Fit fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_src23 appears to have run properly
[Sat Oct 15 03:10:00 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sat Oct 15 03:10:00 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sat Oct 15 03:10:00 2011] Fit fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Sat Oct 15 03:10:51 2011] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 56 at 15.593554 pixels away
[Sat Oct 15 03:10:51 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 03:10:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 03:10:51 2011] Assessing source extent using major
[Sat Oct 15 03:10:51 2011] Source does appear to be extended
[Sat Oct 15 03:10:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 09:27:16 2011] XMMSAS src. selection expression = ellipse(38168.594391, 19874.385834, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Oct 15 09:27:16 2011] Writing source region out to fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src56_src.reg
[Sat Oct 15 09:27:16 2011] Extracting stamp from image fullrun_mos2_xmm0110980201_pi300-10000_cl_sm2.00.img.gz, (402, 191) - (477, 266)
[Sat Oct 15 09:27:16 2011] XMMSAS bgd. selection expression = annulus(38168.594391, 19874.385834, 1087.500000, 2175.000000, X, Y) && !ellipse(37491.535370, 21520.700470, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Oct 15 09:27:16 2011] Writing fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src56.gif
[Sat Oct 15 09:33:21 2011] Mean detx,y = (-7684.90, -11972.55) 
[Sat Oct 15 09:33:22 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Oct 15 09:33:31 2011] Binned source spectrum to 10 counts/bin
[Sat Oct 15 09:33:31 2011] Setting source spectrum file to fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Sat Oct 15 09:33:31 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Sat Oct 15 10:16:02 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Oct 15 10:16:02 2011] rmf not generated due to insufficient counts
[Sat Oct 15 10:28:32 2011] Updating aperture counts using extracted products
[Sat Oct 15 10:28:32 2011] Error reading totcts from fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Sat Oct 15 10:28:35 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 10:28:35 2011] Using photon index=1.80, rate=0.00273, arf fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src56.arf
[Sat Oct 15 10:28:35 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Oct 15 10:28:35 2011] Updating source flux to 5.6e-14
[Sat Oct 15 10:31:04 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting