[Fri Oct 14 10:22:51 2011] Detection parameters:
  Position = (151.1, 236.1) = 12 45 53.03 -0 33 49.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.1 +/- 10.2
  Background counts = 12.5
  Rate = 0.0009 +/- 0.0002

[Fri Oct 14 10:22:52 2011] Off-axis axis estimate = 11.60'
[Fri Oct 14 16:17:07 2011] Using EEF radius (= 12.23 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 16:17:07 2011] Initial guess for spatial extent in simple fitting = 12.23"
[Fri Oct 14 16:17:07 2011] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.821
[Fri Oct 14 16:17:07 2011] Giving source the simple spatial ID 51 for pass 0, mean size = 12.23"
[Fri Oct 14 18:42:02 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_src51.ximg exists
[Fri Oct 14 18:42:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_src51.csv
[Fri Oct 14 18:42:02 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_src51_1.ximg exists
[Fri Oct 14 18:42:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_src51.csv
[Fri Oct 14 18:42:02 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 18:42:03 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Fri Oct 14 18:42:03 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Fri Oct 14 18:42:03 2011] Fit fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Fri Oct 14 18:42:57 2011] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 14.434966 pixels away
[Fri Oct 14 18:42:57 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 18:42:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 18:42:57 2011] Assessing source extent using major
[Fri Oct 14 18:42:57 2011] Source does appear to be extended
[Fri Oct 14 18:42:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 00:41:43 2011] Using EEF radius (= 12.23 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 00:41:43 2011] Initial guess for spatial extent in simple fitting = 12.23"
[Sat Oct 15 00:41:43 2011] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.821
[Sat Oct 15 00:41:43 2011] Giving source the simple spatial ID 49 for pass 1, mean size = 12.23"
[Sat Oct 15 03:09:59 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_src49.ximg exists
[Sat Oct 15 03:09:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_src49.csv
[Sat Oct 15 03:09:59 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_src49_1.ximg exists
[Sat Oct 15 03:09:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_src49.csv
[Sat Oct 15 03:09:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 03:10:00 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Sat Oct 15 03:10:00 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Sat Oct 15 03:10:00 2011] Fit fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Sat Oct 15 03:10:51 2011] Spatial fit model total counts = 191.983000, observed total counts = 192.000000
[Sat Oct 15 03:10:51 2011] Offset between fit and detection position for source 52 = 0.226251 pixels
[Sat Oct 15 03:10:51 2011] 183.944200 total counts/ 150.687000 bgd. counts: snr = 2.709242
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.226251 pixels
  Position = (151.3, 236.1) = 12 45 52.97 -0 33 48.9
  Extent = 4.6 (3.2-6.3)", rotation angle = 0
  Source counts = 33.3 +/- 13.6
  Background counts = 150.7
  Rate = 0.0006 +/- 0.0002
[Sat Oct 15 03:10:51 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 03:10:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 03:10:51 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 03:10:51 2011] Source does appear to be extended
[Sat Oct 15 03:10:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 09:27:16 2011] XMMSAS src. selection expression = ellipse(13115.113600, 20496.387600, 277.263608, 277.263608, 0.000000, X, Y)
[Sat Oct 15 09:27:16 2011] Writing source region out to fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src52_src.reg
[Sat Oct 15 09:27:16 2011] Extracting stamp from image fullrun_mos2_xmm0110980201_pi300-10000_cl_sm2.00.img.gz, (135, 220) - (167, 252)
[Sat Oct 15 09:27:16 2011] XMMSAS bgd. selection expression = annulus(13115.113600, 20496.387600, 462.106013, 924.212027, X, Y) && !ellipse(12212.963340, 20497.865600, 387.654411, 387.654411, 0.000000, X, Y)
[Sat Oct 15 09:27:16 2011] Writing fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src52.gif
[Sat Oct 15 09:40:20 2011] Mean detx,y = (15082.42, -1609.79) 
[Sat Oct 15 09:40:21 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Oct 15 09:40:27 2011] Binned source spectrum to 10 counts/bin
[Sat Oct 15 09:40:28 2011] Setting source spectrum file to fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Sat Oct 15 09:40:28 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Sat Oct 15 10:26:16 2011] Not generating rmf since there are only 33 counts
[Sat Oct 15 10:26:16 2011] rmf not generated due to insufficient counts
[Sat Oct 15 10:28:33 2011] Updating aperture counts using extracted products
[Sat Oct 15 10:28:33 2011] Error reading totcts from fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Sat Oct 15 10:28:36 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 10:28:36 2011] Using photon index=1.80, rate=0.000575, arf fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src52.arf
[Sat Oct 15 10:28:36 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Oct 15 10:28:36 2011] Updating source flux to 2.2e-14
[Sat Oct 15 10:31:04 2011] Source 52 has fewer than 100.000000 counts, skipping spectral fitting