[Fri Oct 14 10:22:50 2011] Detection parameters:
  Position = (234.3, 297.0) = 12 45 28.89 -0 29 25.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.9 +/- 9.6
  Background counts = 17.6
  Rate = 0.001 +/- 0.0003

[Fri Oct 14 10:22:52 2011] Off-axis axis estimate = 4.65'
[Fri Oct 14 16:17:07 2011] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 16:17:07 2011] Initial guess for spatial extent in simple fitting = 8.75"
[Fri Oct 14 16:17:07 2011] source mask rpix=2.0, npix_max = 25, mask sum = 15, frac = 0.594
[Fri Oct 14 16:17:07 2011] Giving source the simple spatial ID 43 for pass 0, mean size = 8.75"
[Fri Oct 14 18:42:02 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_src43.ximg exists
[Fri Oct 14 18:42:02 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_src43.csv
[Fri Oct 14 18:42:02 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_src43_1.ximg exists
[Fri Oct 14 18:42:02 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_src43.csv
[Fri Oct 14 18:42:02 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 18:42:03 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Fri Oct 14 18:42:03 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Fri Oct 14 18:42:03 2011] Fit fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Fri Oct 14 18:42:57 2011] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 10.500214 pixels away
[Fri Oct 14 18:42:57 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 18:42:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 18:42:57 2011] Assessing source extent using major
[Fri Oct 14 18:42:57 2011] Source does appear to be extended
[Fri Oct 14 18:42:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 00:41:43 2011] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 00:41:43 2011] Initial guess for spatial extent in simple fitting = 8.75"
[Sat Oct 15 00:41:43 2011] source mask rpix=2.0, npix_max = 25, mask sum = 15, frac = 0.594
[Sat Oct 15 00:41:43 2011] Giving source the simple spatial ID 41 for pass 1, mean size = 8.75"
[Sat Oct 15 03:09:59 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_src41.ximg exists
[Sat Oct 15 03:09:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_src41.csv
[Sat Oct 15 03:09:59 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_src41_1.ximg exists
[Sat Oct 15 03:09:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_src41.csv
[Sat Oct 15 03:09:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 03:10:00 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Sat Oct 15 03:10:00 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Sat Oct 15 03:10:00 2011] Fit fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Sat Oct 15 03:10:51 2011] Warning: source 41 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 10.486050 pixels away
[Sat Oct 15 03:10:51 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 03:10:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 03:10:51 2011] Assessing source extent using major
[Sat Oct 15 03:10:51 2011] Source does appear to be extended
[Sat Oct 15 03:10:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 09:27:16 2011] XMMSAS src. selection expression = ellipse(20339.269516, 25787.276794, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Oct 15 09:27:16 2011] Writing source region out to fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src36_src.reg
[Sat Oct 15 09:27:16 2011] Extracting stamp from image fullrun_mos2_xmm0110980201_pi300-10000_cl_sm2.00.img.gz, (197, 259) - (272, 334)
[Sat Oct 15 09:27:16 2011] XMMSAS bgd. selection expression = annulus(20339.269516, 25787.276794, 1087.500000, 2175.000000, X, Y) && !ellipse(18748.482400, 25126.957000, 448.425613, 246.223207, 108.286774, X, Y) && !ellipse(21913.399000, 24983.376800, 367.819211, 367.819211, 0.000000, X, Y)
[Sat Oct 15 09:27:16 2011] Writing fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src36.gif
[Sat Oct 15 09:37:45 2011] Mean detx,y = (6343.31, 423.71) 
[Sat Oct 15 09:37:46 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Oct 15 09:38:07 2011] Binned source spectrum to 10 counts/bin
[Sat Oct 15 09:38:08 2011] Setting source spectrum file to fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sat Oct 15 09:38:08 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Sat Oct 15 10:17:04 2011] Not generating rmf since there are only 52 counts
[Sat Oct 15 10:17:04 2011] rmf not generated due to insufficient counts
[Sat Oct 15 10:28:33 2011] Updating aperture counts using extracted products
[Sat Oct 15 10:28:33 2011] Error reading totcts from fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sat Oct 15 10:28:35 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 10:28:35 2011] Using photon index=1.80, rate=0.00138, arf fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src36.arf
[Sat Oct 15 10:28:35 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Oct 15 10:28:35 2011] Updating source flux to 2.1e-14
[Sat Oct 15 10:31:04 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting