[Fri Oct 14 10:22:49 2011] Detection parameters:
  Position = (298.9, 312.9) = 12 45 10.15 -0 28 17.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.9 +/- 14.1
  Background counts = 19.8
  Rate = 0.001 +/- 0.0002

[Fri Oct 14 10:22:52 2011] Off-axis axis estimate = 1.05'
[Fri Oct 14 16:17:07 2011] Using EEF radius (= 6.95 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 16:17:07 2011] Initial guess for spatial extent in simple fitting = 6.95"
[Fri Oct 14 16:17:07 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.908
[Fri Oct 14 16:17:07 2011] Giving source the simple spatial ID 38 for pass 0, mean size = 6.95"
[Fri Oct 14 18:42:02 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_src38.ximg exists
[Fri Oct 14 18:42:02 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_src38_1.ximg exists
[Fri Oct 14 18:42:02 2011] Fit fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_src38 appears to have run properly
[Fri Oct 14 18:42:03 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Fri Oct 14 18:42:03 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Fri Oct 14 18:42:03 2011] Fit fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Fri Oct 14 18:42:57 2011] Spatial fit model total counts = 1268.150000, observed total counts = 1269.000000
[Fri Oct 14 18:42:57 2011] Offset between fit and detection position for source 30 = 6.794662 pixels
[Fri Oct 14 18:42:57 2011] 835.222100 total counts/ 759.620000 bgd. counts: snr = 2.743062
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 6.794662 pixels
  Position = (293.5, 308.8) = 12 45 11.72 -0 28 33.0
  Extent = 13.9 (13.9-27.8)", rotation angle = 0
  Source counts = 75.6 +/- 28.9
  Background counts = 759.6
  Rate = 0.001 +/- 0.0005
[Fri Oct 14 18:42:57 2011] Spatial fit model total counts = -7.505680, observed total counts = 731.000000
[Fri Oct 14 18:42:57 2011] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Oct 14 18:42:57 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 18:42:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 18:42:57 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 18:42:57 2011] Source does appear to be extended
[Fri Oct 14 18:42:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 00:41:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 00:41:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 00:41:43 2011] Initial guess for spatial extent in simple fitting = 13.91"
[Sat Oct 15 00:41:43 2011] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.896
[Sat Oct 15 00:41:43 2011] Giving source the simple spatial ID 37 for pass 1, mean size = 13.91"
[Sat Oct 15 03:09:59 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_src37.ximg exists
[Sat Oct 15 03:09:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_src37.csv
[Sat Oct 15 03:09:59 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_src37_1.ximg exists
[Sat Oct 15 03:09:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_src37.csv
[Sat Oct 15 03:09:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 03:10:00 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Sat Oct 15 03:10:00 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Sat Oct 15 03:10:00 2011] Fit fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Sat Oct 15 03:10:51 2011] Warning, spatial fit 37 centroid is now closest to src. 25
[Sat Oct 15 03:10:51 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 03:10:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 03:10:51 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 03:10:51 2011] Source does appear to be extended
[Sat Oct 15 03:10:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 09:27:16 2011] XMMSAS src. selection expression = ellipse(25490.082000, 26814.968000, 834.456024, 834.456024, 0.000000, X, Y)
[Sat Oct 15 09:27:16 2011] Writing source region out to fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src30_src.reg
[Sat Oct 15 09:27:16 2011] Extracting stamp from image fullrun_mos2_xmm0110980201_pi300-10000_cl_sm2.00.img.gz, (246, 261) - (342, 357)
[Sat Oct 15 09:27:16 2011] XMMSAS bgd. selection expression = annulus(25490.082000, 26814.968000, 1390.760040, 2781.520080, X, Y) && !ellipse(26677.354000, 27450.948000, 702.179220, 702.179220, 0.000000, X, Y) && !ellipse(27023.958000, 27051.972000, 353.601610, 353.601610, 0.000000, X, Y) && !ellipse(27639.752200, 27199.860400, 716.101621, 716.101621, 0.000000, X, Y) && !ellipse(27731.459167, 26436.991669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25234.515625, 27892.534485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26421.410000, 27883.164000, 1200.144035, 639.274418, 48.854000, X, Y) && !ellipse(26401.138153, 26599.245819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27375.393188, 26391.665009, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Oct 15 09:27:16 2011] Writing fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src30.gif
[Sat Oct 15 09:36:49 2011] Mean detx,y = (1067.71, -634.87) 
[Sat Oct 15 09:36:50 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Oct 15 09:37:00 2011] Binned source spectrum to 10 counts/bin
[Sat Oct 15 09:37:00 2011] Setting source spectrum file to fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat Oct 15 09:37:00 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sat Oct 15 10:16:48 2011] Not generating rmf since there are only 75 counts
[Sat Oct 15 10:16:48 2011] rmf not generated due to insufficient counts
[Sat Oct 15 10:28:32 2011] Updating aperture counts using extracted products
[Sat Oct 15 10:28:32 2011] Error reading totcts from fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sat Oct 15 10:28:35 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 10:28:35 2011] Using photon index=1.80, rate=0.00131, arf fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src30.arf
[Sat Oct 15 10:28:35 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Oct 15 10:28:35 2011] Updating source flux to 1.3e-14
[Sat Oct 15 10:31:04 2011] Flag p found in src. 30 procflags, skipping spectral fitting
[Sat Oct 15 10:31:04 2011] Source 30 has fewer than 100.000000 counts, skipping spectral fitting