[Fri Oct 14 10:22:48 2011] Detection parameters:
  Position = (334.0, 408.3) = 12 44 59.98 -0 21 19.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 310.8 +/- 22.2
  Background counts = 18.8
  Rate = 0.008 +/- 0.0006

[Fri Oct 14 10:22:52 2011] Off-axis axis estimate = 8.37'
[Fri Oct 14 16:17:07 2011] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 16:17:07 2011] Initial guess for spatial extent in simple fitting = 10.62"
[Fri Oct 14 16:17:07 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.041
[Fri Oct 14 16:17:07 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 10.62"
[Fri Oct 14 18:42:01 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_src6.ximg exists
[Fri Oct 14 18:42:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_src6.csv
[Fri Oct 14 18:42:01 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Oct 14 18:42:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_src6.csv
[Fri Oct 14 18:42:01 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 18:42:02 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Oct 14 18:42:02 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Oct 14 18:42:02 2011] Fit fullrun_mos2_xmm0110980201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Oct 14 18:42:57 2011] Warning, spatial fit 6 centroid is now closest to src. 10
[Fri Oct 14 18:42:57 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 18:42:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 18:42:57 2011] Assessing source extent using major
[Fri Oct 14 18:42:57 2011] Source does appear to be extended
[Fri Oct 14 18:42:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 00:41:43 2011] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 00:41:43 2011] Initial guess for spatial extent in simple fitting = 10.62"
[Sat Oct 15 00:41:43 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.041
[Sat Oct 15 00:41:43 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 10.62"
[Sat Oct 15 03:09:59 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_src6.ximg exists
[Sat Oct 15 03:09:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_src6.csv
[Sat Oct 15 03:09:59 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Oct 15 03:09:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_src6.csv
[Sat Oct 15 03:09:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 03:10:00 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Oct 15 03:10:00 2011] fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Oct 15 03:10:00 2011] Fit fullrun_mos2_xmm0110980201_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sat Oct 15 03:10:51 2011] Spatial fit model total counts = 385.000000, observed total counts = 385.000000
[Sat Oct 15 03:10:51 2011] Offset between fit and detection position for source 13 = 0.394155 pixels
[Sat Oct 15 03:10:51 2011] 384.267000 total counts/ 165.195000 bgd. counts: snr = 17.044663
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.394155 pixels
  Position = (333.6, 408.4) = 12 45 0.09 -0 21 19.5
  Extent = 5.2 (4.6-5.8)", rotation angle = 0
  Source counts = 219.1 +/- 19.6
  Background counts = 165.2
  Rate = 0.004 +/- 0.0003
[Sat Oct 15 03:10:51 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 03:10:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 03:10:51 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 03:10:51 2011] Source does appear to be extended
[Sat Oct 15 03:10:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 09:27:15 2011] XMMSAS src. selection expression = ellipse(28977.123600, 35485.431800, 312.344409, 312.344409, 0.000000, X, Y)
[Sat Oct 15 09:27:15 2011] Writing source region out to fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src13_src.reg
[Sat Oct 15 09:27:15 2011] Extracting stamp from image fullrun_mos2_xmm0110980201_pi300-10000_cl_sm2.00.img.gz, (316, 390) - (352, 426)
[Sat Oct 15 09:27:15 2011] XMMSAS bgd. selection expression = annulus(28977.123600, 35485.431800, 520.574015, 1041.148030, X, Y) && !ellipse(30845.373108, 35376.687714, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Oct 15 09:27:15 2011] Writing fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src13.gif
[Sat Oct 15 09:28:43 2011] Mean detx,y = (-5368.31, 5980.03) 
[Sat Oct 15 09:28:44 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Oct 15 09:28:55 2011] Binned source spectrum to 10 counts/bin
[Sat Oct 15 09:28:55 2011] Setting source spectrum file to fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Oct 15 09:28:55 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat Oct 15 10:28:30 2011] Updating aperture counts using extracted products
[Sat Oct 15 10:28:30 2011] Error reading totcts from fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Oct 15 10:28:34 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 10:28:34 2011] Using photon index=1.80, rate=0.00379, arf fullrun_mos2_xmm0110980201_pi300-10000_pass1_cl_src13.arf
[Sat Oct 15 10:28:34 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Oct 15 10:28:34 2011] Updating source flux to 6.8e-14