[Fri Oct 14 10:22:44 2011] Detection parameters:
  Position = (383.1, 292.8) = 12 44 45.76 -0 29 42.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.0 +/- 11.6
  Background counts = 20.1
  Rate = 0.001 +/- 0.0003

[Fri Oct 14 10:22:45 2011] Off-axis axis estimate = 6.15'
[Fri Oct 14 14:00:42 2011] Using EEF radius (= 9.50 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 14:00:42 2011] Initial guess for spatial extent in simple fitting = 9.50"
[Fri Oct 14 14:00:42 2011] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.041
[Fri Oct 14 14:00:42 2011] Giving source the simple spatial ID 39 for pass 0, mean size = 9.50"
[Fri Oct 14 16:17:05 2011] fullrun_mos1_xmm0110980201_pi300-10000_cl_pass0_src39.ximg exists
[Fri Oct 14 16:17:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980201_pi300-10000_cl_pass0_src39.csv
[Fri Oct 14 16:17:05 2011] fullrun_mos1_xmm0110980201_pi300-10000_cl_pass0_src39_1.ximg exists
[Fri Oct 14 16:17:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980201_pi300-10000_cl_pass0_src39.csv
[Fri Oct 14 16:17:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110980201_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110980201_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 16:17:06 2011] fullrun_mos1_xmm0110980201_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Fri Oct 14 16:17:06 2011] fullrun_mos1_xmm0110980201_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Fri Oct 14 16:17:06 2011] Fit fullrun_mos1_xmm0110980201_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Fri Oct 14 18:42:42 2011] Spatial fit model total counts = 255.997000, observed total counts = 256.000000
[Fri Oct 14 18:42:42 2011] Offset between fit and detection position for source 40 = 1.370823 pixels
[Fri Oct 14 18:42:42 2011] 254.845800 total counts/ 181.037000 bgd. counts: snr = 5.485604
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 1.370823 pixels
  Position = (384.4, 292.7) = 12 44 45.36 -0 29 43.1
  Extent = 8.9 (5.4-11.8)", rotation angle = 0
  Source counts = 73.8 +/- 16.0
  Background counts = 181.0
  Rate = 0.001 +/- 0.0003
[Fri Oct 14 18:42:42 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 18:42:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 18:42:42 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 18:42:42 2011] Source does appear to be extended
[Fri Oct 14 18:42:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 22:37:48 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 22:37:48 2011] Initial guess for spatial extent in simple fitting = 8.87"
[Fri Oct 14 22:37:48 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.970
[Fri Oct 14 22:37:48 2011] Giving source the simple spatial ID 39 for pass 1, mean size = 8.87"
[Sat Oct 15 00:41:42 2011] fullrun_mos1_xmm0110980201_pi300-10000_cl_pass1_src39.ximg exists
[Sat Oct 15 00:41:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980201_pi300-10000_cl_pass1_src39.csv
[Sat Oct 15 00:41:42 2011] fullrun_mos1_xmm0110980201_pi300-10000_cl_pass1_src39_1.ximg exists
[Sat Oct 15 00:41:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980201_pi300-10000_cl_pass1_src39.csv
[Sat Oct 15 00:41:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110980201_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110980201_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 00:41:43 2011] fullrun_mos1_xmm0110980201_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Sat Oct 15 00:41:43 2011] fullrun_mos1_xmm0110980201_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Sat Oct 15 00:41:43 2011] Fit fullrun_mos1_xmm0110980201_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Sat Oct 15 03:10:36 2011] Warning, spatial fit 39 centroid is now closest to src. 38
[Sat Oct 15 03:10:36 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 03:10:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 03:10:36 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 03:10:36 2011] Source does appear to be extended
[Sat Oct 15 03:10:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 08:29:12 2011] XMMSAS src. selection expression = ellipse(33396.295200, 25414.431600, 532.041015, 532.041015, 0.000000, X, Y)
[Sat Oct 15 08:29:12 2011] Writing source region out to fullrun_mos1_xmm0110980201_pi300-10000_pass1_cl_src40_src.reg
[Sat Oct 15 08:29:12 2011] Extracting stamp from image fullrun_mos1_xmm0110980201_pi300-10000_cl_sm2.00.img.gz, (354, 262) - (415, 323)
[Sat Oct 15 08:29:12 2011] XMMSAS bgd. selection expression = annulus(33396.295200, 25414.431600, 886.735026, 1773.470051, X, Y) && !ellipse(31529.386740, 27164.583060, 431.462412, 431.462412, 0.000000, X, Y) && !ellipse(31095.200178, 25422.171726, 593.679488, 259.414614, 128.703560, X, Y)
[Sat Oct 15 08:29:12 2011] Writing fullrun_mos1_xmm0110980201_pi300-10000_pass1_cl_src40.gif
[Sat Oct 15 08:45:12 2011] Mean detx,y = (-4843.04, 5301.52) 
[Sat Oct 15 08:45:15 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Oct 15 08:45:45 2011] Binned source spectrum to 10 counts/bin
[Sat Oct 15 08:45:46 2011] Setting source spectrum file to fullrun_mos1_xmm0110980201_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sat Oct 15 08:45:46 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0110980201_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Sat Oct 15 09:23:02 2011] Not generating rmf since there are only 73 counts
[Sat Oct 15 09:23:02 2011] rmf not generated due to insufficient counts
[Sat Oct 15 10:28:26 2011] Updating aperture counts using extracted products
[Sat Oct 15 10:28:26 2011] Error reading totcts from fullrun_mos1_xmm0110980201_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sat Oct 15 10:28:29 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 10:28:29 2011] Using photon index=1.80, rate=0.00128, arf fullrun_mos1_xmm0110980201_pi300-10000_pass1_cl_src40.arf
[Sat Oct 15 10:28:29 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Oct 15 10:28:29 2011] Updating source flux to 1.7e-14
[Sat Oct 15 10:28:39 2011] Source 40 has fewer than 100.000000 counts, skipping spectral fitting