[Tue Oct  4 21:59:44 2011] Detection parameters:
  Position = (299.1, 273.9) = 11 20 15.92 13 35 12.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4466.0 +/- 80.6
  Background counts = 116.0
  Rate = 0.1 +/- 0.002

[Tue Oct  4 21:59:45 2011] Off-axis axis estimate = 1.78'
[Tue Oct  4 22:03:23 2011] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 22:03:23 2011] Initial guess for spatial extent in simple fitting = 7.32"
[Tue Oct  4 22:03:23 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.840
[Tue Oct  4 22:03:23 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.32"
[Tue Oct  4 23:49:31 2011] fullrun_pn_xmm0110980101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Oct  4 23:49:31 2011] fullrun_pn_xmm0110980101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Oct  4 23:49:31 2011] Fit fullrun_pn_xmm0110980101_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue Oct  4 23:49:31 2011] fullrun_pn_xmm0110980101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Oct  4 23:49:31 2011] fullrun_pn_xmm0110980101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Oct  4 23:49:31 2011] Fit fullrun_pn_xmm0110980101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct  5 02:04:22 2011] Spatial fit model total counts = 5796.730000, observed total counts = 5800.000000
[Wed Oct  5 02:04:22 2011] Offset between fit and detection position for source 1 = 0.251026 pixels
[Wed Oct  5 02:04:22 2011] 5840.130000 total counts/ 2600.880000 bgd. counts: snr = 63.516171
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.251026 pixels
  Position = (298.8, 273.8) = 11 20 15.99 13 35 13.4
  Extent = 6.5 (6.3-6.8)", rotation angle = 0
  Source counts = 3239.2 +/- 76.4
  Background counts = 2600.9
  Rate = 0.07 +/- 0.002
[Wed Oct  5 02:04:22 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 02:04:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 02:04:22 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 02:04:22 2011] Source does appear to be extended
[Wed Oct  5 02:04:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 02:05:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 02:05:02 2011] Initial guess for spatial extent in simple fitting = 6.52"
[Wed Oct  5 02:05:02 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.001
[Wed Oct  5 02:05:02 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.52"
[Wed Oct  5 03:53:53 2011] fullrun_pn_xmm0110980101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Oct  5 03:53:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110980101_pi300-10000_cl_pass1_src1.csv
[Wed Oct  5 03:53:53 2011] fullrun_pn_xmm0110980101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Oct  5 03:53:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110980101_pi300-10000_cl_pass1_src1.csv
[Wed Oct  5 03:53:53 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110980101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110980101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 03:53:53 2011] fullrun_pn_xmm0110980101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct  5 03:53:53 2011] fullrun_pn_xmm0110980101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct  5 03:53:53 2011] Fit fullrun_pn_xmm0110980101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct  5 06:04:59 2011] Spatial fit model total counts = 5722.210000, observed total counts = 5713.000000
[Wed Oct  5 06:04:59 2011] Offset between fit and detection position for source 1 = 0.015981 pixels
[Wed Oct  5 06:04:59 2011] 5784.010000 total counts/ 2540.000000 bgd. counts: snr = 64.367305
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.015981 pixels
  Position = (298.8, 273.8) = 11 20 15.99 13 35 13.3
  Extent = 6.5 (6.2-6.7)", rotation angle = 0
  Source counts = 3244.0 +/- 76.1
  Background counts = 2540.0
  Rate = 0.07 +/- 0.002
[Wed Oct  5 06:04:59 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 06:04:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 06:04:59 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 06:04:59 2011] Source does appear to be extended
[Wed Oct  5 06:04:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 06:05:25 2011] Counts = 3244.010000, rescaling region sizes by 2.000000
[Wed Oct  5 06:05:25 2011] XMMSAS src. selection expression = ellipse(25949.824400, 23770.389920, 780.111622, 780.111622, 0.000000, X, Y)
[Wed Oct  5 06:05:25 2011] Writing source region out to fullrun_pn_xmm0110980101_pi300-10000_pass1_cl_src1_src.reg
[Wed Oct  5 06:05:25 2011] Extracting stamp from image fullrun_pn_xmm0110980101_pi300-10000_cl_sm2.00.img.gz, (254, 229) - (344, 319)
[Wed Oct  5 06:05:25 2011] XMMSAS bgd. selection expression = annulus(25949.824400, 23770.389920, 2600.372075, 5200.744150, X, Y) && !ellipse(27536.476471, 29032.912048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26271.238400, 20450.556200, 454.100813, 454.100813, 0.000000, X, Y) && !ellipse(27105.710940, 19127.083600, 411.276012, 411.276012, 0.000000, X, Y) && !ellipse(23453.728400, 27552.291800, 396.086411, 396.086411, 0.000000, X, Y) && !ellipse(25965.138382, 26841.629000, 397.756811, 397.756811, 0.000000, X, Y) && !ellipse(27712.967940, 26138.067400, 518.308815, 518.308815, 0.000000, X, Y) && !ellipse(26714.946000, 25141.398000, 1122.872032, 1122.872032, 0.000000, X, Y) && !ellipse(26327.944305, 24562.453369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29629.927246, 24574.265594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31138.901200, 24378.306400, 394.333611, 394.333611, 0.000000, X, Y) && !ellipse(20792.718600, 23964.793784, 329.040809, 329.040809, 0.000000, X, Y) && !ellipse(24570.022000, 23717.000000, 297.430409, 297.430409, 0.000000, X, Y) && !ellipse(22754.375763, 23443.292145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31436.490480, 23415.770400, 427.511212, 427.511212, 0.000000, X, Y) && !ellipse(25034.230835, 23452.382965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26598.929600, 23080.018000, 337.600010, 337.600010, 0.000000, X, Y) && !ellipse(26661.830170, 22588.295715, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Oct  5 06:05:25 2011] Writing fullrun_pn_xmm0110980101_pi300-10000_pass1_cl_src1.gif
[Wed Oct  5 06:05:40 2011] Mean detx,y = (-127.49, -397.63) 
[Wed Oct  5 06:05:44 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 06:07:00 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 06:07:01 2011] Setting source spectrum file to fullrun_pn_xmm0110980101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Oct  5 06:07:01 2011] Setting bgd. spectrum file to fullrun_pn_xmm0110980101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Oct  5 09:39:17 2011] Updating aperture counts using extracted products
[Wed Oct  5 09:39:17 2011] Error reading totcts from fullrun_pn_xmm0110980101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Oct  5 09:39:17 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 09:39:17 2011] Using photon index=1.80, rate=0.0711, arf fullrun_pn_xmm0110980101_pi300-10000_pass1_cl_src1.arf
[Wed Oct  5 09:39:17 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 09:39:17 2011] Updating source flux to 1.7e-13
[Wed Oct  5 09:44:32 2011] Reading fit data from xmm0110980101/analysis//spectral/fullrun_pn_xmm0110980101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Oct  5 09:44:32 2011] Spectral fit parameter nH value = 3.33176e+21
[Wed Oct  5 09:44:32 2011] Spectral fit parameter PhoIndex value = 1.542
[Wed Oct  5 09:44:32 2011] Failed to get F(0.3-8.0) from xmm0110980101/analysis//spectral/fullrun_pn_xmm0110980101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Oct  5 09:44:32 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 09:44:32 2011] Using Nh = 3.3e+21, photon index=1.54, rate=0.0711, arf fullrun_pn_xmm0110980101_pi300-10000_pass1_cl_src1.arf
[Wed Oct  5 09:44:32 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 09:44:32 2011] Updating source flux to 3.2e-13