[Tue Oct  4 22:00:42 2011] Detection parameters:
  Position = (274.8, 91.1) = 11 20 23.14 13 21 58.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.1 +/- 15.0
  Background counts = 30.8
  Rate = 0.002 +/- 0.0003

[Tue Oct  4 22:00:42 2011] Off-axis axis estimate = 15.13'
[Wed Oct  5 01:13:03 2011] Using EEF radius (= 13.99 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 01:13:03 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 01:13:03 2011] Initial guess for spatial extent in simple fitting = 13.99"
[Wed Oct  5 01:13:03 2011] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.158
[Wed Oct  5 01:13:03 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 13.99"
[Wed Oct  5 02:04:04 2011] fullrun_mos2_xmm0110980101_pi300-10000_cl_pass0_src29.ximg exists
[Wed Oct  5 02:04:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980101_pi300-10000_cl_pass0_src29.csv
[Wed Oct  5 02:04:04 2011] fullrun_mos2_xmm0110980101_pi300-10000_cl_pass0_src29_1.ximg exists
[Wed Oct  5 02:04:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110980101_pi300-10000_cl_pass0_src29.csv
[Wed Oct  5 02:04:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110980101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110980101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 02:04:04 2011] fullrun_mos2_xmm0110980101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Wed Oct  5 02:04:04 2011] fullrun_mos2_xmm0110980101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Wed Oct  5 02:04:04 2011] Fit fullrun_mos2_xmm0110980101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Wed Oct  5 02:04:42 2011] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 18.221698 pixels away
[Wed Oct  5 02:04:42 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 02:04:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 02:04:42 2011] Assessing source extent using major
[Wed Oct  5 02:04:42 2011] Source does appear to be extended
[Wed Oct  5 02:04:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 05:10:35 2011] Using EEF radius (= 13.99 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 05:10:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 05:10:35 2011] Initial guess for spatial extent in simple fitting = 13.99"
[Wed Oct  5 05:10:35 2011] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.158
[Wed Oct  5 05:10:35 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 13.99"
[Wed Oct  5 06:04:48 2011] fullrun_mos2_xmm0110980101_pi300-10000_cl_pass1_src28.ximg exists
[Wed Oct  5 06:04:48 2011] fullrun_mos2_xmm0110980101_pi300-10000_cl_pass1_src28_1.ximg exists
[Wed Oct  5 06:04:48 2011] Fit fullrun_mos2_xmm0110980101_pi300-10000_cl_pass1_src28 appears to have run properly
[Wed Oct  5 06:04:49 2011] fullrun_mos2_xmm0110980101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Wed Oct  5 06:04:49 2011] fullrun_mos2_xmm0110980101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Wed Oct  5 06:04:49 2011] Fit fullrun_mos2_xmm0110980101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Wed Oct  5 06:05:12 2011] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 18.221698 pixels away
[Wed Oct  5 06:05:12 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 06:05:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 06:05:12 2011] Assessing source extent using major
[Wed Oct  5 06:05:12 2011] Source does appear to be extended
[Wed Oct  5 06:05:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 08:55:47 2011] XMMSAS src. selection expression = ellipse(23862.622162, 7879.993622, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Oct  5 08:55:47 2011] Writing source region out to fullrun_mos2_xmm0110980101_pi300-10000_pass1_cl_src40_src.reg
[Wed Oct  5 08:55:47 2011] Extracting stamp from image fullrun_mos2_xmm0110980101_pi300-10000_cl_sm2.00.img.gz, (237, 54) - (312, 129)
[Wed Oct  5 08:55:47 2011] XMMSAS bgd. selection expression = annulus(23862.622162, 7879.993622, 1087.500000, 2175.000000, X, Y) && !ellipse(21970.369507, 10233.306053, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Oct  5 08:55:47 2011] Writing fullrun_mos2_xmm0110980101_pi300-10000_pass1_cl_src40.gif
[Wed Oct  5 09:03:12 2011] Mean detx,y = (-8583.92, 13643.37) 
[Wed Oct  5 09:03:13 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 09:03:29 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 09:03:29 2011] Setting source spectrum file to fullrun_mos2_xmm0110980101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Wed Oct  5 09:03:29 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0110980101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Wed Oct  5 09:37:49 2011] Not generating rmf since there are only 96 counts
[Wed Oct  5 09:37:49 2011] rmf not generated due to insufficient counts
[Wed Oct  5 09:39:19 2011] Updating aperture counts using extracted products
[Wed Oct  5 09:39:19 2011] Error reading totcts from fullrun_mos2_xmm0110980101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Wed Oct  5 09:39:20 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 09:39:20 2011] Using photon index=1.80, rate=0.00176, arf fullrun_mos2_xmm0110980101_pi300-10000_pass1_cl_src40.arf
[Wed Oct  5 09:39:20 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 09:39:20 2011] Updating source flux to 5.2e-14
[Wed Oct  5 09:40:53 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting