[Tue Oct  4 22:00:13 2011] Detection parameters:
  Position = (307.5, 279.6) = 11 20 13.40 13 35 39.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.5 +/- 14.3
  Background counts = 50.9
  Rate = 0.001 +/- 0.0003

[Tue Oct  4 22:00:14 2011] Off-axis axis estimate = 1.51'
[Tue Oct  4 23:49:32 2011] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 23:49:32 2011] Initial guess for spatial extent in simple fitting = 7.19"
[Tue Oct  4 23:49:32 2011] source mask rpix=1.7, npix_max = 18, mask sum = 25, frac = 1.350
[Tue Oct  4 23:49:32 2011] Giving source the simple spatial ID 38 for pass 0, mean size = 7.19"
[Wed Oct  5 01:13:02 2011] fullrun_mos1_xmm0110980101_pi300-10000_cl_pass0_src38.ximg exists
[Wed Oct  5 01:13:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980101_pi300-10000_cl_pass0_src38.csv
[Wed Oct  5 01:13:02 2011] fullrun_mos1_xmm0110980101_pi300-10000_cl_pass0_src38_1.ximg exists
[Wed Oct  5 01:13:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980101_pi300-10000_cl_pass0_src38.csv
[Wed Oct  5 01:13:02 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110980101_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110980101_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 01:13:03 2011] fullrun_mos1_xmm0110980101_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Wed Oct  5 01:13:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Wed Oct  5 01:13:03 2011] fullrun_mos1_xmm0110980101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Wed Oct  5 01:13:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Wed Oct  5 01:13:03 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110980101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110980101_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 02:04:30 2011] Warning, spatial fit 38 centroid is now closest to src. 29
[Wed Oct  5 02:04:31 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 02:04:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 02:04:31 2011] Assessing source extent using major
[Wed Oct  5 02:04:31 2011] Source does appear to be extended
[Wed Oct  5 02:04:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 02:04:31 2011] Source is confused with source 29
[Wed Oct  5 03:53:54 2011] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 03:53:54 2011] Initial guess for spatial extent in simple fitting = 7.19"
[Wed Oct  5 03:53:54 2011] source mask rpix=1.7, npix_max = 18, mask sum = 25, frac = 1.350
[Wed Oct  5 03:53:54 2011] Giving source the simple spatial ID 36 for pass 1, mean size = 7.19"
[Wed Oct  5 05:10:35 2011] fullrun_mos1_xmm0110980101_pi300-10000_cl_pass1_src36.ximg exists
[Wed Oct  5 05:10:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980101_pi300-10000_cl_pass1_src36.csv
[Wed Oct  5 05:10:35 2011] fullrun_mos1_xmm0110980101_pi300-10000_cl_pass1_src36_1.ximg exists
[Wed Oct  5 05:10:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110980101_pi300-10000_cl_pass1_src36.csv
[Wed Oct  5 05:10:35 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110980101_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110980101_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 05:10:35 2011] fullrun_mos1_xmm0110980101_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Wed Oct  5 05:10:35 2011] fullrun_mos1_xmm0110980101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Wed Oct  5 05:10:35 2011] Fit fullrun_mos1_xmm0110980101_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly
[Wed Oct  5 06:05:06 2011] Warning, spatial fit 36 centroid is now closest to src. 29
[Wed Oct  5 06:05:06 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 06:05:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 06:05:06 2011] Assessing source extent using major
[Wed Oct  5 06:05:06 2011] Source does appear to be extended
[Wed Oct  5 06:05:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 07:56:01 2011] XMMSAS src. selection expression = ellipse(26704.419495, 24278.012115, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Oct  5 07:56:01 2011] Writing source region out to fullrun_mos1_xmm0110980101_pi300-10000_pass1_cl_src26_src.reg
[Wed Oct  5 07:56:01 2011] Extracting stamp from image fullrun_mos1_xmm0110980101_pi300-10000_cl_sm2.00.img.gz, (270, 242) - (345, 317)
[Wed Oct  5 07:56:01 2011] XMMSAS bgd. selection expression = annulus(26704.419495, 24278.012115, 1087.500000, 2175.000000, X, Y) && !ellipse(25955.158560, 23792.494600, 504.084015, 504.084015, 0.000000, X, Y) && !ellipse(26654.298000, 23114.191600, 323.876809, 323.876809, 0.000000, X, Y) && !ellipse(25932.201400, 26840.817800, 392.760508, 392.760508, 0.000000, X, Y) && !ellipse(24545.364800, 23683.832040, 321.355209, 321.355209, 0.000000, X, Y) && !ellipse(27780.651550, 26131.530548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27253.724000, 23224.968000, 1186.448034, 1186.448034, 0.000000, X, Y) && !ellipse(26725.524323, 23690.207214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25086.747314, 23205.730743, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Oct  5 07:56:01 2011] Writing fullrun_mos1_xmm0110980101_pi300-10000_pass1_cl_src26.gif
[Wed Oct  5 08:05:25 2011] Mean detx,y = (405.48, -1203.86) 
[Wed Oct  5 08:05:26 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 08:05:36 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 08:05:36 2011] Setting source spectrum file to fullrun_mos1_xmm0110980101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed Oct  5 08:05:36 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0110980101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Wed Oct  5 08:55:40 2011] Not generating rmf since there are only 59 counts
[Wed Oct  5 08:55:40 2011] rmf not generated due to insufficient counts
[Wed Oct  5 09:39:18 2011] Updating aperture counts using extracted products
[Wed Oct  5 09:39:18 2011] Error reading totcts from fullrun_mos1_xmm0110980101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed Oct  5 09:39:19 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 09:39:19 2011] Using photon index=1.80, rate=0.00114, arf fullrun_mos1_xmm0110980101_pi300-10000_pass1_cl_src26.arf
[Wed Oct  5 09:39:19 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 09:39:19 2011] Updating source flux to 1.1e-14
[Wed Oct  5 09:39:22 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting