[Thu Jul 19 02:26:11 2012] Detection parameters:
  Position = (172.9, 182.3) = 3 15 49.84 -55 18 11.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.0 +/- 9.3
  Background counts = 2.3
  Rate = 0.01 +/- 0.002

[Thu Jul 19 02:26:11 2012] Off-axis axis estimate = 12.40'
[Thu Jul 19 02:48:37 2012] Using EEF radius (= 12.63 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 02:48:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 19 02:48:37 2012] Initial guess for spatial extent in simple fitting = 12.63"
[Thu Jul 19 02:48:37 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.907
[Thu Jul 19 02:48:37 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.63"
[Thu Jul 19 03:04:56 2012] fullrun_mos1_xmm0110970601_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jul 19 03:04:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110970601_pi300-10000_cl_pass0_src1.csv
[Thu Jul 19 03:04:56 2012] fullrun_mos1_xmm0110970601_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jul 19 03:04:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110970601_pi300-10000_cl_pass0_src1.csv
[Thu Jul 19 03:04:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110970601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110970601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 03:04:56 2012] fullrun_mos1_xmm0110970601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jul 19 03:04:56 2012] fullrun_mos1_xmm0110970601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jul 19 03:04:56 2012] Fit fullrun_mos1_xmm0110970601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jul 19 03:19:19 2012] Spatial fit model total counts = 100.997000, observed total counts = 101.000000
[Thu Jul 19 03:19:19 2012] Offset between fit and detection position for source 12 = 0.206074 pixels
[Thu Jul 19 03:19:19 2012] 102.506100 total counts/ 66.714300 bgd. counts: snr = 4.382017
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.206074 pixels
  Position = (172.9, 182.5) = 3 15 49.84 -55 18 11.6
  Extent = 5.2 (3.6-6.8)", rotation angle = 0
  Source counts = 35.8 +/- 10.1
  Background counts = 66.7
  Rate = 0.004 +/- 0.001
[Thu Jul 19 03:19:19 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 03:19:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 03:19:19 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 03:19:19 2012] Source does appear to be extended
[Thu Jul 19 03:19:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 03:36:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 19 03:36:20 2012] Initial guess for spatial extent in simple fitting = 5.15"
[Thu Jul 19 03:36:20 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.057
[Thu Jul 19 03:36:20 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.15"
[Thu Jul 19 03:52:03 2012] fullrun_mos1_xmm0110970601_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jul 19 03:52:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110970601_pi300-10000_cl_pass1_src1.csv
[Thu Jul 19 03:52:03 2012] fullrun_mos1_xmm0110970601_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jul 19 03:52:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110970601_pi300-10000_cl_pass1_src1.csv
[Thu Jul 19 03:52:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110970601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110970601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 03:52:03 2012] fullrun_mos1_xmm0110970601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jul 19 03:52:03 2012] fullrun_mos1_xmm0110970601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jul 19 03:52:03 2012] Fit fullrun_mos1_xmm0110970601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jul 19 04:05:08 2012] Warning, spatial fit 1 centroid is now closest to src. 4
[Thu Jul 19 04:05:08 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 04:05:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 04:05:08 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 04:05:08 2012] Source does appear to be extended
[Thu Jul 19 04:05:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 04:12:16 2012] XMMSAS src. selection expression = ellipse(14996.801200, 15825.232640, 309.183609, 309.183609, 0.000000, X, Y)
[Thu Jul 19 04:12:16 2012] Writing source region out to fullrun_mos1_xmm0110970601_pi300-10000_pass1_cl_src12_src.reg
[Thu Jul 19 04:12:16 2012] Extracting stamp from image fullrun_mos1_xmm0110970601_pi300-10000_cl_sm2.00.img.gz, (155, 165) - (191, 200)
[Thu Jul 19 04:12:16 2012] XMMSAS bgd. selection expression = annulus(14996.801200, 15825.232640, 515.306015, 1030.612030, X, Y)
[Thu Jul 19 04:12:16 2012] Writing fullrun_mos1_xmm0110970601_pi300-10000_pass1_cl_src12.gif
[Thu Jul 19 04:12:18 2012] Mean detx,y = (7040.77, 10872.90) 
[Thu Jul 19 04:12:19 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 04:12:25 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 04:12:25 2012] Setting source spectrum file to fullrun_mos1_xmm0110970601_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jul 19 04:12:25 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110970601_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Jul 19 04:14:53 2012] Not generating rmf since there are only 35 counts
[Thu Jul 19 04:14:53 2012] rmf not generated due to insufficient counts
[Thu Jul 19 04:18:26 2012] Updating aperture counts using extracted products
[Thu Jul 19 04:18:26 2012] Error reading totcts from fullrun_mos1_xmm0110970601_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jul 19 04:18:26 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 04:18:26 2012] Using photon index=1.80, rate=0.00422, arf fullrun_mos1_xmm0110970601_pi300-10000_pass1_cl_src12.arf
[Thu Jul 19 04:18:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 04:18:26 2012] Updating source flux to 9.3e-14
[Thu Jul 19 04:18:27 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jul 19 04:18:28 2012] xmm0110970601/analysis//spectral/fullrun_mos1_xmm0110970601_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete