[Tue Jun 11 00:49:56 2013] Detection parameters:
  Position = (254.1, 303.1) = 3 14 32.27 -55 14 40.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24.3 +/- 6.4
  Background counts = 2.0
  Rate = 0.003 +/- 0.0008

[Tue Jun 11 00:49:57 2013] Off-axis axis estimate = 3.23'
[Tue Jun 11 01:47:08 2013] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 01:47:08 2013] Initial guess for spatial extent in simple fitting = 8.04"
[Tue Jun 11 01:47:08 2013] source mask rpix=1.8, npix_max = 22, mask sum = 16, frac = 0.725
[Tue Jun 11 01:47:08 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 8.04"
[Tue Jun 11 02:17:26 2013] fullrun_mos2_xmm0110970301_pi300-10000_cl_pass0_src12.ximg exists
[Tue Jun 11 02:17:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110970301_pi300-10000_cl_pass0_src12.csv
[Tue Jun 11 02:17:26 2013] fullrun_mos2_xmm0110970301_pi300-10000_cl_pass0_src12_1.ximg exists
[Tue Jun 11 02:17:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110970301_pi300-10000_cl_pass0_src12.csv
[Tue Jun 11 02:17:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110970301_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110970301_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 02:17:26 2013] fullrun_mos2_xmm0110970301_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Tue Jun 11 02:17:26 2013] fullrun_mos2_xmm0110970301_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Tue Jun 11 02:17:26 2013] Fit fullrun_mos2_xmm0110970301_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Tue Jun 11 02:17:36 2013] Spatial fit model total counts = 41.756500, observed total counts = 42.000000
[Tue Jun 11 02:17:36 2013] Offset between fit and detection position for source 9 = 0.402432 pixels
[Tue Jun 11 02:17:36 2013] 42.041000 total counts/ 22.919300 bgd. counts: snr = 3.994163
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.402432 pixels
  Position = (253.9, 302.7) = 3 14 32.37 -55 14 42.6
  Extent = 6.9 (4.1-14.0)", rotation angle = 0
  Source counts = 19.1 +/- 6.5
  Background counts = 22.9
  Rate = 0.002 +/- 0.0008
[Tue Jun 11 02:17:36 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 02:17:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 02:17:36 2013] Assessing source extent using major axis lower bound
[Tue Jun 11 02:17:36 2013] Source does appear to be extended
[Tue Jun 11 02:17:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 03:10:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 11 03:10:58 2013] Initial guess for spatial extent in simple fitting = 6.86"
[Tue Jun 11 03:10:58 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.928
[Tue Jun 11 03:10:58 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 6.86"
[Tue Jun 11 03:39:53 2013] fullrun_mos2_xmm0110970301_pi300-10000_cl_pass1_src12.ximg exists
[Tue Jun 11 03:39:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110970301_pi300-10000_cl_pass1_src12.csv
[Tue Jun 11 03:39:53 2013] fullrun_mos2_xmm0110970301_pi300-10000_cl_pass1_src12_1.ximg exists
[Tue Jun 11 03:39:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110970301_pi300-10000_cl_pass1_src12.csv
[Tue Jun 11 03:39:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110970301_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110970301_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 03:39:53 2013] fullrun_mos2_xmm0110970301_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Tue Jun 11 03:39:53 2013] fullrun_mos2_xmm0110970301_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Jun 11 03:39:53 2013] Fit fullrun_mos2_xmm0110970301_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Tue Jun 11 03:40:08 2013] Spatial fit model total counts = 40.824500, observed total counts = 41.000000
[Tue Jun 11 03:40:08 2013] Offset between fit and detection position for source 9 = 0.066509 pixels
[Tue Jun 11 03:40:08 2013] 41.623700 total counts/ 23.786600 bgd. counts: snr = 3.657279
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.066509 pixels
  Position = (253.9, 302.8) = 3 14 32.38 -55 14 42.4
  Extent = 6.2 (4.0-13.7)", rotation angle = 0
  Source counts = 17.8 +/- 6.5
  Background counts = 23.8
  Rate = 0.002 +/- 0.0008
[Tue Jun 11 03:40:08 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 03:40:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 03:40:08 2013] Assessing source extent using major axis lower bound
[Tue Jun 11 03:40:08 2013] Source does appear to be extended
[Tue Jun 11 03:40:08 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 04:06:30 2013] XMMSAS src. selection expression = ellipse(22038.607440, 26291.843000, 372.328211, 372.328211, 0.000000, X, Y)
[Tue Jun 11 04:06:30 2013] Writing source region out to fullrun_mos2_xmm0110970301_pi300-10000_pass1_cl_src9_src.reg
[Tue Jun 11 04:06:30 2013] Extracting stamp from image fullrun_mos2_xmm0110970301_pi300-10000_cl_sm2.00.img.gz, (232, 281) - (275, 324)
[Tue Jun 11 04:06:30 2013] XMMSAS bgd. selection expression = annulus(22038.607440, 26291.843000, 620.547018, 1241.094036, X, Y)
[Tue Jun 11 04:06:30 2013] Writing fullrun_mos2_xmm0110970301_pi300-10000_pass1_cl_src9.gif
[Tue Jun 11 04:10:20 2013] Mean detx,y = (-2624.73, -2417.23) 
[Tue Jun 11 04:10:23 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 11 04:10:30 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 11 04:10:30 2013] Setting source spectrum file to fullrun_mos2_xmm0110970301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue Jun 11 04:10:30 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0110970301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Tue Jun 11 04:13:02 2013] Not generating rmf since there are only 17 counts
[Tue Jun 11 04:13:02 2013] rmf not generated due to insufficient counts
[Tue Jun 11 04:14:11 2013] Updating aperture counts using extracted products
[Tue Jun 11 04:14:11 2013] Total counts from fullrun_mos2_xmm0110970301_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 22.00
[Tue Jun 11 04:14:11 2013] Total counts from fullrun_mos2_xmm0110970301_pi300-10000_pass1_cl_src9_bgd.pi.gz = 49.00
[Tue Jun 11 04:14:11 2013] Got source and background scale factors 440000.000000, 3616216.000000
[Tue Jun 11 04:14:11 2013] User source parameters:
  Position = (253.9, 302.8) = 3 14 32.38 -55 14 42.4
  Extent = 6.2 (4.0-13.7)", rotation angle = 0
  Source aperture counts = 16.0 +/- 5.8
  Background aperture counts = 6.0
  Rate = 0.002 +/- 0.0007

[Tue Jun 11 04:14:12 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 11 04:14:12 2013] Using photon index=1.80, rate=0.0021, arf fullrun_mos2_xmm0110970301_pi300-10000_pass1_cl_src9.arf
[Tue Jun 11 04:14:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 11 04:14:12 2013] Updating source flux to 2.3e-14
[Tue Jun 11 04:14:15 2013] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jun 11 04:14:16 2013] xmm0110970301/analysis//spectral/fullrun_mos2_xmm0110970301_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete