[Tue Jun 11 00:49:56 2013] Detection parameters:
  Position = (380.3, 363.2) = 3 13 28.13 -55 10 17.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.1 +/- 8.1
  Background counts = 1.6
  Rate = 0.005 +/- 0.001

[Tue Jun 11 00:49:57 2013] Off-axis axis estimate = 7.57'
[Tue Jun 11 01:47:08 2013] Using EEF radius (= 10.21 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 01:47:08 2013] Initial guess for spatial extent in simple fitting = 10.21"
[Tue Jun 11 01:47:08 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.110
[Tue Jun 11 01:47:08 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 10.21"
[Tue Jun 11 02:17:26 2013] fullrun_mos2_xmm0110970301_pi300-10000_cl_pass0_src5.ximg exists
[Tue Jun 11 02:17:26 2013] fullrun_mos2_xmm0110970301_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Jun 11 02:17:26 2013] Fit fullrun_mos2_xmm0110970301_pi300-10000_cl_pass0_src5 appears to have run properly
[Tue Jun 11 02:17:26 2013] fullrun_mos2_xmm0110970301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Jun 11 02:17:26 2013] fullrun_mos2_xmm0110970301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Jun 11 02:17:26 2013] Fit fullrun_mos2_xmm0110970301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Jun 11 02:17:36 2013] Spatial fit model total counts = 69.414500, observed total counts = 64.000000
[Tue Jun 11 02:17:36 2013] Offset between fit and detection position for source 3 = 0.325210 pixels
[Tue Jun 11 02:17:36 2013] 68.536500 total counts/ 31.840800 bgd. counts: snr = 6.503141
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.325210 pixels
  Position = (380.1, 363.5) = 3 13 28.24 -55 10 17.8
  Extent = 9.0 (6.2-13.1)" x 4.6 (3.2-6.5)", rotation angle = 36 (13-61) degrees
  Source counts = 36.7 +/- 8.3
  Background counts = 31.8
  Rate = 0.004 +/- 0.001
[Tue Jun 11 02:17:36 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 02:17:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 02:17:36 2013] Assessing source extent using major axis lower bound
[Tue Jun 11 02:17:36 2013] Source does appear to be extended
[Tue Jun 11 02:17:36 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.96
[Tue Jun 11 02:17:36 2013] Source is confused with source 5
[Tue Jun 11 03:10:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 11 03:10:58 2013] Initial guess for spatial extent in simple fitting = 6.80"
[Tue Jun 11 03:10:58 2013] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.175
[Tue Jun 11 03:10:58 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 6.80"
[Tue Jun 11 03:39:53 2013] fullrun_mos2_xmm0110970301_pi300-10000_cl_pass1_src5.ximg exists
[Tue Jun 11 03:39:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110970301_pi300-10000_cl_pass1_src5.csv
[Tue Jun 11 03:39:53 2013] fullrun_mos2_xmm0110970301_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Jun 11 03:39:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110970301_pi300-10000_cl_pass1_src5.csv
[Tue Jun 11 03:39:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110970301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110970301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 03:39:53 2013] fullrun_mos2_xmm0110970301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Jun 11 03:39:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110970301_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue Jun 11 03:39:53 2013] fullrun_mos2_xmm0110970301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Jun 11 03:39:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110970301_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue Jun 11 03:39:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110970301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110970301_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 03:40:08 2013] Warning, spatial fit 5 centroid is now closest to src. 5
[Tue Jun 11 03:40:08 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 03:40:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 03:40:08 2013] Assessing source extent using major axis lower bound
[Tue Jun 11 03:40:08 2013] Source does appear to be extended
[Tue Jun 11 03:40:08 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.96
[Tue Jun 11 04:06:30 2013] XMMSAS src. selection expression = ellipse(33021.362960, 31575.847200, 537.736215, 278.208008, 36.348300, X, Y)
[Tue Jun 11 04:06:30 2013] Writing source region out to fullrun_mos2_xmm0110970301_pi300-10000_pass1_cl_src3_src.reg
[Tue Jun 11 04:06:30 2013] Extracting stamp from image fullrun_mos2_xmm0110970301_pi300-10000_cl_sm2.00.img.gz, (349, 333) - (411, 394)
[Tue Jun 11 04:06:30 2013] XMMSAS bgd. selection expression = annulus(33021.362960, 31575.847200, 896.227026, 1792.454052, X, Y) && !ellipse(32238.572160, 31080.343020, 1811.912052, 251.638407, 63.208200, X, Y)
[Tue Jun 11 04:06:30 2013] Writing fullrun_mos2_xmm0110970301_pi300-10000_pass1_cl_src3.gif
[Tue Jun 11 04:07:30 2013] Mean detx,y = (8846.53, -6486.58) 
[Tue Jun 11 04:07:31 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 11 04:07:47 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 11 04:07:47 2013] Setting source spectrum file to fullrun_mos2_xmm0110970301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 11 04:07:47 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0110970301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jun 11 04:12:28 2013] Not generating rmf since there are only 36 counts
[Tue Jun 11 04:12:28 2013] rmf not generated due to insufficient counts
[Tue Jun 11 04:14:09 2013] Updating aperture counts using extracted products
[Tue Jun 11 04:14:09 2013] Total counts from fullrun_mos2_xmm0110970301_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 38.00
[Tue Jun 11 04:14:09 2013] Total counts from fullrun_mos2_xmm0110970301_pi300-10000_pass1_cl_src3_bgd.pi.gz = 94.00
[Tue Jun 11 04:14:09 2013] Got source and background scale factors 391685.000000, 6583032.000000
[Tue Jun 11 04:14:09 2013] User source parameters:
  Position = (380.1, 363.5) = 3 13 28.24 -55 10 17.8
  Extent = 9.0 (6.2-13.1)" x 4.6 (3.2-6.5)", rotation angle = 36 (13-61) degrees
  Source aperture counts = 32.4 +/- 7.2
  Background aperture counts = 5.6
  Rate = 0.004 +/- 0.0009

[Tue Jun 11 04:14:12 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 11 04:14:12 2013] Using photon index=1.80, rate=0.00432, arf fullrun_mos2_xmm0110970301_pi300-10000_pass1_cl_src3.arf
[Tue Jun 11 04:14:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 11 04:14:12 2013] Updating source flux to 9.9e-14
[Tue Jun 11 04:14:15 2013] Flag c found in src. 3 procflags, skipping spectral fitting
[Tue Jun 11 04:14:15 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jun 11 04:14:16 2013] xmm0110970301/analysis//spectral/fullrun_mos2_xmm0110970301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete