[Tue Jun 11 00:49:36 2013] Detection parameters:
  Position = (453.6, 265.0) = 3 12 50.70 -55 17 25.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25.3 +/- 6.3
  Background counts = 2.1
  Rate = 0.003 +/- 0.0007

[Tue Jun 11 00:49:37 2013] Off-axis axis estimate = 11.50'
[Tue Jun 11 01:13:28 2013] Using EEF radius (= 12.18 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 01:13:28 2013] Initial guess for spatial extent in simple fitting = 12.18"
[Tue Jun 11 01:13:28 2013] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.964
[Tue Jun 11 01:13:28 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 12.18"
[Tue Jun 11 01:47:07 2013] fullrun_mos1_xmm0110970301_pi300-10000_cl_pass0_src12.ximg exists
[Tue Jun 11 01:47:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110970301_pi300-10000_cl_pass0_src12.csv
[Tue Jun 11 01:47:07 2013] fullrun_mos1_xmm0110970301_pi300-10000_cl_pass0_src12_1.ximg exists
[Tue Jun 11 01:47:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110970301_pi300-10000_cl_pass0_src12.csv
[Tue Jun 11 01:47:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110970301_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110970301_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 01:47:08 2013] fullrun_mos1_xmm0110970301_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Tue Jun 11 01:47:08 2013] fullrun_mos1_xmm0110970301_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Tue Jun 11 01:47:08 2013] Fit fullrun_mos1_xmm0110970301_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Tue Jun 11 02:17:33 2013] Spatial fit model total counts = 41.580200, observed total counts = 41.000000
[Tue Jun 11 02:17:33 2013] Offset between fit and detection position for source 12 = 0.281126 pixels
[Tue Jun 11 02:17:33 2013] 43.170300 total counts/ 29.432000 bgd. counts: snr = 2.532346
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.281126 pixels
  Position = (453.4, 264.8) = 3 12 50.81 -55 17 25.9
  Extent = 4.2 (3.0-6.3)", rotation angle = 0
  Source counts = 13.7 +/- 6.6
  Background counts = 29.4
  Rate = 0.002 +/- 0.0008
[Tue Jun 11 02:17:33 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 02:17:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 02:17:33 2013] Assessing source extent using major axis lower bound
[Tue Jun 11 02:17:33 2013] Source does appear to be extended
[Tue Jun 11 02:17:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 02:38:08 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 11 02:38:08 2013] Initial guess for spatial extent in simple fitting = 4.22"
[Tue Jun 11 02:38:08 2013] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.040
[Tue Jun 11 02:38:08 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 4.22"
[Tue Jun 11 03:10:58 2013] fullrun_mos1_xmm0110970301_pi300-10000_cl_pass1_src12.ximg exists
[Tue Jun 11 03:10:58 2013] fullrun_mos1_xmm0110970301_pi300-10000_cl_pass1_src12_1.ximg exists
[Tue Jun 11 03:10:58 2013] Fit fullrun_mos1_xmm0110970301_pi300-10000_cl_pass1_src12 appears to have run properly
[Tue Jun 11 03:10:58 2013] fullrun_mos1_xmm0110970301_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Tue Jun 11 03:10:58 2013] fullrun_mos1_xmm0110970301_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Jun 11 03:10:58 2013] Fit fullrun_mos1_xmm0110970301_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Tue Jun 11 03:40:04 2013] Spatial fit model total counts = 36.319400, observed total counts = 37.000000
[Tue Jun 11 03:40:04 2013] Offset between fit and detection position for source 12 = 0.208003 pixels
[Tue Jun 11 03:40:04 2013] 37.306400 total counts/ 20.048600 bgd. counts: snr = 3.854281
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.208003 pixels
  Position = (453.1, 264.8) = 3 12 50.92 -55 17 25.9
  Extent = 8.4 (6.3-16.9)" x 1.8 (1.8-1.8)", rotation angle = 93 (90-90) degrees
  Source counts = 17.3 +/- 6.1
  Background counts = 20.0
  Rate = 0.002 +/- 0.0007
[Tue Jun 11 03:40:04 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 03:40:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 03:40:04 2013] Assessing source extent using major axis lower bound
[Tue Jun 11 03:40:04 2013] Source does appear to be extended
[Tue Jun 11 03:40:04 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.52
[Tue Jun 11 03:40:04 2013] Source is asymmetric
[Tue Jun 11 03:59:51 2013] XMMSAS src. selection expression = ellipse(39375.005940, 22992.224780, 506.677215, 107.054403, 93.275539, X, Y)
[Tue Jun 11 03:59:51 2013] Writing source region out to fullrun_mos1_xmm0110970301_pi300-10000_pass1_cl_src12_src.reg
[Tue Jun 11 03:59:51 2013] Extracting stamp from image fullrun_mos1_xmm0110970301_pi300-10000_cl_sm2.00.img.gz, (424, 236) - (482, 294)
[Tue Jun 11 03:59:51 2013] XMMSAS bgd. selection expression = annulus(39375.005940, 22992.224780, 844.462024, 1688.924049, X, Y)
[Tue Jun 11 03:59:51 2013] Writing fullrun_mos1_xmm0110970301_pi300-10000_pass1_cl_src12.gif
[Tue Jun 11 04:03:08 2013] Mean detx,y = (2986.00, -14421.31) 
[Tue Jun 11 04:03:10 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 11 04:03:18 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 11 04:03:18 2013] Setting source spectrum file to fullrun_mos1_xmm0110970301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue Jun 11 04:03:18 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0110970301_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Tue Jun 11 04:05:58 2013] Not generating rmf since there are only 17 counts
[Tue Jun 11 04:05:58 2013] rmf not generated due to insufficient counts
[Tue Jun 11 04:14:05 2013] Updating aperture counts using extracted products
[Tue Jun 11 04:14:05 2013] Total counts from fullrun_mos1_xmm0110970301_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 16.00
[Tue Jun 11 04:14:05 2013] Total counts from fullrun_mos1_xmm0110970301_pi300-10000_pass1_cl_src12_bgd.pi.gz = 80.00
[Tue Jun 11 04:14:05 2013] Got source and background scale factors 168000.000000, 6606880.000000
[Tue Jun 11 04:14:05 2013] User source parameters:
  Position = (453.1, 264.8) = 3 12 50.92 -55 17 25.9
  Extent = 8.4 (6.3-16.9)" x 1.8 (1.8-1.8)", rotation angle = 93 (90-90) degrees
  Source aperture counts = 14.0 +/- 5.1
  Background aperture counts = 2.0
  Rate = 0.002 +/- 0.0006

[Tue Jun 11 04:14:07 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 11 04:14:07 2013] Using photon index=1.80, rate=0.00203, arf fullrun_mos1_xmm0110970301_pi300-10000_pass1_cl_src12.arf
[Tue Jun 11 04:14:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 11 04:14:07 2013] Updating source flux to 9e-14
[Tue Jun 11 04:14:14 2013] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jun 11 04:14:15 2013] xmm0110970301/analysis//spectral/fullrun_mos1_xmm0110970301_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete