[Sun Jul 29 10:13:11 2012] Detection parameters:
  Position = (334.8, 177.2) = 3 13 51.16 -55 18 38.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.7 +/- 7.4
  Background counts = 2.5
  Rate = 0.008 +/- 0.002

[Sun Jul 29 10:13:11 2012] Off-axis axis estimate = 9.18'
[Sun Jul 29 11:08:49 2012] Using EEF radius (= 11.02 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 11:08:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 29 11:08:49 2012] Initial guess for spatial extent in simple fitting = 11.02"
[Sun Jul 29 11:08:49 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.978
[Sun Jul 29 11:08:49 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.02"
[Sun Jul 29 11:28:59 2012] fullrun_mos2_xmm0110970201_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jul 29 11:28:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110970201_pi300-10000_cl_pass0_src3.csv
[Sun Jul 29 11:28:59 2012] fullrun_mos2_xmm0110970201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jul 29 11:28:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110970201_pi300-10000_cl_pass0_src3.csv
[Sun Jul 29 11:28:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110970201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110970201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 11:28:59 2012] fullrun_mos2_xmm0110970201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jul 29 11:28:59 2012] fullrun_mos2_xmm0110970201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jul 29 11:28:59 2012] Fit fullrun_mos2_xmm0110970201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Jul 29 11:29:10 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 14.788981 pixels away
[Sun Jul 29 11:29:10 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 11:29:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 11:29:10 2012] Assessing source extent using major
[Sun Jul 29 11:29:10 2012] Source does appear to be extended
[Sun Jul 29 11:29:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 12:21:03 2012] Using EEF radius (= 11.02 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 12:21:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 29 12:21:03 2012] Initial guess for spatial extent in simple fitting = 11.02"
[Sun Jul 29 12:21:03 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.978
[Sun Jul 29 12:21:03 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.02"
[Sun Jul 29 12:37:11 2012] fullrun_mos2_xmm0110970201_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jul 29 12:37:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110970201_pi300-10000_cl_pass1_src3.csv
[Sun Jul 29 12:37:11 2012] fullrun_mos2_xmm0110970201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jul 29 12:37:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110970201_pi300-10000_cl_pass1_src3.csv
[Sun Jul 29 12:37:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110970201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110970201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 12:37:11 2012] fullrun_mos2_xmm0110970201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jul 29 12:37:11 2012] fullrun_mos2_xmm0110970201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jul 29 12:37:11 2012] Fit fullrun_mos2_xmm0110970201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Jul 29 12:37:26 2012] Spatial fit model total counts = 65.936200, observed total counts = 66.000000
[Sun Jul 29 12:37:26 2012] Offset between fit and detection position for source 6 = 0.079074 pixels
[Sun Jul 29 12:37:26 2012] 65.296000 total counts/ 46.617200 bgd. counts: snr = 2.735747
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.079074 pixels
  Position = (334.9, 177.2) = 3 13 51.13 -55 18 38.1
  Extent = 3.5 (2.8-4.9)", rotation angle = 0
  Source counts = 18.7 +/- 8.1
  Background counts = 46.6
  Rate = 0.002 +/- 0.001
[Sun Jul 29 12:37:26 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 12:37:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 12:37:26 2012] Assessing source extent using major axis lower bound
[Sun Jul 29 12:37:26 2012] Source does appear to be extended
[Sun Jul 29 12:37:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 12:56:20 2012] XMMSAS src. selection expression = ellipse(29085.497020, 15368.800600, 211.188606, 211.188606, 0.000000, X, Y)
[Sun Jul 29 12:56:20 2012] Writing source region out to fullrun_mos2_xmm0110970201_pi300-10000_pass1_cl_src6_src.reg
[Sun Jul 29 12:56:20 2012] Extracting stamp from image fullrun_mos2_xmm0110970201_pi300-10000_cl_sm2.00.img.gz, (323, 165) - (347, 189)
[Sun Jul 29 12:56:20 2012] XMMSAS bgd. selection expression = annulus(29085.497020, 15368.800600, 351.981010, 703.962020, X, Y)
[Sun Jul 29 12:56:20 2012] Writing fullrun_mos2_xmm0110970201_pi300-10000_pass1_cl_src6.gif
[Sun Jul 29 12:56:59 2012] Mean detx,y = (3225.65, 9197.22) 
[Sun Jul 29 12:57:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 29 12:57:10 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 29 12:57:11 2012] Setting source spectrum file to fullrun_mos2_xmm0110970201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jul 29 12:57:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110970201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Jul 29 12:59:26 2012] Not generating rmf since there are only 18 counts
[Sun Jul 29 12:59:26 2012] rmf not generated due to insufficient counts
[Sun Jul 29 13:00:09 2012] Updating aperture counts using extracted products
[Sun Jul 29 13:00:10 2012] Error reading totcts from fullrun_mos2_xmm0110970201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jul 29 13:00:10 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 13:00:10 2012] Using photon index=1.80, rate=0.0022, arf fullrun_mos2_xmm0110970201_pi300-10000_pass1_cl_src6.arf
[Sun Jul 29 13:00:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 13:00:10 2012] Updating source flux to 6.9e-14
[Sun Jul 29 13:00:13 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jul 29 13:00:14 2012] xmm0110970201/analysis//spectral/fullrun_mos2_xmm0110970201_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete