[Wed May  1 08:18:39 2013] Detection parameters:
  Position = (278.0, 271.4) = 3 13 13.89 -55 4 20.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.7 +/- 7.5
  Background counts = 5.6
  Rate = 0.007 +/- 0.001

[Wed May  1 08:18:39 2013] Off-axis axis estimate = 2.46'
[Wed May  1 08:18:56 2013] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Wed May  1 08:18:56 2013] Initial guess for spatial extent in simple fitting = 7.66"
[Wed May  1 08:18:56 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.979
[Wed May  1 08:18:56 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 7.66"
[Wed May  1 08:18:57 2013] fullrun_pn_xmm0110970101_pi300-10000_cl_pass0_src14.ximg exists
[Wed May  1 08:18:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110970101_pi300-10000_cl_pass0_src14.csv
[Wed May  1 08:18:57 2013] fullrun_pn_xmm0110970101_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed May  1 08:18:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110970101_pi300-10000_cl_pass0_src14.csv
[Wed May  1 08:18:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110970101_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110970101_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 08:18:57 2013] fullrun_pn_xmm0110970101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed May  1 08:18:57 2013] fullrun_pn_xmm0110970101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed May  1 08:18:57 2013] Fit fullrun_pn_xmm0110970101_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Wed May  1 08:19:05 2013] Spatial fit model total counts = 65.448000, observed total counts = 68.000000
[Wed May  1 08:19:05 2013] Offset between fit and detection position for source 15 = 0.200221 pixels
[Wed May  1 08:19:05 2013] 66.541700 total counts/ 40.741600 bgd. counts: snr = 4.042056
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.200221 pixels
  Position = (278.2, 271.3) = 3 13 13.79 -55 4 20.3
  Extent = 3.9 (2.9-5.1)", rotation angle = 0
  Source counts = 25.8 +/- 8.2
  Background counts = 40.7
  Rate = 0.004 +/- 0.001
[Wed May  1 08:19:05 2013] Vigneting correction estimate = 1.000000
[Wed May  1 08:19:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 08:19:05 2013] Assessing source extent using major axis lower bound
[Wed May  1 08:19:05 2013] Source does appear to be extended
[Wed May  1 08:19:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 08:19:19 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  1 08:19:19 2013] Initial guess for spatial extent in simple fitting = 3.91"
[Wed May  1 08:19:19 2013] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.149
[Wed May  1 08:19:19 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 3.91"
[Wed May  1 08:19:20 2013] fullrun_pn_xmm0110970101_pi300-10000_cl_pass1_src13.ximg exists
[Wed May  1 08:19:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110970101_pi300-10000_cl_pass1_src13.csv
[Wed May  1 08:19:20 2013] fullrun_pn_xmm0110970101_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed May  1 08:19:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110970101_pi300-10000_cl_pass1_src13.csv
[Wed May  1 08:19:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110970101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110970101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 08:19:20 2013] fullrun_pn_xmm0110970101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed May  1 08:19:20 2013] fullrun_pn_xmm0110970101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed May  1 08:19:20 2013] Fit fullrun_pn_xmm0110970101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Wed May  1 08:19:28 2013] Spatial fit model total counts = 65.378800, observed total counts = 68.000000
[Wed May  1 08:19:28 2013] Offset between fit and detection position for source 15 = 0.007622 pixels
[Wed May  1 08:19:28 2013] 66.476900 total counts/ 40.659200 bgd. counts: snr = 4.048910
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.007622 pixels
  Position = (278.2, 271.3) = 3 13 13.79 -55 4 20.3
  Extent = 3.9 (2.9-5.1)", rotation angle = 0
  Source counts = 25.8 +/- 8.2
  Background counts = 40.7
  Rate = 0.004 +/- 0.001
[Wed May  1 08:19:28 2013] Vigneting correction estimate = 1.000000
[Wed May  1 08:19:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 08:19:28 2013] Assessing source extent using major axis lower bound
[Wed May  1 08:19:28 2013] Source does appear to be extended
[Wed May  1 08:19:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 08:19:42 2013] XMMSAS src. selection expression = ellipse(24156.019880, 23556.634400, 235.796407, 235.796407, 0.000000, X, Y)
[Wed May  1 08:19:42 2013] Not overwriting source region fullrun_pn_xmm0110970101_pi300-10000_pass1_cl_src15_src.reg
[Wed May  1 08:19:42 2013] Extracting stamp from image fullrun_pn_xmm0110970101_pi300-10000_cl_sm2.00.img.gz, (265, 258) - (292, 285)
[Wed May  1 08:19:42 2013] XMMSAS bgd. selection expression = annulus(24156.019880, 23556.634400, 392.994011, 785.988023, X, Y) && !ellipse(23757.184000, 24912.384000, 1173.856034, 1173.856034, 0.000000, X, Y)
[Wed May  1 08:19:42 2013] Writing fullrun_pn_xmm0110970101_pi300-10000_pass1_cl_src15.gif
[Wed May  1 08:22:46 2013] Mean detx,y = (961.04, -666.18) 
[Wed May  1 08:22:48 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  1 08:22:59 2013] Binned source spectrum to 10 counts/bin
[Wed May  1 08:22:59 2013] Setting source spectrum file to fullrun_pn_xmm0110970101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed May  1 08:22:59 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110970101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed May  1 08:30:18 2013] Not generating rmf since there are only 25 counts
[Wed May  1 08:30:18 2013] rmf not generated due to insufficient counts
[Wed May  1 08:48:26 2013] Updating aperture counts using extracted products
[Wed May  1 08:48:26 2013] Total counts from fullrun_pn_xmm0110970101_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 28.00
[Wed May  1 08:48:26 2013] Total counts from fullrun_pn_xmm0110970101_pi300-10000_pass1_cl_src15_bgd.pi.gz = 16.00
[Wed May  1 08:48:27 2013] Got source and background scale factors 174400.000000, 698438.000000
[Wed May  1 08:48:27 2013] User source parameters:
  Position = (278.2, 271.3) = 3 13 13.79 -55 4 20.3
  Extent = 3.9 (2.9-5.1)", rotation angle = 0
  Source aperture counts = 24.0 +/- 6.4
  Background aperture counts = 4.0
  Rate = 0.004 +/- 0.001

[Wed May  1 08:48:29 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 08:48:29 2013] Using photon index=1.80, rate=0.00404, arf fullrun_pn_xmm0110970101_pi300-10000_pass1_cl_src15.arf
[Wed May  1 08:48:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  1 08:48:29 2013] Updating source flux to 1.4e-14
[Wed May  1 08:48:39 2013] Source 15 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May  1 08:48:41 2013] xmm0110970101/analysis//spectral/fullrun_pn_xmm0110970101_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete