[Wed May  1 08:18:39 2013] Detection parameters:
  Position = (285.2, 149.2) = 3 13 10.26 -55 13 12.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.9 +/- 6.9
  Background counts = 4.3
  Rate = 0.004 +/- 0.001

[Wed May  1 08:18:39 2013] Off-axis axis estimate = 10.86'
[Wed May  1 08:18:56 2013] Using EEF radius (= 11.86 ")to estimate initial spatial extent for simple fitting
[Wed May  1 08:18:56 2013] Initial guess for spatial extent in simple fitting = 11.86"
[Wed May  1 08:18:56 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.865
[Wed May  1 08:18:56 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 11.86"
[Wed May  1 08:18:57 2013] fullrun_pn_xmm0110970101_pi300-10000_cl_pass0_src9.ximg exists
[Wed May  1 08:18:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110970101_pi300-10000_cl_pass0_src9.csv
[Wed May  1 08:18:57 2013] fullrun_pn_xmm0110970101_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed May  1 08:18:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110970101_pi300-10000_cl_pass0_src9.csv
[Wed May  1 08:18:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110970101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110970101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 08:18:57 2013] fullrun_pn_xmm0110970101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed May  1 08:18:57 2013] fullrun_pn_xmm0110970101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed May  1 08:18:57 2013] Fit fullrun_pn_xmm0110970101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed May  1 08:19:05 2013] Warning, spatial fit 9 centroid is now closest to src. 28
[Wed May  1 08:19:05 2013] Vigneting correction estimate = 1.000000
[Wed May  1 08:19:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 08:19:05 2013] Assessing source extent using major
[Wed May  1 08:19:05 2013] Source does appear to be extended
[Wed May  1 08:19:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 08:19:19 2013] Using EEF radius (= 11.86 ")to estimate initial spatial extent for simple fitting
[Wed May  1 08:19:19 2013] Initial guess for spatial extent in simple fitting = 11.86"
[Wed May  1 08:19:19 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.865
[Wed May  1 08:19:19 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 11.86"
[Wed May  1 08:19:19 2013] fullrun_pn_xmm0110970101_pi300-10000_cl_pass1_src9.ximg exists
[Wed May  1 08:19:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110970101_pi300-10000_cl_pass1_src9.csv
[Wed May  1 08:19:19 2013] fullrun_pn_xmm0110970101_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed May  1 08:19:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110970101_pi300-10000_cl_pass1_src9.csv
[Wed May  1 08:19:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110970101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110970101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 08:19:20 2013] fullrun_pn_xmm0110970101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed May  1 08:19:20 2013] fullrun_pn_xmm0110970101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed May  1 08:19:20 2013] Fit fullrun_pn_xmm0110970101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed May  1 08:19:28 2013] Spatial fit model total counts = 60.999700, observed total counts = 61.000000
[Wed May  1 08:19:28 2013] Offset between fit and detection position for source 10 = 0.247291 pixels
[Wed May  1 08:19:28 2013] 61.032400 total counts/ 42.154000 bgd. counts: snr = 2.907675
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.247291 pixels
  Position = (285.0, 149.1) = 3 13 10.37 -55 13 12.1
  Extent = 4.6 (3.0-6.6)", rotation angle = 0
  Source counts = 18.9 +/- 7.8
  Background counts = 42.2
  Rate = 0.003 +/- 0.001
[Wed May  1 08:19:28 2013] Vigneting correction estimate = 1.000000
[Wed May  1 08:19:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 08:19:28 2013] Assessing source extent using major axis lower bound
[Wed May  1 08:19:28 2013] Source does appear to be extended
[Wed May  1 08:19:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May  1 08:19:42 2013] XMMSAS src. selection expression = ellipse(24747.883014, 12921.284600, 274.452960, 274.452960, 0.000000, X, Y)
[Wed May  1 08:19:42 2013] Not overwriting source region fullrun_pn_xmm0110970101_pi300-10000_pass1_cl_src10_src.reg
[Wed May  1 08:19:42 2013] Extracting stamp from image fullrun_pn_xmm0110970101_pi300-10000_cl_sm2.00.img.gz, (269, 133) - (301, 165)
[Wed May  1 08:19:42 2013] XMMSAS bgd. selection expression = annulus(24747.883014, 12921.284600, 457.421599, 914.843199, X, Y)
[Wed May  1 08:19:42 2013] Writing fullrun_pn_xmm0110970101_pi300-10000_pass1_cl_src10.gif
[Wed May  1 08:21:20 2013] Mean detx,y = (1632.48, -11295.39) 
[Wed May  1 08:21:22 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May  1 08:21:29 2013] Binned source spectrum to 10 counts/bin
[Wed May  1 08:21:29 2013] Setting source spectrum file to fullrun_pn_xmm0110970101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed May  1 08:21:29 2013] Setting bgd. spectrum file to fullrun_pn_xmm0110970101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed May  1 08:29:59 2013] Not generating rmf since there are only 18 counts
[Wed May  1 08:29:59 2013] rmf not generated due to insufficient counts
[Wed May  1 08:48:26 2013] Updating aperture counts using extracted products
[Wed May  1 08:48:26 2013] Total counts from fullrun_pn_xmm0110970101_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 23.00
[Wed May  1 08:48:26 2013] Total counts from fullrun_pn_xmm0110970101_pi300-10000_pass1_cl_src10_bgd.pi.gz = 38.00
[Wed May  1 08:48:26 2013] Got source and background scale factors 240000.000000, 1968000.000000
[Wed May  1 08:48:26 2013] User source parameters:
  Position = (285.0, 149.1) = 3 13 10.37 -55 13 12.1
  Extent = 4.6 (3.0-6.6)", rotation angle = 0
  Source aperture counts = 18.4 +/- 5.9
  Background aperture counts = 4.6
  Rate = 0.003 +/- 0.0009

[Wed May  1 08:48:29 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 08:48:29 2013] Using photon index=1.80, rate=0.00295, arf fullrun_pn_xmm0110970101_pi300-10000_pass1_cl_src10.arf
[Wed May  1 08:48:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May  1 08:48:29 2013] Updating source flux to 2e-14
[Wed May  1 08:48:39 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May  1 08:48:41 2013] xmm0110970101/analysis//spectral/fullrun_pn_xmm0110970101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete